1. Introduction
This manual provides essential information for the proper use, fitting, and maintenance of your T'nB Urban Moov Protective Helmet. Designed for activities such as scootering, cycling, and skateboarding, this helmet offers protection against impacts and bumps. Please read these instructions carefully before use to ensure maximum safety and product longevity.
2. Safety Information
Your safety is paramount. This helmet is designed to reduce the risk of head injury during falls or impacts. It complies with safety standards EN 1078:2012 + A1:2012.
- Always wear your helmet correctly fitted and securely fastened.
- A helmet cannot protect against all possible injuries.
- Inspect the helmet for any damage before each use. Do not use a damaged helmet.
- After a significant impact, even if no visible damage is apparent, the helmet should be replaced. Its protective capacity may be compromised.
- Avoid exposing the helmet to extreme temperatures or corrosive substances, as this may degrade its materials.
3. Product Components
The T'nB Urban Moov Protective Helmet package includes:
- 1 x T'nB Urban Moov Protective Helmet (Size L)
- 1 x Instruction Manual
4. Fitting and Adjustment
Proper fit is crucial for the helmet's effectiveness. Follow these steps to ensure a secure and comfortable fit:
- Placement: Place the helmet squarely on your head, ensuring it covers your forehead. The front edge should be approximately two finger-widths above your eyebrows.
- Rear Adjustment System: The helmet features a rear adjustment system. Turn the dial located at the back of the helmet clockwise to tighten and counter-clockwise to loosen. Adjust until the helmet feels snug and does not move freely when you shake your head.
- Chin Strap Adjustment: Fasten the chin strap buckle. Adjust the strap tension so that it is snug under your chin, but not uncomfortably tight. You should be able to fit one or two fingers between the strap and your chin.
- Side Straps: Adjust the side straps so that they form a 'V' shape just below your ears. Ensure the straps do not cover your ears.
- Final Check: Once adjusted, try to move the helmet from side to side and front to back. It should not shift significantly. Open your mouth wide; the helmet should press down slightly on your head. If it does not, tighten the chin strap.
Image 1: Front view of the T'nB Urban Moov helmet, black, showing the ventilation holes and the 'Urban Moov' logo in light blue. This view highlights the overall shape and front ventilation.
Image 2: Rear view of the T'nB Urban Moov helmet, black, showing the adjustable retention system with a dial and the rear ventilation holes. This image illustrates the mechanism for securing the helmet to the head.
5. Usage Guidelines
This helmet is intended for use during recreational activities such as:
- Cycling
- Scootering
- Skateboarding
- Inline Skating
Always ensure the helmet is properly fitted and secured before engaging in any activity. The 11 air vents provide improved ventilation to prevent excessive perspiration during use.
Image 3: Side view of the T'nB Urban Moov helmet, black, featuring a light blue geometric logo on the side and the 'Urban Moov' text near the base. This view shows the side profile and branding.
6. Care and Maintenance
To maintain your helmet's condition and protective capabilities:
- Cleaning: Clean the helmet with a soft cloth, mild soap, and water only. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's materials and compromise its integrity.
- Storage: Store the helmet in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store it near heat sources.
- Inspection: Regularly inspect the helmet for any signs of wear, cracks, dents, or strap damage. If any damage is found, replace the helmet immediately.
7. Troubleshooting
If you encounter issues with your helmet, consider the following:
- Helmet feels loose: Re-adjust the rear adjustment system and chin strap as described in Section 4. Ensure all straps are snug.
- Helmet is uncomfortable: Check if the helmet is positioned correctly on your head. Ensure no straps are twisted or pinching. Adjust the fit gradually until comfortable.
- Excessive perspiration: The helmet features 11 air vents for ventilation. Ensure your activity level is appropriate for the conditions.
If problems persist or you suspect the helmet's integrity is compromised, discontinue use and contact customer support.
8. Specifications
| Model Number | UMHELMETL |
| Brand | T'nB |
| Color | Black |
| Size | Large (Head circumference: 58-60 cm) |
| Age Range | Adult |
| Main Material | ABS (Acrylonitrile Butadiene Styrene) / EPS |
| Special Features | Ventilation (11 air vents), Adjustable Fit System |
| Product Dimensions (L x W x H) | 22 x 22 x 15 cm |
| Product Weight | 464 grams |
| Safety Standard | EN 1078:2012 + A1:2012 |
9. Warranty Information
For warranty details, please refer to the specific terms and conditions provided at the point of purchase or contact T'nB customer service. Generally, products are covered against manufacturing defects for a limited period from the date of purchase.
10. Customer Support
If you have any questions, require assistance, or need to report an issue with your T'nB Urban Moov Protective Helmet, please contact your retailer or visit the official T'nB website for support contact information.
