Introduction
The Geemarc Wake 'N' Shake Spot is a powerful alarm clock designed to effectively wake heavy sleepers and individuals with hearing impairments. It combines a loud alarm, a bright flashing light, and a vibrating pad to ensure you wake up. A unique feature is its red time projector, allowing you to display the time on your wall or ceiling.
Image: The Geemarc Wake 'N' Shake Spot alarm clock, showing its main unit with a digital display, a connected vibrating pad, and a red projected time on a surface. The display shows "12:00 AM" and "6:00 AM" for the alarm setting, along with icons for light, sound, and vibration.
Package Contents
- Geemarc Wake 'N' Shake Spot Alarm Clock
- Vibrating Pad
- Power Adapter
- User Manual
Setup
- Power Connection: Connect the provided power adapter to the DC IN port on the back of the alarm clock and plug it into a wall outlet.
- Vibrating Pad Connection: Plug the vibrating pad's cable into the dedicated port on the alarm clock. Place the vibrating pad under your pillow or mattress.
- Initial Time Setting: The display will light up. Follow the operating instructions to set the current time.
Operating Instructions
Setting the Time
- Press and hold the TIME SET button. The hour digits will flash.
- Use the HOUR and MINUTE buttons to adjust the time.
- Press TIME SET again to confirm and exit.
Setting the Alarm
- Press and hold the ALARM SET button. The alarm hour digits will flash.
- Use the HOUR and MINUTE buttons to set your desired alarm time.
- Press ALARM SET again to confirm.
- Use the ALARM MODE button to select your preferred alarm combination:
- Vibration only
- Vibration + Alarm Sound
- Vibration + Flashing Light
- Vibration + Alarm Sound + Flashing Light
Snooze Function
When the alarm sounds, press the large SNOOZE button to temporarily silence the alarm. The alarm will sound again after a set interval (adjustable from 5 to 60 minutes). If the alarm is not stopped, it will continue for one hour.
Time Projection
The Wake 'N' Shake Spot features a red time projector. Adjust the projector's angle (90° pivot, 180° tilt) to display the time on your wall or ceiling. Press the PROJECT button to turn the projection on or off.
Display Brightness and Night Light
Adjust the display brightness using the DIMMER button (3 levels). The white LED above the display can also function as a small night light; press the dedicated button to activate it.
Maintenance
- Cleaning: Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Storage: If storing for an extended period, disconnect the power adapter.
- Environment: Keep the alarm clock away from direct sunlight, heat sources, and excessive moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarm does not sound/vibrate. | Alarm is not set or alarm mode is incorrect. | Ensure alarm time is set and the desired alarm combination (vibration, sound, light) is selected. |
| Time projection is blurry or not visible. | Projector lens needs adjustment or surface is too far/bright. | Adjust the projector's angle and focus. Ensure the room is dark enough for clear projection. |
| Display is too dim or too bright. | Brightness setting is not optimal. | Press the DIMMER button to cycle through brightness levels. |
Specifications
- Brand: Geemarc
- Model Number: JWNS-SPOT_BLK_VDE
- Color: Black
- Dimensions (L x W x H): 30 x 3.81 x 10 cm (11.8 x 1.5 x 3.9 inches)
- Weight: 320 grams (0.7 lbs)
- Material: Plastic
- Alarm Sound Level: Up to 95dB
- Snooze Duration: 5 to 60 minutes (adjustable)
- Display Type: Digital
- Power Source: Corded Electric
Warranty and Support
For warranty information and technical support, please refer to the official Geemarc website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
Website: www.geemarc.com
