1. Introduction
The Zooz ZEN30 800LR Z-Wave Long Range Double Switch is designed to control two loads independently from a single wall box. It features a dimmer for lighting and a relay for on/off control of devices such as fans. This device integrates with compatible Z-Wave hubs to provide advanced smart home functionality.
2. Safety Information and Precautions
- Indoor Use Only: This product is intended for indoor installation and use only.
- Neutral Wire Required: A neutral wire is mandatory for installation. Verify its presence before proceeding.
- Wattage Limits: Do not exceed 75 W for LED loads on the dimmer. For incandescent bulbs, the maximum load is 250 W. The relay supports a maximum load of 15 A.
- Incompatible Loads: Do not use the dimmer with tube lights, chandeliers, switched receptacles, or fans. The dimmer is not recommended for non-dimmable or DC applications.
- 3-Way/4-Way Installations: Do not connect this device to regular or add-on switches in 3-way or 4-way installations. Only virtual 3-way setups are supported via a Z-Wave hub.
- Environmental Conditions: Store the device in a dry, dust-proof, and mold-proof place prior to installation. Do not install in locations with direct sun exposure, high temperature, or high humidity.
- Chemicals and Heat: Keep away from chemicals, water, and dust. Ensure the device is never close to any heat source or open flame.
- No User Serviceable Parts: No part of the device may be replaced or repaired by the user.
3. Product Specifications
- Model Number: ZEN30 800LR
- Z-Wave Region: US, MX, CA
- Power: 110-120 V AC, 60 Hz
- Maximum Load for Dimmer: 75 W LED, 250 W incandescent
- Maximum Load for Relay: 15 A
- Z-Wave Range: Up to 100 feet line of sight (Z-Wave Long Range capable)
- Dimensions: 1.7" x 4.1" x 1.1"
- Operating Temperature: 32-104° F (0-40° C)
- Installation and Use: Indoor only
- Certifications: ETL certified, conforms with North American safety standards.
4. Features Overview
- Dual Control: Independently control two loads (one dimmable, one on/off) from a single switch.
- Smart Dimmer: Smooth brightness control for compatible LED and incandescent bulbs. Supports adjustable ramp rate and dimming speed.
- Powerful Relay: On/off control for high-load devices up to 15A, such as ceiling fans or exhaust fans (no speed control for fans).
- Z-Wave Long Range (800 Series): Enhanced range and faster signal speed for reliable communication. Acts as a signal extender in traditional mesh networks.
- Scene Control: Multi-tap functionality on both paddles for activating up to 18 unique scenes (supported by select hubs).
- Compact Design: 1.1" deep with pigtail wires for easy installation in shallow or crowded switch boxes.
- SmartStart Security: Simplified inclusion process for enhanced security.
Image: The Zooz ZEN30 800LR offers multiple functionalities including dimming, fan control, dry contact switching, and scene activation.
5. Installation
Important: Always turn off power at the circuit breaker before beginning any electrical work. A neutral wire is required for this device.
- Power Off: Locate the circuit breaker controlling the switch you intend to replace and turn off the power. Verify power is off using a voltage tester.
- Remove Existing Switch: Carefully remove the existing wall plate and switch. Disconnect the wires, noting their connections.
- Wiring: The ZEN30 800LR features pigtail wires for convenient connections. Connect the wires from the ZEN30 to your home's electrical wiring using wire nuts according to the provided wiring diagrams. Ensure all connections are secure.
- Neutral Wire: Connect the white pigtail wire from the ZEN30 to the neutral wire bundle in your electrical box.
- Line Wire: Connect the black pigtail wire from the ZEN30 to the line (hot) wire from your electrical panel.
- Dimmer Load: Connect the red pigtail wire from the ZEN30 to the load wire for your dimmable light fixture.
- Relay Load: Connect the blue pigtail wire from the ZEN30 to the load wire for your fan or other on/off device.
- Ground Wire: Connect the green ground wire from the ZEN30 to the ground wire in your electrical box.
- Mounting: Carefully fold the wires into the electrical box, ensuring they are not pinched. Mount the ZEN30 switch into the wall box using the provided screws. Its compact 1.1" depth allows for more room in crowded boxes.
- Wall Plate: Install your desired wall plate.
- Power On: Restore power at the circuit breaker.
Image: Key specifications for the Zooz ZEN30 800LR, highlighting the neutral wire requirement, dimmer wattage, and relay amperage.
Image: The compact design (1.1" deep) and pre-attached pigtail wires of the Zooz ZEN30 800LR simplify installation.
Image: Wiring configurations for the ZEN30, supporting single pole and virtual 3-way setups, but not direct 3-way wiring with standard switches.
