Introduction
Thank you for choosing the Lindby Joline LED Ceiling Lamp. This modern ceiling lamp, crafted from metal with a satin nickel finish, features energy-efficient LED technology and a unique twisted design. It is designed to provide pleasant illumination for various indoor spaces such as living rooms, dining rooms, bedrooms, kitchens, and hallways. This manual provides essential information for safe installation, operation, and maintenance of your new lamp.
Important Safety Instructions
- Electrical Installation: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Incorrect installation can lead to electric shock or fire.
- Power Disconnection: Always disconnect the main power supply at the circuit breaker before attempting any installation, maintenance, or cleaning.
- Voltage: Ensure the supply voltage matches the lamp's requirements (230V).
- Indoor Use Only: This lamp is designed for indoor use (IP20 rating). Do not expose it to moisture or wet conditions.
- Handling: Handle the lamp with care to avoid damage to the LED components or the metal structure.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
Package Contents
Please check that all components are present and undamaged before proceeding with installation.
- Lindby Joline LED Ceiling Lamp (with integrated LED light source)
- Mounting bracket
- Installation hardware (screws, wall plugs)
- Instruction Manual
Image: Overview of the Lindby Joline LED Ceiling Lamp components, showing the main lamp unit with its integrated LED driver and a separate mounting bracket.
Setup and Installation
Note: Installation should only be carried out by a qualified electrician. Ensure the power supply is disconnected before starting.
- Prepare the Installation Area: Choose a suitable location on the ceiling. Ensure the ceiling material can support the weight of the lamp.
- Mark Drilling Points: Hold the mounting bracket against the ceiling at the desired installation point and mark the drilling holes with a pencil.
- Drill Holes: Drill holes at the marked points. Insert appropriate wall plugs if necessary.
- Attach Mounting Bracket: Secure the mounting bracket to the ceiling using the provided screws.
- Electrical Connection: Connect the household electrical wires to the terminal block on the lamp's base. Ensure correct polarity (Live, Neutral, Earth). Refer to the wiring diagram if provided with the product.
- Mount the Lamp: Carefully align the lamp base with the mounting bracket and secure it using the screws or locking mechanism. Ensure all connections are firm and the lamp is stable.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Detail of the lamp's base, illustrating the connection area for electrical wiring.
Operating Instructions
The Lindby Joline LED Ceiling Lamp features an integrated dimming function that can be controlled via a standard wall switch.
- Switching On/Off: Use your standard wall switch to turn the lamp on or off.
- 3-Step Dimming: The lamp offers three brightness levels. To cycle through the dimming levels, quickly switch the lamp off and on again using your wall switch. Each quick toggle will change the brightness to the next level (e.g., 100% → 50% → 25% → 100%).
Image: The lamp illuminated at various brightness settings, illustrating the dimming capability.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your Lindby Joline LED Ceiling Lamp.
- Cleaning: Before cleaning, ensure the power supply is disconnected. Wipe the lamp gently with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the finish or electrical components.
- LED Light Source: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.
- Inspection: Periodically check the lamp for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | No power supply; loose wiring; faulty switch; integrated LED failure. | Check circuit breaker. Ensure all wiring connections are secure (power off first!). Test the wall switch. If LEDs are faulty, contact customer support. |
| Dimming function not working. | Incorrect operation; incompatible wall switch. | Ensure you are quickly toggling the standard wall switch. This lamp uses a sequential dimming method, not a traditional dimmer switch. |
| Flickering light. | Unstable power supply; loose connection; faulty LED driver. | Check power supply stability. Verify wiring connections. If flickering persists, contact customer support. |
Specifications
| Brand: | Lindby |
| Model Number: | 9639127 |
| ASIN: | B084BQWR8D |
| Manufacturer: | Lampenwelt |
| Material: | Metal |
| Color: | Satin Nickel |
| Dimensions (L x W x H): | 60 x 60 x 14.5 cm |
| Weight: | 850 g |
| Light Source Type: | Integrated LED |
| Total Wattage: | 36 Watts |
| Voltage: | 230V |
| IP Rating: | IP20 (Indoor use only) |
| Protection Class: | I |
| Control Method: | Push Button (via standard wall switch for dimming) |
| Installation Type: | Semi-flush mount / Ceiling mounting |
| Batteries Required: | No |
| Energy Efficiency Class: | F |
Image: Energy label indicating the lamp's energy efficiency class.
For detailed product data, refer to the EPREL database: https://eprel.ec.europa.eu/qr/742184
Warranty and Support
Lindby products are known for their high quality. For warranty claims or technical support, please contact your retailer or the manufacturer, Lampenwelt, directly. Keep your proof of purchase for warranty purposes.
For further assistance, you may visit the Lindby brand store or contact their customer service channels.
Image: Lindby brand logo.
