Highwild 55 Gallon Deer Feeder Barrel Band Leg Mounting Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly and use of your Highwild 55 Gallon Deer Feeder Barrel Band Leg Mounting Kit. This kit is designed to allow you to securely mount feeder legs to a standard 55-gallon barrel without the need for drilling holes in the barrel itself, offering a convenient solution for building your own deer feeder system.

2. Package Contents

Please ensure all components are present before beginning assembly:

• Barrel Band (Adjustable)
• Mounting Hardware (bolts, nuts, washers)
• Assembly Instructions (this manual)
• Note: Pipe legs for the feeder are NOT INCLUDED and should be sourced separately. It is recommended to use pipes with an inner diameter of 1 1/4 inches or larger.

Figure 1: Included Components Diagram

This image displays the various parts included in the Highwild Deer Feeder Barrel Band Leg Mounting Kit. It shows the main barrel band components, along with the necessary bolts, nuts, and washers for assembly. This visual aid helps confirm that all required pieces are present before starting the installation process.

3. Setup and Installation

Follow these steps to assemble and install the barrel band leg mounting kit onto your 55-gallon barrel. Installation is designed to be quick and straightforward.

3.1. Assembling the Barrel Band

1. Unpack all components and verify against the parts list (Figure 1).
2. Position the barrel band sections around the base of your 55-gallon barrel. The band is designed to fit snugly without requiring modifications to the barrel.
3. Align the pre-drilled holes on the barrel band sections. Insert the provided long bolts through these holes.
4. Secure the bolts with the corresponding nuts and washers. The long bolts allow for adjustment to ensure a tight fit around barrels of slightly varying sizes. Tighten securely but do not overtighten initially.
5. Once the band is loosely assembled around the barrel, ensure it is level and at the desired height for your feeder legs. Then, fully tighten all bolts to firmly secure the band to the barrel.

Figure 2: Barrel Band Placement

This image illustrates how the barrel band is positioned around the lower section of a 55-gallon barrel. The transparent outline of the barrel above the band indicates the intended placement, showing that the band provides a stable base for attaching feeder legs without altering the barrel itself.

Figure 3: Adjustable Bolt Mechanism

A detailed view of the adjustable bolts on the barrel band. This image highlights the mechanism that allows the band to be expanded or contracted to fit various 55-gallon barrel diameters, ensuring a secure and customized fit for your feeder setup.

3.2. Attaching Feeder Legs

The barrel band includes mounting points for attaching your chosen feeder legs. Ensure your feeder legs are compatible with the mounting points and are made from pipe with an inner diameter of 1 1/4 inches or larger for optimal stability.

1. Insert your feeder legs into the designated slots on the barrel band.
2. Secure the legs using appropriate fasteners (not included with this kit, typically provided with the feeder legs themselves) to prevent movement.

3.3. Visual Installation Guide

For a visual demonstration of the installation process, please refer to the official Highwild installation video:

4. Operating Guidelines

Once the Highwild Barrel Band Leg Mounting Kit is installed and your feeder is assembled, consider the following operational guidelines:

• Feeder Placement: Position your feeder in a suitable location, taking into account local regulations and wildlife patterns.
• Feeder Security: Secure the entire feeder assembly to prevent access by larger animals or accidental tipping. This may involve anchoring the legs to the ground.
• Feed Type: Use appropriate feed types for the target species. Avoid food types that may be harmful to certain animals or attract unwanted pests.
• Monitoring: Regularly monitor the feeder for proper operation, feed levels, and any signs of damage or animal interference.

5. Maintenance

To ensure the longevity and optimal performance of your Highwild Barrel Band Leg Mounting Kit, periodic maintenance is recommended:

• Inspect Fasteners: Periodically check all bolts, nuts, and connections for tightness. Tighten any loose fasteners to maintain stability.
• Clean Components: Clean the barrel band and mounting points as needed to remove dirt, debris, or feed residue. A damp cloth is usually sufficient.
• Check for Damage: Inspect the metal components for any signs of rust, corrosion, bends, or cracks. Address any damage promptly to prevent further deterioration.
• Storage: If disassembling for off-season storage, clean all parts thoroughly and store them in a dry environment to prevent rust and extend product life.

6. Troubleshooting

This section addresses common issues you might encounter with the Highwild Barrel Band Leg Mounting Kit:

• Loose Fit on Barrel: If the barrel band feels loose, ensure all adjustable bolts are fully tightened. The design allows for a snug fit on standard 55-gallon barrels.
• Unstable Feeder: Verify that the feeder legs are correctly installed into the barrel band's mounting points and are securely fastened. Ensure the ground beneath the feeder is level and stable. Consider anchoring the feeder legs if instability persists.
• Missing Parts: If any parts were missing upon arrival, please contact Highwild customer support immediately for assistance.

For issues not covered here, please refer to the support information provided in Section 8.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or to inquire about replacement parts, please contact Highwild customer service. Refer to the product packaging or the official Highwild website for the most current contact details.

Online Support: Visit the Highwild Store on Amazon for product information and support resources.