1. Introduction
This manual provides essential instructions for the safe and efficient operation of your Naxa NVP-2000 150-Inch Home Theater 720p LCD Projector with Bluetooth. Please read this manual thoroughly before using the projector and retain it for future reference. The NVP-2000 projector is designed to deliver a large-screen viewing experience for movies, sports, and other media, featuring 720p native resolution, Bluetooth connectivity, and multiple input options.
Image 1.1: Front view of the Naxa NVP-2000 projector.
2. Safety Information
To ensure safe operation and prevent damage, observe the following precautions:
- Do not block ventilation openings. Ensure adequate space around the projector for proper airflow.
- Do not look directly into the projector lens when the lamp is on. The bright light can cause eye damage.
- Avoid placing the projector in direct sunlight, near heat sources, or in environments with high humidity or dust.
- Use only the power adapter supplied with the projector.
- Disconnect the power cord during lightning storms or when unused for long periods.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Product Overview
Familiarize yourself with the various parts and connections of your NVP-2000 projector.
Image 3.1: Labeled diagram of the Naxa NVP-2000 projector's ports and controls.
Key Components:
- Projector Lens: Emits the image onto the screen.
- Keystone Adjustment: Corrects trapezoidal distortion of the image.
- Focus Adjustment: Sharpens the image.
- Controls/Power Indicator: Buttons for basic operation and power status light.
- HDMI Input 1 & 2: Connect to HDMI-enabled devices (e.g., Blu-ray players, gaming consoles, laptops).
- 3.5mm AV Input: Connect to older devices using an AV cable.
- USB Port: Play media files from a USB flash drive.
- Micro SD Card Port: Play media files from a Micro SD card.
- 3.5mm Audio Output: Connect external speakers or headphones.
4. Setup
4.1 Placement
Place the projector on a stable, flat surface. Ensure the projector is positioned directly in front of the projection surface (wall or screen) for optimal image geometry. Maintain adequate distance for the desired screen size, typically between 31.9 inches and 150 inches diagonally.
4.2 Power Connection
- Connect the power adapter to the projector's DC IN port.
- Plug the power adapter into a standard electrical outlet.
- The power indicator light will illuminate.
4.3 Connecting Input Sources
- HDMI: Connect an HDMI cable from your source device (e.g., laptop, game console) to either HDMI Input 1 or 2 on the projector.
- AV: Connect an AV cable (not included) from your source device to the 3.5mm AV Input.
- USB/Micro SD: Insert a USB flash drive into the USB port or a Micro SD card into the Micro SD Card Port.
4.4 Focus and Keystone Adjustment
- Focus: Rotate the Focus Adjustment knob until the projected image appears sharp and clear.
- Keystone: If the image appears trapezoidal (wider at the top or bottom), adjust the Keystone Adjustment knob until the image is rectangular.
5. Operating Instructions
5.1 Powering On/Off
- Power On: Press the Power button on the projector or remote control. The power indicator will change.
- Power Off: Press the Power button again. Allow the projector to cool down before unplugging.
5.2 Source Selection
Press the 'Source' button on the projector or remote control to cycle through available input sources (HDMI 1, HDMI 2, AV, USB, Micro SD).
5.3 Bluetooth Connection
To connect external Bluetooth speakers:
- Ensure your Bluetooth speaker is in pairing mode.
- Navigate to the Bluetooth settings on the projector (refer to the on-screen menu).
- Select your Bluetooth speaker from the list of available devices to pair.
5.4 Menu Navigation
Use the directional buttons and 'OK' button on the projector or remote control to navigate the on-screen menu. Adjust settings such as picture mode, aspect ratio, and sound preferences.
5.5 Audio Output
The projector has built-in speakers. For enhanced audio, connect external speakers via the 3.5mm Audio Output port or wirelessly via Bluetooth.
6. Maintenance
6.1 Cleaning the Lens
Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive cleaners or excessive force, as this can scratch the lens.
6.2 General Care
- Keep the projector covered when not in use to prevent dust accumulation.
- Clean the exterior with a soft, dry cloth. Do not use liquid cleaners.
- Ensure ventilation ports are clear of obstructions to prevent overheating.
7. Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No image projected | Power not connected; incorrect input source; source device off. | Check power connection; select correct input source; ensure source device is on. |
| Image is blurry | Focus not adjusted; projector too close/far from screen. | Adjust the Focus Adjustment knob; reposition the projector. |
| Image is trapezoidal | Keystone not adjusted. | Adjust the Keystone Adjustment knob. |
| No sound or low volume | Volume too low; external speakers not connected/paired; source device volume low. | Increase projector volume; connect/pair external speakers; check source device volume. |
| Projector overheats | Blocked ventilation. | Ensure clear space around ventilation openings. |
8. Specifications
The following table details the technical specifications of the Naxa NVP-2000 projector.
| Feature | Specification |
|---|---|
| Model Number | NVP-2000 |
| Display Resolution | 1280 x 720 (Native) |
| Supported Resolutions | 1080p, 1080i, 720p, 576i, 480p, 480i |
| Contrast Ratio | 500:1 |
| Brightness | 3,600 Lumens / 100 ANSI |
| Image Size | 31.9 in. to 150 in. (diagonal) |
| Connectivity Technology | HDMI (x2), USB, 3.5mm AV, Micro SD, Bluetooth |
| Audio Output | 3.5mm Audio Jack, Bluetooth |
| Product Dimensions | 6.25 x 3.2 x 8.25 inches |
| Item Weight | 1.92 pounds |
9. Warranty and Support
9.1 Warranty Information
Naxa Electronics, Inc. provides a limited warranty for this product. In the event of a defect within one year of purchase, the company may offer repair or replacement. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Naxa customer support. Contact details can typically be found on the official Naxa website or product packaging.
