Product Overview
The Power Practical Sparkr Insert is a USB rechargeable dual arc electric lighter designed to replace the traditional fuel insert in most classic flip-top lighter cases. It provides a flameless, windproof ignition source, eliminating the need for lighter fluid or flint.
- Dual Plasma Arc Beams: Features X-patterned beams for reliable ignition in various weather conditions.
- Compatibility: Designed to fit most classic flip-top lighter cases. Note: Does not fit Zippo Slim or 1935 replica cases.
- USB Rechargeable: Equipped with a 250 mAh Li-Ion battery, recharging in approximately 1 hour via a micro USB port. Provides up to 100+ uses per charge.
- Clean Operation: Offers an alternative to traditional lighters, avoiding the mess, smell, and taste associated with kerosene, naphtha, or butane fuels.
Setup Instructions
1. Initial Charge
Before first use, fully charge the Sparkr Insert. Connect the included micro USB cable to the charging port on the bottom of the insert and plug the other end into a USB power source (e.g., computer, wall adapter). The indicator light will show charging status and turn off or change color when fully charged. A full charge typically takes about 1 hour.
Image: The Sparkr Insert connected to a micro USB cable for charging. A blue indicator light is visible, indicating the charging process.
2. Installation into Lighter Case
Remove the existing fuel insert from your classic flip-top lighter case. Slide the Sparkr Insert into the lighter case, ensuring it is seated firmly. The insert is designed to fit snugly. Once inserted, the safety button on the side of the insert will be engaged, allowing the plasma lighter to be ready for use when the lid is opened.
Image: A hand demonstrating the installation of the Sparkr Insert into a black classic flip-top lighter case. An arrow indicates the downward motion for insertion.
Video: An official product video demonstrating the installation and basic operation of the Sparkr Lighter Insert within a classic flip-top lighter case.
Operating Instructions
Activating the Plasma Arc
Once the Sparkr Insert is correctly installed in a compatible lighter case, open the lighter's lid. Press and hold the activation button located on the side of the insert. The dual plasma arc beams will generate between the electrodes. Release the button to deactivate the arc. The safety mechanism requires the insert to be within a lighter case for activation.
Image: A hand holding a classic flip-top lighter with the Sparkr Insert activated, showing the purple dual plasma arc beams.
Safety Precautions
- Keep away from children.
- Do not touch the plasma arcs directly.
- Do not expose to extreme temperatures or direct sunlight.
- Do not immerse in water or other liquids.
- Ensure the lighter is closed when not in use to prevent accidental activation.
Maintenance
Recharging
When the battery is low, the plasma arc may become weaker or fail to activate. To recharge, remove the Sparkr Insert from the lighter case and connect it to a USB power source using the provided micro USB cable. The charging indicator light will confirm it is charging. Recharge time is approximately 1 hour for a full charge, providing up to 100+ uses.
Cleaning
The Sparkr Insert requires minimal cleaning. If dust or debris accumulates around the electrodes, gently wipe with a dry, soft cloth. Do not use liquids or abrasive cleaners.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lighter does not activate. | Battery is low or depleted. | Recharge the Sparkr Insert fully. |
| Lighter does not activate. | Insert not properly seated in case, or safety button not engaged. | Ensure the insert is fully pushed into the lighter case. The safety mechanism prevents activation outside the case. |
| Lighter does not activate. | Electrodes are dirty or obstructed. | Gently clean the electrodes with a dry, soft cloth. |
| Arc is weak or inconsistent. | Low battery charge. | Recharge the Sparkr Insert. |
| Insert does not fit classic flip-top case. | Incompatible lighter case model. | The Sparkr Insert is designed for most standard classic flip-top cases. It is not compatible with Zippo Slim or 1935 replica cases. Verify your lighter case model. |
Specifications
- Model: B083ZMC89W
- Brand: Power Practical
- Dimensions: 2"L x 1.4"W x 0.5"Th (5.08 cm L x 3.56 cm W x 1.27 cm Th)
- Weight: 0.1 kg (approximately 3.5 oz)
- Battery: 250 mAh Li-Ion
- Charging Port: Micro USB (5V, 0.3A)
- Recharge Time: Approximately 1 hour
- Uses per Charge: Up to 100+
- Material: Metal
- Fuel Type: Electric (Plasma Arc)
Warranty Information
Power Practical products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the documentation included with your purchase or contact Power Practical customer support directly. Keep your proof of purchase for warranty claims.
Customer Support
For any questions, concerns, or assistance with your Sparkr Insert Dual Arc Electric Lighter, please contact Power Practical customer support. We are committed to providing high-quality products and support. You can typically expect a response within 24 hours.
Contact Information: Please refer to the contact details provided in your product packaging or visit the official Power Practical website for the most current support information.