Flieks Full Size Wooden Daybed Instruction Manual

1. Introduction

Thank you for choosing the Flieks Full Size Wooden Daybed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new daybed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The Flieks Full Size Wooden Daybed is designed for versatility, functioning as both a comfortable bed and a stylish sofa. It features a solid wood frame with 10 wooden slats for mattress support and offers convenient under-bed storage space.

2. Safety Information

• Read and understand all instructions before assembly and use.
• Assembly requires two adults. Do not attempt to assemble alone.
• Ensure all hardware is securely tightened before using the daybed. Periodically check and re-tighten hardware as needed.
• Do not overtighten screws, as this may damage the wood.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Do not exceed the maximum weight capacity of 250 lbs (approximately 113 kg).
• Use only the recommended mattress size for a full-size bed.
• Avoid standing or jumping on the daybed.

3. Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Daybed Frame Components (Headboard, Footboard, Side Rails)
• 10 Wooden Slats
• Hardware Pack (screws, bolts, washers, Allen key)
• Assembly Instructions (this document)

Image 3.1: Overview of daybed frame components and wooden slats.

Image 3.2: Detailed view of the daybed frame structure.

4. Setup and Assembly Instructions

Assembly is required for this daybed. Please follow these steps carefully. It is recommended to have two people for assembly.

1. Prepare the Area: Clear a spacious area for assembly. Lay out all components and hardware on a soft, clean surface to prevent scratches.
2. Identify Parts: Refer to the included parts diagram (if provided in your package) to identify each component.
3. Assemble Side Rails: Attach the side rails to the headboard and footboard using the provided bolts and Allen key. Do not fully tighten the bolts at this stage; leave them slightly loose for adjustment.
4. Install Support Slats: Once the main frame is assembled, place the 10 wooden slats evenly across the support beams. Secure each slat using the designated screws.
5. Final Tightening: Once all components are in place and aligned, carefully tighten all bolts and screws until secure. Do not overtighten.

Image 4.1: Example of a frame joint connection.

5. Operating Instructions

Your Flieks Full Size Wooden Daybed is designed for dual functionality:

• As a Bed: Place a standard full-size mattress directly onto the wooden slats. No box spring is required.
• As a Sofa: Arrange pillows and cushions against the back and side rails to transform the daybed into a comfortable seating area.
• Under-bed Storage: The daybed offers 9.6 inches of clearance underneath, providing ample space for storage bins or drawers (not included) to keep your room organized.

6. Maintenance

To ensure the longevity and appearance of your Flieks Wooden Daybed, follow these maintenance guidelines:

• Cleaning: Wipe the wooden surfaces with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, which can damage the finish.
• Hardware Check: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause wood to fade or crack. Position the daybed away from direct sunlight or use window coverings.
• Protect from Spills: Promptly wipe up any spills to prevent staining or damage to the wood finish.

7. Troubleshooting

If you encounter any issues with your daybed, refer to the following common problems and solutions:

• Issue: Daybed feels unstable or wobbly.

  Solution: Ensure all bolts and screws are fully tightened. Re-check assembly steps to confirm all components are correctly installed. Uneven flooring can also contribute; consider using furniture pads under the legs.

• Issue: Wooden slats appear weak or break.

  Solution: Verify that the total weight on the daybed does not exceed the specified limit of 250 lbs. Ensure the mattress is evenly distributed across the slats. Contact customer support for replacement parts if necessary.

• Issue: Difficulty aligning parts during assembly.

  Solution: Do not fully tighten any screws until all major components are loosely assembled. This allows for minor adjustments. A second person can assist in holding parts steady during alignment.

8. Specifications

Image 8.1: Dimensional diagram of the daybed.

9. Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact the seller directly. If you have any questions, require assistance with assembly, or need replacement parts, please reach out to Flieks customer support through the retailer where the product was purchased.