6. Z-Wave Hub Setup and Pairing
The ZEN30 800LR requires a compatible Z-Wave hub for smart control. Compatible hubs include Home Assistant, Hubitat, SmartThings (with custom device driver), and Z-Box Hub. Smart speakers like Alexa are not Z-Wave controllers and require a Z-Wave hub for integration.
6.1. SmartStart Inclusion (Recommended)
If your Z-Wave hub supports SmartStart, you can easily add the device by scanning the QR code on the switch or its packaging using your hub's app. The device will automatically include into your network once powered on.
6.2. Manual Inclusion
To manually include the device into your Z-Wave network:
- Put your Z-Wave hub into inclusion mode.
- Tap the upper paddle of the dimmer switch three times quickly.
- The LED indicator will confirm successful inclusion.
Image: The Zooz ZEN30 800LR Double Switch and its packaging, showing the QR code for SmartStart registration. For extended warranty and more perks, visit getzooz.com/register.
Image: The 800 Series Z-Wave chip provides better range, S2 security, and faster response for a more reliable smart home experience.
Video: An overview of the Zooz Z-Wave Long Range Double Switch, highlighting its features and benefits for smart home integration.
Video: A detailed look at the Zooz ZEN30 Double Switch, demonstrating its functionality and how it can replace traditional stacked switches.
7. Operation
7.1. Manual Control
- Dimmer (Upper Paddle): Press the upper paddle to turn the light on/off. Press and hold to adjust brightness. Double-tap for full brightness.
- Relay (Lower Button): Press the lower button to turn the connected device (e.g., fan) on/off.
7.2. Smart Control via Z-Wave Hub
Once paired with a Z-Wave hub, you can control both the dimmer and relay remotely through your hub's interface or integrated smart assistants. The switch also supports advanced scene control:
- Multi-Tap for Scenes: Both the dimmer paddle and the relay button can be configured for multi-tap actions (e.g., double-tap, triple-tap) to trigger specific scenes or control other Z-Wave devices. This functionality depends on your hub's support for advanced scene input.
8. Advanced Configuration (Parameters)
The ZEN30 800LR offers extensive customization through Z-Wave parameters, accessible via your compatible Z-Wave hub (e.g., Hubitat, Home Assistant). These parameters allow you to fine-tune the switch's behavior:
- LED Indicator Mode & Color: Configure the behavior (on/off with switch, always on/off) and color (e.g., green) of the LED indicators for both the dimmer and relay.
- Dimmer Brightness: Set minimum and maximum brightness levels, and define custom brightness when turned on.
- Ramp Rate & Dimming Speed: Adjust how quickly the light dims up or down.
- Auto Turn-Off/Turn-On Timers: Set timers for automatic operation of the dimmer or relay.
- Paddle Orientation: Adjust if needed.
- Smart Bulb Mode: Enable specific modes for smart bulbs connected to the dimmer or relay.
- Behavior After Power Failure: Configure whether the dimmer/relay restores to its last state or a default state after a power outage.
9. Maintenance
The Zooz ZEN30 800LR Double Switch is designed for minimal maintenance. Keep the device clean and free from dust. Do not attempt to open or repair the device, as it contains no user-serviceable parts and doing so will void the warranty.
10. Troubleshooting
- Device Not Responding: Ensure the circuit breaker is on and the device is receiving power. Verify Z-Wave network connectivity. Try power cycling the switch by turning off the breaker for 30 seconds and then turning it back on.
- Inclusion Failure: Ensure your Z-Wave hub is in inclusion mode. Try moving the hub closer to the switch during the pairing process. If using manual inclusion, ensure you are tapping the paddle three times quickly.
- Lights Flickering/Not Dimming Correctly: Verify that the connected bulbs are dimmable LEDs or incandescent bulbs within the specified wattage limits. Non-dimmable bulbs will not function correctly with the dimmer. Adjust the minimum brightness parameter in your Z-Wave hub settings if flickering occurs at low levels.
- Fan Not Operating: Ensure the fan is connected to the relay (lower button) and not the dimmer. Verify the fan's power requirements are within the 15A limit of the relay.
- No 3-Way Functionality: The ZEN30 does not support direct 3-way wiring with standard switches. For 3-way control, a virtual 3-way setup using a compatible Z-Wave hub and another smart switch is required.
- Custom Driver for SmartThings: If using SmartThings, a custom device driver may be required for full functionality. Refer to the Zooz support page for details.
11. Warranty and Support
Register your Zooz product for an extended 5-year warranty. For detailed support, custom device drivers, or further assistance, please visit the official Zooz support page or contact their customer service. You can register your product at getzooz.com/register.
