Introduction
This manual provides essential instructions for the setup, operation, and maintenance of your Lexon Flip+ Travel Digital Alarm Clock. Please read this manual thoroughly before using the device to ensure proper function and longevity.
Product Overview
The Lexon Flip+ is a compact and portable digital alarm clock designed for travel and everyday use. Its unique reversible design allows for easy alarm activation and deactivation by simply flipping the device. It features an electroluminescent LCD display, a touch sensor for snooze and light, and operates on AAA batteries.
Image: The Lexon Flip+ Travel Digital Alarm Clock in dark grey, showing the digital time and set alarm time on its illuminated LCD display.
Package Contents
- 1 x Lexon Flip+ Travel Digital Alarm Clock
- 2 x AAA Batteries
- 1 x User Manual (this document)
Image: The retail packaging for the Lexon Flip+ Travel Digital Alarm Clock, showing the clock and branding.
Setup
1. Battery Installation
- Locate the battery compartment on the underside of the clock.
- Open the battery compartment cover.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
2. Setting the Time
- Turn the clock over to reveal the control buttons on the back.
- Press and hold the "SET" button until the hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the hour.
- Press "SET" again to move to the minute digits, then use "+" and "-" to adjust.
- Press "SET" a third time to confirm the time setting.
3. Setting the Alarm
- With the clock displaying the current time, press the "ALARM" button (often combined with SET or a dedicated button).
- The alarm hour digits will flash. Use the "+" and "-" buttons to set the desired alarm hour.
- Press "ALARM" again to move to the alarm minute digits, then use "+" and "-" to adjust.
- Press "ALARM" a third time to confirm the alarm setting.
Image: The rear view of the Lexon Flip+ clock, highlighting the "SET" button and time adjustment controls for initial setup.
Operating Instructions
Activating/Deactivating the Alarm
The Lexon Flip+ features a unique reversible design for alarm control:
- To activate the alarm, place the clock with the side marked "ON" facing upwards. The alarm icon will appear on the display.
- To deactivate the alarm, flip the clock so the side marked "OFF" is facing upwards. The alarm icon will disappear from the display.
Image: A visual representation of the Lexon Flip+ clock being turned over to switch the alarm between "ON" and "OFF" states, with a person sleeping in the background.
Snooze Function
When the alarm sounds, gently touch the top surface of the clock. This will activate the snooze function, pausing the alarm for a short period (typically 5 minutes). The alarm will sound again after the snooze period ends.
Display Light
To illuminate the display for a few seconds, gently touch the top surface of the clock. This is useful for checking the time in low-light conditions without activating snooze if the alarm is not currently sounding.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the display dims or the clock functions become erratic. Always use new AAA batteries.
- Storage: If storing the clock for an extended period, remove the batteries to prevent leakage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead batteries. | Replace with new AAA batteries. |
| Alarm does not sound. | Alarm is deactivated ("OFF" side up). Alarm time not set correctly. | Flip the clock to the "ON" side. Verify alarm time settings. |
| Time is incorrect. | Time not set or batteries recently replaced. | Reset the current time as per "Setting the Time" instructions. |
| Snooze/Light function unresponsive. | Low batteries. Improper touch. | Replace batteries. Ensure a firm, flat touch on the top surface. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LR151G3-2 |
| Display Type | LCD with Electroluminescent Backlight |
| Power Source | 2 x AAA Batteries (included) |
| Dimensions (L x W x H) | 3.3" x 2.05" x 0.94" (approx. 8.4 cm x 5.2 cm x 2.4 cm) |
| Weight | 80 grams (2.82 ounces) |
| Material | Rubber casing |
| Special Features | Reversible ON/OFF alarm, Touch sensor for snooze/light |
Image: The Lexon Flip+ clock shown with its compact dimensions: 3.3 inches length, 2.05 inches width, and 0.94 inches height. The product specifications list the weight as 80 grams.
Warranty and Support
For warranty information and customer support, please refer to the official Lexon website or contact your retailer. Keep your proof of purchase for warranty claims.
Manufacturer: Lexon
UPC: 810011112476
