Product Overview
The iProtec Chameleon II Flashlight is a high-powered illumination device featuring four distinct LED lighting modes: 150 Lumen White, 65 Lumen Green, 15 Lumen Red, and 150 Lumen White Strobe. Constructed from durable aircraft-grade aluminum, this flashlight is designed for impact resistance up to 1 meter. It incorporates a 4x zoom function, a hands-free magnetic base, and a steel belt/pocket clip for enhanced portability and utility. Three AAA batteries are included for immediate operation.
Image: The iProtec Chameleon II Flashlight, showcasing its black aluminum body, lens, and the iProtec logo. The flashlight features red and green rings near the lens, indicating its multi-color LED capabilities. A belt clip is visible along the side.
Setup
Battery Installation
- Unscrew the tail cap of the flashlight by turning it counter-clockwise.
- Insert three (3) AAA batteries into the battery compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
- Screw the tail cap back on clockwise until securely tightened.
Note: The flashlight comes with 3 AAA batteries included. Always use fresh batteries for optimal performance.
Operating Instructions
Power On/Off and Mode Selection
The power button is located on the tail cap of the flashlight.
- To Turn On/Off: Press the power button completely until it clicks.
- To Cycle Modes: With the flashlight on, lightly press the power button (without clicking) to cycle through the four lighting modes:
- 150 Lumen White LED
- 65 Lumen Green LED
- 15 Lumen Red LED
- 150 Lumen White Strobe
Zoom Function
The iProtec Chameleon II features a 4x adjustable zoom. To adjust the beam focus:
- Grasp the head of the flashlight and slide it forward or backward to adjust the beam from a wide floodlight to a narrow spotlight.
- The zoom function is available in all lighting modes.
Magnetic Base and Clip
- Magnetic Base: The tail cap contains a powerful magnet, allowing the flashlight to be securely attached to metallic surfaces for hands-free operation.
- Steel Belt/Pocket Clip: Use the integrated steel clip to attach the flashlight to a belt, pocket, or gear for convenient carrying.
Maintenance
- Cleaning: Wipe the flashlight body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Battery Care: If the flashlight will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.
- Lubrication: Periodically apply a thin layer of silicone grease to the O-rings and threads to maintain water resistance and smooth operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on. |
|
|
| Light output is dim. | Low battery power. | Replace batteries with new ones. |
| Beam is inconsistent or flickers. |
|
|
Specifications
| Model Name | iProtec Chameleon II Flashlight |
| Light Source Type | LED |
| White Brightness | 150 Lumens |
| Green Brightness | 65 Lumens |
| Red Brightness | 15 Lumens |
| Power Source | Battery Powered |
| Battery Type | 3 x AAA Alkaline (Included) |
| Voltage | 4.5 Volts |
| Material | Aircraft Grade Aluminum |
| Color | Black |
| Special Features | Durable, LED Lighting, Lightweight, 4x Zoom, Magnetic Base, Steel Clip |
| Impact Resistance | 1 Meter |
| Item Package Dimensions | 8.25 x 4.4 x 1.5 inches |
| Package Weight | 0.2 Kilograms |
| UPC | 645397933779 |
Warranty and Support
Warranty Information
The iProtec Chameleon II Flashlight comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, warranty claims, or general inquiries, please refer to the manufacturer's official website or contact their customer service department. Specific contact details are typically provided with the product packaging or on the official iProtec website.