HARBOR BREEZE 42073
User Manual: Harbor Breeze Merrimack II 52-in Matte Bronze LED Indoor/Outdoor Ceiling Fan
Model: 42073
Brand: HARBOR BREEZE
Important Safety Information
Read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or serious personal injury.
- Ensure power is disconnected at the circuit breaker before installation or maintenance.
- All wiring must be in accordance with national and local electrical codes.
- Consult a qualified electrician if you are unsure about wiring.
- Mounting structure must be capable of supporting the fan's weight (23.7 lbs).
- Do not operate the fan with damaged blades.
Product Overview
The Harbor Breeze Merrimack II 52-inch Ceiling Fan is designed for both indoor and outdoor use, featuring a matte bronze finish and a seeded glass LED light kit. Its reversible blades offer versatility in aesthetic and airflow direction.
- Brand: HARBOR BREEZE
- Model: 42073
- Size: 52 inches
- Finish: Matte Bronze
- Light Source: LED (bulbs included)
- Blades: 5, reversible (Brown on one side / Bronze on the other side)
- Control Method: Pull Chain (Remote control capable, remote not included)
- Power Source: Corded Electric (120 Volts, 30 Watts)
- Weight: 23.7 Pounds
Figure 1: Front view of the Harbor Breeze Merrimack II ceiling fan with dark brown blades.
Figure 2: Front view of the Harbor Breeze Merrimack II ceiling fan with lighter wood grain blades, demonstrating the reversible blade feature.
Setup and Installation
Professional installation is recommended for optimal safety and performance. Ensure the mounting structure can support the fan's weight.
1. Pre-Installation Checks
- Verify all components are present (refer to packaging contents).
- Turn off power at the main circuit breaker.
- Ensure the electrical box is securely mounted and rated for ceiling fan support.
2. Mounting the Fan
- Attach the mounting bracket to the electrical box using the provided screws.
- Secure the downrod assembly to the motor housing.
- Carefully lift the fan assembly and hang it on the mounting bracket.
3. Wiring Connections
- Connect the fan's electrical wires to the household wiring according to the wiring diagram in the full manual.
- Ensure all connections are secure and insulated with wire nuts.
4. Attaching Blades and Light Kit
- Attach the fan blades to the blade arms using the provided screws.
- Secure the blade arms to the motor housing.
- Install the LED bulbs into the light fixture.
- Attach the seeded glass shade to the light kit.
Figure 3: Detailed view of the seeded glass light kit, highlighting the unique texture and LED bulbs.
Operating Instructions
The Merrimack II fan is operated via pull chains for fan speed and light control. It also features a reversible airflow switch for seasonal use.
Fan Speed Control
- Locate the pull chain with the fan icon.
- Pull the chain repeatedly to cycle through fan speeds (High, Medium, Low, Off).
Light Control
- Locate the pull chain with the light bulb icon.
- Pull the chain to turn the light On or Off.
Reversible Airflow Switch
The fan features a slide switch on the motor housing to change the direction of blade rotation, optimizing airflow for different seasons.
- Summer Mode: Set the switch to allow blades to rotate counter-clockwise, pushing air downwards to create a cooling effect. (Typically indicated by a "sun" icon).
- Winter Mode: Set the switch to allow blades to rotate clockwise, drawing air upwards to circulate warm air. (Typically indicated by a "snowflake" icon).
- Note: Ensure the fan is completely stopped before changing the direction switch.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: Use a soft brush or lint-free cloth to clean the fan blades and light kit. Do not use abrasive cleaners as they may scratch the finish or glass.
- Blade Balance: If the fan wobbles, check that all blade screws are tight. Minor wobbling is normal.
- Light Bulb Replacement: Replace LED bulbs as needed. Ensure power is off before replacing.
- Outdoor Use: For outdoor installations, periodically check for any signs of wear or corrosion due to weather exposure. The fan is water resistant, but not waterproof.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan; Loose wire connections | Check circuit breaker; Verify all wiring connections are secure. |
| Fan wobbles excessively | Loose blade screws; Unbalanced blades | Tighten all blade screws; Use a balancing kit (not included) if necessary. |
| Light does not work | Loose wire connection; Faulty bulb | Check light kit wiring; Replace bulb. |
| Noisy operation | Loose mounting screws; Motor hum | Tighten all mounting screws; Motor hum is normal for some fans. |
Specifications
- Dimensions: 19"L x 60"W x 19"H
- Voltage: 120 Volts
- Wattage: 30 Watts
- Brightness: 2400 lumen
- Bulb Base: E26
- Water Resistance Level: Water Resistant
- Assembly Required: No (Professional installation recommended)
Warranty and Support
The manufacturer offers a limited lifetime warranty on this product, which excludes any glass components or changes in plated finishes (including peeling). For detailed warranty information or technical support, please refer to the full product manual or contact Harbor Breeze customer service.
- Customer Service: Refer to the contact information provided in your product packaging or on the official Harbor Breeze website.
- Protection Plans: Additional protection plans may be available for purchase from authorized retailers.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.