Audibax Neo STM-20 Desktop Speaker Stand

Introduction

The Audibax Neo STM-20 is a desktop speaker stand designed to optimize sound positioning and save space in your studio or listening environment. This stand features adjustable height and a robust steel alloy construction, providing stability and vibration reduction for your studio monitors or HiFi speakers.

Image: The Audibax Neo STM-20 speaker stand, illustrating its adjustable height feature with multiple height options shown.

Product Features

• Space-Saving Design: Optimizes desktop space while ensuring correct speaker positioning for improved sound projection.
• Great Stability: Equipped with non-slip rubber pads and robust reinforcement on each leg to maintain speaker balance during use.
• Vibration Reduction: Gripping rubber pads on the support plate significantly reduce unwanted vibrations, enhancing the listening experience.
• Versatile Positioning: Allows for both horizontal and vertical monitor placement, contributing to a tidy workspace.
• No Assembly Required: Ready to use out of the box, simplifying setup.
• Adjustable Height: Minimum height of 30 cm and maximum height of 37 cm.

Package Contents

The Audibax Neo STM-20 package typically includes:

• 1 x Audibax Neo STM-20 Desktop Speaker Stand

Note: Please check the product packaging for a complete list of contents.

Setup Instructions

The Audibax Neo STM-20 speaker stand is designed for immediate use and requires no assembly. Follow these steps to set up your stand:

1. Placement: Choose a stable, flat surface for the stand, such as a desk or studio console. Ensure the surface can support the weight of the stand and your speaker.
2. Height Adjustment: To adjust the height, locate the adjustment knob on the main column of the stand. Loosen the knob by turning it counter-clockwise.

Image: A close-up view of the stand's top plate and the height adjustment knob.

3. Set Desired Height: Carefully slide the upper part of the stand to your desired height between 30 cm and 37 cm.

Image: The speaker stand illustrating various possible height adjustments.

4. Secure Height: Once the desired height is reached, tighten the adjustment knob by turning it clockwise until it is firm and the stand is stable. Do not overtighten.
5. Speaker Placement: Carefully place your speaker onto the top plate of the stand. Ensure it is centered and stable. The non-slip rubber pads on the top plate will help secure the speaker and reduce vibrations.

Operating Instructions

Using your Audibax Neo STM-20 stand is straightforward:

• Speaker Positioning: Place your studio monitor or HiFi speaker directly onto the stand's top plate. The stand is designed to accommodate speakers for optimal sound projection.
• Orientation: You can position your monitors either horizontally or vertically on the stand, depending on your preference and the speaker's design.
• Height Optimization: Adjust the stand's height as described in the Setup section to ensure the speaker's tweeter is at ear level for the best listening experience.

Maintenance

To ensure the longevity and optimal performance of your Audibax Neo STM-20 speaker stand, follow these simple maintenance guidelines:

• Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth and then dry thoroughly. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all components, especially the height adjustment knob and the base, for any signs of wear or damage. Ensure the rubber pads are intact and providing adequate grip.
• Storage: If storing the stand for an extended period, ensure it is clean and dry. Store in a cool, dry place away from direct sunlight.

Troubleshooting

If you encounter any issues with your Audibax Neo STM-20 speaker stand, consider the following:

• Instability: If the stand feels unstable, ensure it is placed on a completely flat and level surface. Verify that the height adjustment knob is securely tightened. Check the non-slip rubber pads on the base and top plate for proper placement and condition.
• Excessive Vibrations: The stand is designed to reduce vibrations. If you experience excessive vibrations, ensure the speaker is placed centrally on the top plate and that the rubber pads are clean and making full contact with both the stand and the speaker.
• Difficulty Adjusting Height: If the height adjustment mechanism is stiff, ensure the knob is fully loosened. Do not force the adjustment. Check for any obstructions in the sliding mechanism.

If problems persist, please refer to the support information provided with your purchase or contact Audibax customer service.

Specifications

Image: The robust base and main column of the Audibax Neo STM-20 stand, featuring the brand logo.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Audibax website. Keep your proof of purchase for warranty claims.