Introduction
The STEELMATE 1 Vertical Rebar Stabilizer is designed to ensure accurate and stabilized placement of vertical rebar, particularly when transitioning from a concrete foundation to a vertical wall. This product is engineered for durability and reusability, offering a time and cost-effective solution for construction projects.
Key features include:
- Ideal for accurate placement of vertical rebar for foundation to wall construction.
- Durable and reusable design.
- Contributes to significant time and money savings.
- Provides the fastest method for accurately tying vertical rebar.
Product Overview
Each STEELMATE unit is a robust, safety orange-colored component made of steel, designed to securely hold rebar in place. The unique design allows for use with various rebar sizes and is suitable for different construction methods.
Setup and Installation
The STEELMATE system is designed for quick and accurate installation of vertical rebar. Follow these steps for optimal results:
Measure and Install:
- Measure for Rebar Layout: Use a 2x4 template to accurately measure and mark the rebar layout on your foundation. This ensures precise spacing for the vertical rebar.
- Attach STEELMATE: Place the STEELMATE units onto the 2x4 template. The units are designed to fit securely.
- Fasten All Tools: Securely fasten all STEELMATE units to the 2x4 template using 6D Duplex nails. This creates a stable and unified assembly.
- Clamp Rebar in Place: Position the vertical rebar into the STEELMATE units and clamp them securely. Repeat this process for all necessary rebar placements.
STEELMATE is compatible with rebar sizes 3, 4, 5, 6, 7, and 8, providing versatility for various project requirements.
Operating Instructions
Once installed, STEELMATE units provide a stable framework for pouring concrete, ensuring that vertical rebar remains straight and correctly positioned. This system is ideal for:
- Form & Pour construction.
- CMU (Concrete Masonry Unit) Block construction.
- ICF (Insulated Concrete Form) construction.
The system significantly reduces the time required for rebar setup, allowing for faster project completion and improved accuracy.
Maintenance and Reusability
STEELMATE units are designed for multiple uses, contributing to their cost-effectiveness. Proper removal ensures their longevity.
Removal and Reuse:
Individual Removal:
- Remove 6D Duplex Nail: Carefully remove the 6D Duplex nail from the 2x4 template.
- Use Hammer Claw: Use a hammer claw to lift off the STEELMATE tool from the rebar.
Template Removal:
- Leave All Tools Fastened: Keep all STEELMATE units fastened to the 2x4 template.
- Firmly Knock Off: Firmly knock off the entire 2x4 template with a hammer, ensuring all units detach cleanly.
After removal, clean any concrete residue from the STEELMATE units and store them in the provided bucket for future use. This practice ensures the tools remain in good condition for repeated applications.
Troubleshooting
While STEELMATE is designed for straightforward use, here are some common considerations:
- Rebar Not Fitting Securely: Ensure you are using rebar sizes 3, 4, 5, 6, 7, or 8. Verify that the rebar is properly seated within the STEELMATE's hooks.
- Template Instability: Make sure the 6D Duplex nails are fully driven and the 2x4 template is stable on the foundation. Uneven surfaces can affect stability.
- Difficulty Removing Units: If units are difficult to remove, ensure all nails are extracted first. For template removal, a firm, even strike with a hammer should dislodge the assembly.
- Damage to Units: Inspect units for any damage before reuse. While durable, extreme force or improper handling can cause wear. Discard any visibly damaged units to maintain structural integrity.
Specifications
| Attribute | Detail |
|---|---|
| Brand | STEELMATE |
| Model | STEELMATE 1 Bucket of 40 Pcs. |
| Material | Steel |
| Color | Safety Orange |
| Shape | Rectangular |
| Item Form | Bar |
| Compatible Rebar Sizes | 3, 4, 5, 6, 7, 8 |
| Manufacturer | STEELMATE |
| ASIN | B08467KHPV |
| Date First Available | January 24, 2020 |
Warranty Information
Specific warranty details for the STEELMATE 1 Bucket of 40 Pcs. are not provided in the product information. For any warranty-related inquiries, please contact the manufacturer directly using the support information below.
Support and Contact
For further assistance, technical support, or product inquiries, please contact STEELMATE:
- Manufacturer: STEELMATE
- Website: www.steelmate.com
- Address: 4020 Palos Verdes Dr. North, Ste. 205, Rolling Hills Estates, CA 90274, USA
- Product UPC: 0860002591605
Please refer to the product's packaging or the official STEELMATE website for the most current contact information and support resources.
