Master Lock 1500iD
Contents
Master Lock 1500iD Directional Combination Padlock User Manual
Model: 1500iD
1. Introduction
This manual provides comprehensive instructions for the Master Lock 1500iD Speed Dial Directional Combination Padlock. Please read this guide thoroughly to ensure proper setup, operation, and maintenance of your lock. This padlock is designed for indoor use, offering enhanced security with its unique directional combination mechanism.
2. Product Features
The Master Lock 1500iD padlock incorporates several features for security and ease of use:
- Directional Combination: Utilizes up, down, left, and right movements for faster and easier code entry compared to traditional dial locks.
- Set Your Own Combination: Allows users to personalize their combination for easy recall.
- Durable Construction: Features a 2-1/8 inch (54mm) wide metal body for strength.
- Hardened Steel Shackle: A 1/4 inch (6mm) diameter shackle, 1 inch (25mm) long, made of hardened steel for increased resistance to cutting and sawing.
- Anti-Shim Technology: The locking mechanism is designed with anti-shim technology for maximum security against manipulation.

Figure 1: Master Lock 1500iD Padlock Features. This image highlights the key components of the Master Lock 1500iD padlock: the hardened steel shackle for cut resistance, anti-shim technology for enhanced security, and the central dial for setting your own directional combination.
Intended Use
This padlock is designed for indoor applications where moderate security is required.

Figure 2: Indoor Use Applications. The Master Lock 1500iD is designed for indoor security, ideal for school lockers, gym lockers, cabinets, and employee lockers.
Limitations
The Master Lock 1500iD is not intended for outdoor use, as exposure to elements can affect its performance and longevity.

Figure 3: Not Intended for Outdoor Use. This padlock is not intended for outdoor use and should not be used on gates, fences, sheds, or outdoor storage units.
3. Setting Your Combination
Your Master Lock 1500iD padlock comes with a factory-set combination. You can easily reset it to a personal directional sequence of your choice. Follow these steps carefully:
- Open the Lock: Ensure the lock is in the open position.
- Locate Reset Lever: On the back of the lock, use a pointed object (like a pen tip) to slide the reset lever into the "up" position (towards the "R").
- Clear Mechanism: IMPORTANT: Insert the shackle into the lock and squeeze firmly twice to "clear" it.
- Open Lock Again: Pull up on the shackle to open the lock.
- Enter New Combination: With the lock open, enter your new desired directional combination (e.g., Up, Up, Down, Left, Right).
- Return Reset Lever: Slide the reset lever back to the "down" position.
- Secure New Combination: Insert the shackle into the lock and squeeze firmly.
- Test Combination: The lock will now open with your new combination. Test it a few times before securing any valuables.

Figure 4: How to Reset Your Combination. A step-by-step visual guide demonstrating how to reset your personal directional combination on the Master Lock 1500iD padlock.
Video 1: Master Lock 1500iD Directional Combination Lock Setup. This official video from Master Lock provides a visual guide on how to set and use the directional combination on your 1500iD padlock.
4. Operating the Padlock
Opening the Lock
- Ensure the shackle is fully closed and locked.
- Enter your personal directional combination using the central dial (e.g., Up, Up, Down, Left, Right).
- Once the combination is entered, pull up on the shackle to open the lock.
Closing and Locking
- Align the shackle with the lock body.
- Push the shackle down firmly until it clicks into place.
- Scramble the directional dial by moving it in a few random directions to secure the lock.
5. Maintenance
The Master Lock 1500iD padlock requires minimal maintenance to ensure long-lasting performance:
- Cleaning: Wipe the lock body and shackle with a soft, dry cloth to remove dust and grime. Avoid using abrasive cleaners or solvents.
- Lubrication: If the shackle or dial mechanism becomes stiff, a small amount of graphite lubricant or a silicone-based spray can be applied to the shackle opening and dial. Do not use oil-based lubricants as they can attract dirt.
- Storage: Store the padlock in a dry environment when not in use to prevent moisture buildup.
6. Troubleshooting
Lock Will Not Open
- Incorrect Combination: Double-check that you are entering the correct directional sequence. Ensure each movement is distinct.
- Incomplete Entry: Make sure you have completed the entire combination sequence.
- Stuck Mechanism: Apply light pressure to the shackle while entering the combination. If stiff, try lubricating as per the maintenance section.
- Combination Reset Issue: If you recently reset the combination and it's not working, carefully repeat the combination setting steps (Section 3) to ensure it was set correctly.
Shackle Is Stiff
- Clean any visible dirt or debris from around the shackle.
- Apply a small amount of graphite lubricant or silicone spray to the shackle entry points.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Master Lock |
| Model Name | 1500iD |
| Lock Type | Combination Lock (Directional) |
| Body Material | Aluminum |
| Shackle Material | Hardened Steel |
| Body Width | 2-1/8 in (54 mm) |
| Shackle Diameter | 1/4 in (6 mm) |
| Shackle Length | 1 in (25 mm) |
| Shackle Horizontal Clearance | 3/4 in (19 mm) |
| Overall Dimensions (L x W x H) | 1.25 x 2.13 x 3.75 inches |
| Item Weight | 0.15 kg |
| Special Feature | Keyless |
| Recommended Uses | Indoor Security (School Lockers, Gym Lockers, Cabinets) |

Figure 5: Product Dimensions. This diagram provides precise measurements of the Master Lock 1500iD padlock, including the shackle (1/4in diameter, 1in length) and the body (2-1/8in width, 3-5/8in height).
8. Warranty Information
The Master Lock 1500iD Directional Combination Padlock is backed by a Limited Lifetime Warranty. This warranty covers defects in material and workmanship for the life of the product. For specific terms, conditions, and to make a warranty claim, please refer to the official Master Lock website or contact their customer support.
9. Customer Support
For further assistance, troubleshooting, or to view additional product information, please visit the official Master Lock website:
You may also find helpful resources and FAQs on their support pages.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.