1. Product Overview
The Lexon Flip+ Travel Digital Alarm Clock is a compact and portable alarm clock designed for ease of use and travel. Its unique reversible ON/OFF feature allows you to activate or deactivate the alarm simply by flipping the device. It features an electroluminescent LCD display, a touch sensor for light and snooze, and operates on AAA batteries.
Figure 1: Front view of the Lexon Flip+ Travel Digital Alarm Clock, showing the time 12:30 and alarm set for 08:00.
Key Features:
- Reversible ON/OFF Function: Activate or deactivate the alarm by simply flipping the clock.
- Electroluminescent LCD Display: Clear and easy-to-read display, even in low light conditions.
- Touch Sensor: For activating the display light and snooze function.
- Compact and Portable: Ideal for travel, measuring approximately 3.3 x 2 x 0.9 inches.
- Battery Operated: Runs on 2 AAA batteries (included).
- Durable Rubber Finish: Provides a non-slip grip and enhanced durability.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the underside of the clock.
- Open the battery compartment cover.
- Insert 2 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
Figure 2: Rear view of the clock, indicating the battery compartment and control buttons.
2.2 Setting Time and Alarm
The control buttons for setting the time and alarm are located on the rear of the clock, next to the battery compartment.
- Press the SET button to enter time setting mode. The hour digits will flash.
- Use the + and - buttons to adjust the hour.
- Press SET again to confirm the hour and move to minute setting. The minute digits will flash.
- Use the + and - buttons to adjust the minutes.
- Press SET again to confirm the minutes and exit time setting mode.
- To set the alarm, press and hold the SET button until the alarm time digits flash.
- Use the + and - buttons to adjust the alarm hour and minutes, pressing SET to confirm each.
- Press SET one last time to save the alarm setting.
3. Operating Instructions
3.1 Activating and Deactivating the Alarm
The Lexon Flip+ features a unique reversible design for alarm control:
- To activate the alarm, place the clock with the side marked "ON" facing upwards. The alarm icon will appear on the display.
- To deactivate the alarm, flip the clock so the side marked "OFF" is facing upwards. The alarm icon will disappear from the display.
Figure 3: Demonstrating the flip mechanism to turn the alarm ON or OFF.
3.2 Display Light and Snooze Function
- To illuminate the display, gently touch the top surface of the clock. The electroluminescent backlight will activate for a few seconds.
- When the alarm sounds, touch the top surface of the clock to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (standard snooze duration).
- To completely turn off the alarm after it sounds, flip the clock to the "OFF" side.
Figure 4: The clock's display features, including electroluminescent LCD and touch sensor.
3.3 Product Demonstration Video
Video 1: An official demonstration of the Lexon Flip+ family of alarm clocks, showcasing their design and key functionalities, including the reversible ON/OFF feature and display illumination.
4. Maintenance
4.1 Cleaning
To clean the clock, gently wipe its surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or display.
4.2 Battery Replacement
When the display dims or the clock functions become erratic, it is time to replace the batteries. Follow the battery installation steps in Section 2.1.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is dim or blank. | Low or depleted batteries. | Replace the 2 AAA batteries. |
| Alarm does not sound. | Clock is in "OFF" position. Alarm time not set. | Ensure the "ON" side is facing up. Verify the alarm time is correctly set. |
| Alarm stops after a short period (e.g., 2 minutes). | This is a design feature of the alarm. | The alarm is designed to sound for approximately 2 minutes and then turn off automatically if not manually deactivated or snoozed. This is normal operation. |
| Time or alarm setting is difficult. | Unfamiliarity with controls. | Refer to Section 2.2 for detailed instructions on setting time and alarm. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Lexon |
| Model Number | 0500-00001-GB |
| Display Type | LCD |
| Power Source | 2 AAA batteries (included) |
| Product Dimensions | 3.31"W x 0.94"H (approx. 8.4 cm x 2.4 cm) |
| Item Weight | 2.24 ounces (approx. 63.5 grams) |
| Frame Material | Rubber |
| Special Feature | Cordless, Reversible ON/OFF, Touch Sensor Light/Snooze |
7. Warranty and Support
For detailed warranty information and customer support, please refer to the official Lexon website or contact your retailer.
An official user manual in PDF format is available for download: Download User Manual (PDF).
