DNP QW410

Download PDF
Contents

DNP QW410 Dye Sublimation Printer User Manual

Model: QW410

Introduction

This manual provides essential information for the setup, operation, and maintenance of your DNP QW410 Dye Sublimation Printer. Please read this manual thoroughly before using the printer to ensure proper function and longevity.

The DNP QW410 is a compact and lightweight dye sublimation printer designed for high-quality photo printing. It features a 4.5-inch print head for 16:9 aspect ratio printing and advanced curl minimization technology.

Package Contents

Before beginning setup, verify that all items are present in the package:

  • DNP QW410 Printer Unit
  • Paper Tray for 4x6" prints
  • Paper Hold
  • Power Cable
  • USB Cable
  • User Manual (this document)
DNP QW410 printer with included accessories: paper tray and paper hold.

Image: DNP QW410 printer unit shown with the paper tray and paper hold accessories.

Setup

1. Unpacking and Placement

  1. Carefully remove the printer and all accessories from the packaging.
  2. Place the printer on a stable, flat surface with adequate ventilation. Ensure there is enough space around the printer for proper operation and maintenance.

2. Connecting Power

  1. Connect the power cable to the power input port on the rear of the printer.
  2. Plug the other end of the power cable into a grounded electrical outlet.
Rear view of the DNP QW410 printer showing power input and USB port.

Image: Rear panel of the DNP QW410, highlighting the power input and USB 2.0 port.

3. Connecting to a Computer

  1. Connect one end of the USB cable to the USB 2.0 port on the rear of the printer.
  2. Connect the other end of the USB cable to an available USB port on your computer.
  3. Install the necessary printer drivers from the DNP official website or the provided installation media.

4. Loading Media (Paper and Ribbon)

  1. Open the top cover of the printer.
  2. Insert the paper roll onto the spindle, ensuring it is properly seated. The paper should feed from the top.
  3. Install the ribbon cassette into its designated slot. Ensure it clicks into place.
  4. Close the top cover securely.
  5. Place the paper tray onto the front of the printer.
DNP QW410 printer with top cover open, showing internal components for media loading.

Image: Top view of the DNP QW410 printer with the cover open, revealing the internal mechanism for loading paper and ribbon.

DNP QW410 printer with a paper roll and ribbon cassette next to it, ready for loading.

Image: DNP QW410 printer with a new paper roll and ribbon cassette, illustrating the media components.

Operating Instructions

1. Powering On/Off

  • To power on, press the power button located on the rear of the printer. The Power indicator light on the front panel will illuminate.
  • To power off, press and hold the power button until the printer shuts down.

2. Printing Photos

  • Ensure the printer is connected to your computer and drivers are installed.
  • Open the image you wish to print using your preferred photo editing or printing software.
  • Select the DNP QW410 as your printer.
  • Adjust print settings such as paper size (4x6" or 4.5x8"), print quality (300x300 dpi), and finish (glossy or matte) as desired.
  • Initiate the print command. The printer will begin processing and printing the image.

3. Print Quality and Speed

The QW410 offers superior print quality with 300x300 dpi resolution. It can produce 4x6" photos in approximately 19 seconds in High-Speed mode. The innovative mechanism minimizes print curl, ensuring prints lay flat.

4. Aspect Ratio Printing

Equipped with a unique 4.5-inch print head, the QW410 allows for printing in the 16:9 aspect ratio, ideal for wide-format images without cropping.

Maintenance

1. Cleaning the Printer

  • Regularly clean the exterior of the printer with a soft, dry, lint-free cloth.
  • For internal cleaning, refer to the detailed instructions in the full service manual or contact DNP support. Avoid using abrasive cleaners or solvents.

2. Replacing Media

  • When the paper roll or ribbon cassette is depleted, replace them with genuine DNP media.
  • Follow the media loading instructions in the Setup section.

Troubleshooting

This section addresses common issues you might encounter with your DNP QW410 printer. For more complex problems, please contact DNP technical support.

ProblemPossible CauseSolution
Printer not powering onPower cable not connected; Power outlet issueEnsure power cable is securely connected to printer and a working outlet.
Printer not recognized by computerUSB cable disconnected; Driver not installed or corruptedCheck USB connection. Reinstall printer drivers from DNP website.
Poor print qualityIncorrect media; Dirty print head; Low ribbon/paperEnsure correct DNP media is used. Clean print head (refer to service manual). Replace media if low.
Paper jamImproper media loading; Foreign object insideOpen printer cover and carefully remove jammed paper. Ensure media is loaded correctly.
Error light illuminatedVarious errors (e.g., media error, internal fault)Consult the printer's error code documentation (if available) or the DNP support website for specific error meanings and solutions.

Specifications

FeatureDetail
Model NameQW410
Printing TechnologyDye Sublimation
Maximum Print Resolution300 x 300 dpi
Print Speed (4x6")Approx. 19 seconds (High-Speed mode)
Supported Media Sizes4x6 inches, 4.5x8 inches
ConnectivityUSB 2.0 (Optional wireless dongle for wireless connectivity)
Compatible Operating SystemsWindows, Mac OS-X
Dimensions (W x H x D)8"W x 7.75"H x 9.5"D (approx.)
WeightApprox. 13 lbs (printer unit) / 15 lbs (shipping)
Power ConsumptionReduced compared to previous models (approx. 28% vs DS-RX1HS)
Finishing OptionsGlossy, Matte

Warranty Information

The DNP QW410 Dye Sublimation Printer comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product or visit the official DNP website. Keep your proof of purchase for warranty claims.

Customer Support

If you require further assistance, technical support, or have questions not covered in this manual, please contact DNP customer support. Visit the official DNP website for contact information, FAQs, and driver downloads.

Note: Always refer to the latest information available on the manufacturer's official website for the most up-to-date drivers, firmware, and support resources.

© 2025 DNP. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.