1. Product Overview
The Invacare Aquatec XL Bariatric Bath Lift is a battery-powered bathtub chair designed to assist individuals with limited mobility in and out of the bathtub. It features a reclining back support and a robust design to accommodate users up to 375 lbs.
This bath lift provides comfort, safety, and reassurance during bathing, incorporating increased leg room, ease of disassembly, and an ergonomic floating hand control with an efficient, lightweight battery.
Figure 1: Invacare Aquatec XL Bariatric Bath Lift, showing the main unit with seat and backrest in an upright position.
2. Safety Information
Read all instructions carefully before using the Invacare Aquatec XL Bariatric Bath Lift. Failure to follow safety guidelines may result in injury or damage to the product.
- Weight Capacity: Do not exceed the maximum weight capacity of 375 lbs (170 kg).
- Battery Safety: The lift has a built-in safety feature that prevents descent if there is insufficient charge to raise the user. Always ensure the battery is adequately charged before use.
- Installation: Ensure the bath lift is securely placed in the bathtub with all suction cups firmly attached before use.
- Supervision: Individuals requiring assistance should be supervised during operation.
- Water Exposure: The hand control is designed to be ergonomic and floating, but avoid submerging the main unit's electrical components.
- Disassembly: Only disassemble the unit as instructed for transport or cleaning.
3. What's in the Box
Upon unpacking, verify that all components are present:
- Aquatec XL - Heavy Duty Bath Lift (White)
- Hand Control (with integrated lithium ion battery)
4. Setup and Assembly
Follow these steps to set up your Aquatec XL Bath Lift:
- Positioning: Place the bath lift securely in the bathtub. Ensure the base is flat and stable.
- Suction Cups: Press down firmly on the bath lift to engage the self-releasing suction cups on the base. Verify that all suction cups are securely attached to the bathtub surface.
- Backrest: Ensure the backrest is properly aligned and secured to the main unit.
- Hand Control: Connect the hand control to the designated port on the bath lift. The hand control can be conveniently stored on the backrest when not in use.
- Initial Charge: Before first use, fully charge the hand control battery according to the charging instructions (refer to Section 5.1).
Figure 2: Key features of the Aquatec XL Bath Lift, including the high backrest, ergonomic floating pendant, reinforced lifting mechanism, textured wings, and stable base with suction cups.
5. Operating Instructions
5.1 Charging the Battery
The bath lift is powered by a lithium-ion battery integrated into the hand control. To charge:
- Connect the charger (not included in the 'What's in the Box' list, but typically supplied with the product) to the hand control and a power outlet.
- An indicator light on the hand control will show charging status.
- A full charge typically takes several hours. Do not overcharge.
Figure 3: Close-up view of the ergonomic hand control, showing the stop button and up/down controls.
5.2 Using the Bath Lift
To operate the bath lift:
- Lowering: Press and hold the "DOWN" button on the hand control to gently lower the seat into the bathtub. The minimum seat height is 2.5 inches (6.35 cm).
- Reclining: The backrest can recline up to 40 degrees for a comfortable bathing position. Adjust as needed using the controls.
- Raising: After bathing, press and hold the "UP" button to raise the seat to the desired height for easy transfer out of the tub. The maximum lifting height is 16.5 inches (41.9 cm).
- Stopping: Release the button to stop movement at any point. Use the "STOP" button for immediate halt.
Figure 4: An individual demonstrating the use of the Aquatec XL Bath Lift in a bathroom setting. Note: Transfer disk is not included with the product.
6. Maintenance and Care
Regular maintenance ensures the longevity and safe operation of your bath lift.
- Cleaning: Clean the bath lift regularly with a mild, non-abrasive cleaner and a soft cloth. Avoid harsh chemicals.
- Covers: The bath lift can be used with or without washable cover materials. If using covers, follow their specific washing instructions.
- Battery Care: Keep the battery charged. If storing for extended periods, charge the battery periodically to maintain its health.
- Inspection: Periodically inspect the unit for any signs of wear, damage, or loose components. Ensure suction cups are clean and functional.
- Disassembly for Cleaning/Transport: The unit can be easily disassembled into two parts with one hand for cleaning or transport. Refer to the assembly section for reassembly.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lift does not move down. | Insufficient battery charge to raise the user back up. | Charge the hand control battery fully. The safety feature prevents descent if there isn't enough power to ascend. |
| Lift does not respond to hand control. | Hand control not properly connected or battery is completely depleted. | Ensure the hand control is securely plugged in. Charge the battery. |
| Suction cups are not holding. | Bathtub surface is not clean or wet, or suction cups are worn. | Clean the bathtub surface thoroughly. Ensure the surface is wet before pressing down to engage suction cups. Replace worn suction cups if necessary. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 1573862 |
| Weight Capacity | 375 lbs (170 kg) |
| Minimum Seat Height | 2.5 inches (6.35 cm) |
| Maximum Lifting Height | 16.5 inches (41.9 cm) |
| Backrest Recline | Up to 40 degrees |
| Battery Type | 1 Lithium Ion (included) |
| Package Dimensions | 52 x 12 x 12 inches (132 x 30.5 x 30.5 cm) |
| Item Weight | 31.34 Pounds (14.2 kg) |
| Manufacturer | Invacare |
9. Warranty and Support
For warranty information, technical support, or replacement parts, please contact Invacare directly.
Invacare Customer Service: 1-800-333-6900
Please have your model number (1573862) and purchase date available when contacting support.
