Introduction
This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your Barkan Full Motion Articulating TV Wall Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage to your television or the mount.
Safety Information
Always ensure that the wall structure can support the combined weight of the mount and the television. Use appropriate tools and follow all drilling and mounting instructions precisely. If you are unsure about any part of the installation, consult a qualified professional. The mount includes a Fall Proof system to prevent disengagement of the screen, enhancing child safety.
For detailed safety guidelines, please refer to the official Safety Information PDF provided by Barkan.
Package Contents
Before starting, verify that all components are present:
- TV Mount Assembly
- Hardware Kit (various screws, anchors, washers, spacers)
- Assembly Instructions (this manual)
If any parts are missing or damaged, please contact Barkan customer support.
Setup and Installation
The Barkan TV Wall Mount is designed for self, easy, and fast assembly. Follow these general steps:
- Attach Adapters to TV: Connect the TV plate adapters to the rear side of your television using the appropriate screws from the hardware kit. The mount is compatible with VESA patterns 75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x300, 300x400, 400x200, 400x300, 400x400 mm and non-VESA up to 400x400 mm.
- Install Bracket on Wall: Securely install the wall bracket onto your chosen wall location. A drilling template is included for accurate and fast installation. Ensure you are mounting into suitable wall types such as drywall with wood studs or concrete/brick walls.
- Snap TV onto Bracket: Carefully lift the television with the attached adapters and snap it onto the installed wall bracket. Ensure it is securely locked in place.
Figure 1: Easy 1-2-3 Assembly Steps
Figure 2: Drilling Template and Required Tools
Figure 3: Wall Compatibility Guide
Figure 4: Backscreen Connection Positioning Options
Figure 5: Barkan's Hardware Kit Components
Operating the Mount
The Barkan Full Motion mount offers versatile viewing angles with its articulating design:
- Rotation: The mount can rotate near the wall up to 180 degrees.
- Fold: The arms can fold 360 degrees.
- Swivel: Swivel the screen connection plate up to 180 degrees. For TVs up to 50 inches, a 90-degree swivel is possible.
- Tilt: Adjust the tilt from -5 degrees to +15 degrees without tools.
- Leveling: Fine-tune the screen leveling by +/-5 degrees after installation.
Easily rotate, swivel, or tilt the TV by gently pushing or pulling it to the desired angle. The mount also features cable covers on the extending arms for a clean, prestigious look and effective cable management.
Figure 6: Full Motion Capabilities
Figure 7: Detailed Full Motion Features
Figure 8: Determining Screen's Maximum Swivel Angle
Figure 9: Compatibility with Various Screen Types
Maintenance
To ensure the longevity and safe operation of your Barkan TV Wall Mount, periodic maintenance is recommended:
- Check Connections: Periodically inspect all screws and bolts to ensure they remain tight. Over time, vibrations or frequent adjustments may cause them to loosen.
- Clean Surfaces: Wipe down the mount with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- Lubrication: The articulating joints are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding contact with electrical components.
Troubleshooting
If you encounter any issues with your Barkan TV Wall Mount, consider the following:
- Mount is not level: Use the +/-5 degree leveling adjustment feature to correct the screen's horizontal alignment.
- Difficulty with movement: Ensure all locking mechanisms (if any) are disengaged. Check for any obstructions or overtightened screws that might restrict movement.
- Instructions unclear: While this manual aims to be comprehensive, if you find the assembly instructions difficult to follow, Barkan provides additional resources on their website, including video demonstrations and FAQs.
- TV connection screws: The included hardware kit contains screws compatible with 90% of popular TVs. If your screen requires different screws, please purchase them from a local hardware store or contact Barkan for assistance.
For further assistance, please refer to the Support section.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BM343LP |
| Screen Size Compatibility | 13 - 65 Inches |
| Maximum Load Capacity | 80 lbs (36 kg) |
| VESA Compatibility | 75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x300, 300x400, 400x200, 400x300, 400x400 mm (and non-VESA up to 400x400 mm) |
| Minimum Distance from Wall | 2.9 inches (7.5 cm) |
| Maximum Distance from Wall | 21 inches (53.5 cm) |
| Tilt Angle | -5° to +15° |
| Swivel Angle | 180° (near screen connection plate), 90° for TVs up to 50" |
| Leveling Adjustment | +/-5° |
| Material | Metal |
| Item Weight | 7.59 pounds |
| Color | Black |
Figure 10: Detailed Specifications Diagram
Warranty
The Barkan TV Wall Mount comes with a Lifetime Limited Warranty. This warranty covers defects in materials and workmanship under normal use. Barkan products undergo strict quality tests and are tested with 4 times their declared weight to ensure durability and safety.
For warranty claims or detailed terms and conditions, please contact Barkan customer support.
Support
Barkan is committed to providing excellent customer service. If you have any questions, require assistance with installation, or need to report an issue, please use the following contact methods:
- Email Support: sales.usa@barkanmounts.com
- Online Support: Visit the Barkan support page at https://www.barkanmounts.com/support. Here you can find FAQs, video demonstrations, and other helpful tools.
Our customer service experts are available to assist you.
