Introduction
Thank you for purchasing the HYPER TOUGH 100-LUMEN Pen Light. This ultra-bright, impact-resistant flashlight is designed for durability and convenience, making it an ideal tool for various tasks. This manual provides essential information for the safe and effective use of your new pen light.
Safety Information
- Always use the correct size and type of batteries as specified.
- Do not mix old and new batteries, or different types of batteries.
- Insert batteries correctly, observing polarity (+ and -).
- Remove batteries from the device if it will not be used for an extended period.
- Do not look directly into the LED light, as it can cause eye damage.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the flashlight.
Package Contents
- 1 x HYPER TOUGH 100-LUMEN Pen Light
- 2 x AAA Batteries (included)
Image: The HYPER TOUGH 100-LUMEN Pen Light displayed in its retail packaging, clearly showing the pen light itself and the two included AAA batteries.
Setup
Battery Installation
- Unscrew the tail cap of the pen light by turning it counter-clockwise.
- Insert two (2) AAA batteries into the battery compartment, ensuring the correct polarity (+ and -) as indicated inside the flashlight.
- Screw the tail cap back on clockwise until it is securely tightened.
Image: The HYPER TOUGH Pen Light disassembled, showing the main body, the unscrewed tail cap, and two AAA batteries ready for insertion, illustrating the battery installation process.
Operating Instructions
Turning On/Off
To turn the pen light on, firmly press the button located on the tail cap. Press the button again to turn the pen light off.
Using the Pocket Clip
The integrated pocket clip allows for easy attachment to pockets, belts, or other gear for convenient carrying and quick access.
Image: A close-up view of the HYPER TOUGH Pen Light, highlighting the sturdy pocket clip and the textured grip of the flashlight body.
Image: The fully assembled HYPER TOUGH Pen Light, showcasing its compact design and ready-to-use state.
Maintenance
- Cleaning: Wipe the exterior of the flashlight with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the light dims significantly or stops working. Follow the battery installation steps in the "Setup" section.
- Storage: Store the pen light in a cool, dry place. If storing for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Dead or improperly inserted batteries. | Replace batteries or ensure they are inserted with correct polarity. |
| Light is dim. | Low battery power. | Replace batteries. |
| Tail cap is loose. | Poor electrical contact. | Tighten the tail cap securely. |
Specifications
- Model: 20560
- Brightness: 100 Lumens
- Power Source: 2 x AAA Batteries (included)
- Light Source Type: LED
- Material: Aluminum
- Special Feature: Impact Resistant, Water Resistant
- Color: Black
- Item Weight: 3.17 ounces
- Package Dimensions: 7.52 x 4.33 x 0.83 inches
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Hyper Tough customer service. Specific warranty details are not provided in this manual.
For further assistance, please visit the official Hyper Tough website or contact their customer support line.