Jensen MPR2110 Digital Media Receiver User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Jensen MPR2110 Digital Media Receiver. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage. Keep this manual for future reference.

2. Product Features

• Built-in Bluetooth technology for hands-free calling and audio streaming.
• Integrated internal microphone for clear communication.
• Maximum power output of 200 Watts (50W x 4 channels).
• Front panel 3.5mm Auxiliary (AUX) input for external audio devices.
• Front panel USB port for media playback.
• Two pairs of RCA preamp outputs (Front + Rear) for external amplifiers.

3. Setup and Installation

3.1. Package Contents

Before installation, verify that all components are present:

• Jensen MPR2110 Digital Media Receiver
• Wiring Harness
• Remote Control
• Mounting Hardware (Sleeve, Removal Keys)

Figure 3.1: Included accessories: wiring harness, remote control, and removal tools.

3.2. Mounting the Receiver

The receiver is designed for standard DIN mounting. Ensure adequate space and proper ventilation. Professional installation is recommended.

Figure 3.2: Side view of the receiver illustrating the mounting bracket.

3.3. Wiring Connections

Connect the wiring harness according to the diagram provided with your vehicle's wiring. Ensure all connections are secure and properly insulated. Incorrect wiring can cause damage to the unit or vehicle.

• Yellow Wire: Constant 12V (Battery)
• Red Wire: Switched 12V (Accessory)
• Black Wire: Ground
• Blue Wire: Remote Turn-On (for external amplifier or power antenna)
• Speaker Wires: Connect to vehicle speakers (ensure correct polarity).
• RCA Outputs: Connect to external amplifiers if used.
• Antenna Input: Connect vehicle's radio antenna.

Figure 3.3: Rear view of the receiver with wiring harness port, RCA outputs, and antenna input.

4. Operating Instructions

4.1. Front Panel Controls

Figure 4.1: Front panel overview of the Jensen MPR2110.

The front panel features a display and various buttons for controlling the receiver's functions:

• Power/Mode Button: Press to turn on/off. Press repeatedly to cycle through audio sources (Tuner, Bluetooth, USB, AUX).
• Volume Knob: Rotate to adjust volume. Press to access audio settings (Bass, Treble, Balance, Fader, EQ).
• AS/PS (Auto Store/Preset Scan) Button: In Tuner mode, press and hold to auto-store strong stations. Press briefly to scan presets.
• BAND Button: In Tuner mode, press to select radio bands (FM1, FM2, FM3, AM1, AM2).
• Skip/Track Buttons (◀◀ / ▶▶): Skip tracks in media playback or tune radio stations.
• Call/End Call Buttons: For Bluetooth hands-free operation.
• USB Port: Connect USB storage devices for media playback.
• AUX Input: Connect external audio sources via a 3.5mm cable.
• EQ Presets: Buttons for Flat, Class, Pop, Rock equalizer settings.

4.2. Basic Operation

1. Power On/Off: Press the Power/Mode button.
2. Volume Adjustment: Rotate the Volume knob.
3. Source Selection: Press the Power/Mode button repeatedly to switch between Tuner, Bluetooth, USB, and AUX.

4.3. Bluetooth Operation

1. Pairing:
   • Ensure Bluetooth is enabled on your mobile device.
   • Select Bluetooth mode on the receiver. The display will show "PAIRING".
   • On your mobile device, search for Bluetooth devices and select "JENSEN MPR2110".
   • Once paired, the display will show "CONNECTED".
2. Hands-Free Calling:
   • When a call comes in, press the Call button to answer.
   • Press the End Call button to end a call.
3. Audio Streaming:
   • After pairing, audio from your device will stream to the receiver.
   • Use the Skip/Track buttons to navigate tracks.

4.4. USB Operation

1. Insert a USB storage device into the front USB port.
2. The receiver will automatically switch to USB mode and begin playback.
3. Use the Skip/Track buttons to navigate tracks.

4.5. AUX Input Operation

1. Connect an external audio device to the front panel 3.5mm AUX input.
2. Select AUX mode using the Power/Mode button.
3. Control playback from the connected device.

4.6. Radio Tuner Operation

1. Select Tuner mode using the Power/Mode button.
2. Press the BAND button to select FM1, FM2, FM3, AM1, or AM2.
3. Manual Tuning: Press the Skip/Track buttons briefly to tune step-by-step.
4. Seek Tuning: Press and hold the Skip/Track buttons to automatically seek the next strong station.
5. Auto Store: Press and hold the AS/PS button to automatically scan and store the strongest stations into presets.

5. Maintenance

To ensure optimal performance and longevity of your Jensen MPR2110 receiver, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the front panel. Avoid abrasive cleaners or solvents.
• USB Port: Keep the USB port free of dust and debris.
• Temperature: Avoid exposing the unit to extreme temperatures or direct sunlight for extended periods.

6. Troubleshooting

If you encounter issues with your receiver, refer to the following common problems and solutions:

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the official Jensen website or contact their customer service directly. Keep your proof of purchase for warranty claims.

Online Support: www.jensenmobile.com