Maximus 2x10W LED Battery Projector User Manual

1. Product Overview

This portable, battery-powered LED projector features two 10W (700 lumen) light panels. Each panel can be illuminated independently, or both can be used simultaneously. The projector offers 360° rotation for versatile light positioning and operates on 4 LR6 alkaline batteries, which are included.

Figure 1: The Maximus 2x10W LED Battery Projector in its fully extended position, showcasing both illuminated LED panels.

2. Setup and Installation

2.1 Battery Installation

1. Locate the battery compartment on the underside of the projector.
2. Open the battery compartment cover.
3. Insert 4 new LR6 alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

2.2 Positioning the Projector

The projector features adjustable legs and 360° rotating light panels for optimal positioning.

• Extend the integrated legs to provide a stable base for the projector.
• Adjust the angle of the light panels by rotating them along their horizontal axis to direct light as needed.

Figure 2: The projector with one light panel folded, demonstrating its compact and adjustable design for various setup configurations.

3. Operation Guide

3.1 Powering On/Off

Locate the power button on the side of the projector.

• Press the power button once to turn on the first LED panel.
• Press the power button a second time to turn on the second LED panel (both panels illuminated).
• Press the power button a third time to turn off both LED panels.

Figure 3: Close-up view of the projector's side, highlighting the power button for easy operation.

3.2 Adjusting Light Direction

The individual light panels can be rotated 360° to direct light precisely where needed.

• Gently grasp the side of an LED panel.
• Rotate the panel to achieve the desired light angle.

4. Maintenance

4.1 Cleaning

To maintain optimal performance and appearance:

• Ensure the projector is turned off before cleaning.
• Wipe the exterior surfaces with a soft, dry cloth.
• For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals.

4.2 Battery Replacement

Replace batteries when the light output becomes dim or the projector fails to turn on. Always replace all 4 batteries simultaneously with new LR6 alkaline batteries.

4.3 Storage

When not in use for extended periods, remove the batteries to prevent leakage. Store the projector in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

5.1 Projector Does Not Turn On

• Check Batteries: Ensure batteries are inserted correctly with the correct polarity. Replace with new batteries if necessary.
• Battery Compartment: Make sure the battery compartment cover is securely closed.

5.2 Dim Light Output

• Low Batteries: The batteries may be running low. Replace all 4 LR6 alkaline batteries.
• Dirty Lenses: Clean the LED panel surfaces with a soft, dry cloth.

5.3 Panels Not Rotating Smoothly

• Obstruction: Check for any physical obstructions preventing smooth rotation.
• Debris: Ensure no dirt or debris is lodged in the rotating mechanism.

6. Technical Specifications

7. Important Information

7.1 Bulb Recycling

Please refer to local regulations and guidelines for recycling information concerning this and other types of bulbs.

7.2 Bulb Cleaning and Disposal

For more information on how to safely clean and dispose of broken or damaged bulbs, consult relevant safety guidelines or local waste management authorities.

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Maximus customer service through their official website or authorized retailers. Keep your proof of purchase for any warranty claims.