Caspr ReSPR 3001 Air Purifier and Sanitizer

Introduction

The Caspr ReSPR 3001 is an advanced air purification and sanitization device designed to improve indoor air quality. It utilizes Natural Catalytic Converter (NCC) technology and Photo Catalytic Oxidation (PCO) to reduce odors, visible smoke, and microbial populations in the air and on surfaces. This manual provides essential information for the safe and effective use of your ReSPR 3001 unit.

Safety Information

Please read all safety instructions before operating the device to prevent injury or damage. Keep this manual for future reference.

• Ensure the power supply matches the device's requirements.
• Do not block air intake or output vents.
• Keep the device away from water or excessive moisture.
• Do not attempt to service the unit yourself. Refer all servicing to qualified personnel.
• Unplug the device before cleaning or performing maintenance.

Product Overview

Familiarize yourself with the components of your ReSPR 3001 unit.

A black rectangular air purifier with a front grille, a digital display showing '3000 ft', and control buttons for power, fan, purifier, and mode settings.

Key Components:

• Front Grille: Air intake and output.
• Control Panel: Digital display and buttons for operation.
• Power Button: Turns the unit on or off.
• Fan Control: Adjusts fan speed.
• Purifier Control: Activates or deactivates purification functions.
• Away Mode: Special operating mode.
• Reminder/Reset: For maintenance reminders and resetting.

Setup

Follow these steps to set up your ReSPR 3001 unit.

1. Unpack: Carefully remove the unit from its packaging. Retain packaging for future transport or storage.
2. Placement: Place the ReSPR 3001 on a flat, stable surface in the desired area. For optimal performance, ensure there is adequate space around the unit for air circulation. The device is effective for areas up to 2500 square feet.
3. Power Connection: Plug the power cord into a suitable electrical outlet.

Operating Instructions

The ReSPR 3001 can be operated via its control panel, remote control, or a dedicated app.

Control Panel Operation:

1. Power On/Off: Press the Power button to turn the unit on or off.
2. Adjust Fan Speed: Use the Fan +/- buttons to increase or decrease the fan speed. The current setting will be displayed.
3. Purifier Settings: Press the Purifier button to cycle through purification intensity levels (Normal/High).
4. Away Mode: Activate Away Mode for enhanced sanitization when the area is unoccupied. Refer to specific guidelines for safe use of this mode.
5. Reminder/Reset: This button is used to acknowledge maintenance reminders and reset indicators after performing maintenance.

Remote Control and App Operation:

The device supports control via a remote and a dedicated mobile application. Refer to the separate instructions provided with the remote control or the app for detailed usage.

Maintenance

Regular maintenance ensures optimal performance and longevity of your ReSPR 3001.

1. Cleaning the Exterior: Unplug the unit. Wipe the exterior surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.
2. Filter Maintenance: The ReSPR 3001 utilizes UV light for purification. Periodically check the UV light module as per manufacturer recommendations. Replacement intervals will vary based on usage.
3. Resetting Reminders: After performing any required maintenance, press the Reminder/Reset button on the control panel to clear the maintenance indicator.

Troubleshooting

If you encounter issues with your ReSPR 3001, refer to the following common problems and solutions.

• Unit does not power on:
  • Ensure the power cord is securely plugged into both the unit and a working electrical outlet.
  • Check if the power outlet is functional by plugging in another device.
• Reduced air purification effectiveness:
  • Check if the UV light module requires replacement.
  • Ensure air intake and output vents are not obstructed.
  • Verify the purifier settings are appropriate for the room size.
• Unusual noise:
  • Ensure the unit is placed on a stable, level surface.
  • Check for any foreign objects obstructing the fan.

If the problem persists after attempting these solutions, contact customer support.

Specifications

Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or service inquiries, please contact the manufacturer:

Manufacturer: ACN Infotech Private Limited Hyderabad- Branch Office
Plot#1100, 2nd Floor, Above SBH Bank – Platinum Branch, Rd#36, Jubilee Hills, Hyderabad, Telangana, INDIA – 500033
Tel: +91-40-32953556