Joby Wavo Mobile Microphone User Manual

Introduction

The Joby Wavo Mobile is a compact and lightweight shotgun microphone designed to enhance audio quality for content creators using cameras and smartphones. It features a super-cardioid polar pattern, ensuring clear, directional audio capture by focusing on sounds directly in front of the microphone while minimizing ambient noise. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Wavo Mobile microphone.

What's in the Box

Upon unboxing your Joby Wavo Mobile, please verify that all components are present:

• Wavo Mobile Microphone

Setup

Follow these steps to properly set up your Joby Wavo Mobile microphone with your recording device.

1. Attaching to a Camera

The Wavo Mobile microphone can be easily mounted onto a camera's cold shoe mount. Ensure the microphone is securely fastened to prevent movement during recording.

2. Attaching to a Smartphone

For smartphone use, the Wavo Mobile can be attached to a smartphone rig or tripod with a cold shoe mount. Connect the appropriate 3.5mm TRRS cable (not always included, check product packaging) to your smartphone's audio jack or a compatible adapter if your phone lacks a 3.5mm port.

3. Connecting Cables

Use the provided 3.5mm cable to connect the microphone to your camera or smartphone. Ensure the connection is firm to avoid audio interruptions.

Operating Instructions

The Joby Wavo Mobile is designed for straightforward operation. No batteries are required as it is powered by your device.

1. Polar Pattern

The Wavo Mobile features a Super Cardioid polar pattern. This means it is highly directional, picking up sound primarily from the front and rejecting sounds from the sides and rear. Position the microphone to point directly at your sound source for optimal results.

2. Wind Protection

For outdoor recording or in windy conditions, attach the included furry windjammer (dead cat) to significantly reduce wind noise and plosives, ensuring clearer audio.

3. Monitoring Audio

If your camera or smartphone allows, monitor your audio with headphones during recording to ensure proper levels and sound quality. This helps identify and correct any issues in real-time.

Maintenance

Proper care will extend the life and performance of your Joby Wavo Mobile microphone.

• Cleaning: Use a soft, dry cloth to wipe the microphone body. Avoid using liquid cleaners or solvents.
• Storage: Store the microphone in a dry, dust-free environment when not in use.
• Cable Care: Avoid sharp bends or kinks in the audio cables to prevent damage.

Troubleshooting

If you encounter issues with your Joby Wavo Mobile, refer to the following common problems and solutions.

• No Audio Output:
  • Ensure the microphone cable is fully inserted into both the microphone and your recording device.
  • Check your camera or smartphone's audio input settings to ensure the external microphone is selected.
  • Test with a different cable if available.
• Poor Audio Quality / Excessive Noise:
  • Ensure the microphone is pointed directly at the sound source.
  • Use the furry windjammer in windy conditions.
  • Check for any electromagnetic interference from other devices.
  • Verify that your recording device's audio input levels are set correctly, avoiding clipping or overly low levels.

Specifications

Warranty Information

The Joby Wavo Mobile comes with a 1 Year Warranty. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the official Joby website or contact customer support.

Support Information

For technical assistance, product inquiries, or warranty support, please contact the authorized importer or manufacturer:

• Importer Contact: Srishti Digilife Pvt. Ltd., No. 7/3, Krishna Street, T. Nagar, Chennai-17. Email: info@srishtidigilife.co.in. Phone: +91 44 2815 4778.
• Manufacturer Contact: Vitec Co. Spa, Italy.