Edison Centrifugal Juicer Instruction Manual

Introduction

Thank you for choosing the Edison Centrifugal Juicer. This appliance is designed to efficiently extract juice from various fruits and vegetables, providing fresh and nutritious beverages. Constructed from high-quality stainless steel, it offers durability and ease of cleaning. Please read this manual thoroughly before first use to ensure safe and optimal operation.

Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

• Read all instructions before use.
• Do not immerse the motor base in water or other liquids.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter or touch hot surfaces.
• Always ensure the juicer cover is properly secured before the motor is switched on.
• Do not put fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in the opening, use a food pusher to push it down.
• Do not use the appliance for anything other than its intended use.
• Close supervision is necessary when any appliance is used by or near children.

Product Overview

Image: Edison Centrifugal Juicer, showcasing its stainless steel body, black accents, and the included 1-liter juice jug. The control knob for speed settings is visible on the front.

The Edison Centrifugal Juicer consists of several key components:

• Food Pusher: Used to guide fruits and vegetables into the feeding chute.
• Feeding Chute: The opening where produce is inserted.
• Cover: Transparent cover that secures the juicing components.
• Filter Basket / Blade Assembly: Stainless steel filter and cutting blade for extracting juice.
• Juice Spout: Where the extracted juice flows out.
• Pulp Container: Collects the discarded pulp.
• Motor Base: Contains the motor and control knob.
• Juice Jug: A 1-liter capacity jug for collecting fresh juice.
• Locking Bar: Secures the cover to the motor base.

Setup

1. Before first use, wash all removable parts (cover, filter basket, pulp container, juice jug, food pusher) in warm, soapy water. Rinse thoroughly and dry. The parts are dishwasher safe.
2. Place the motor base on a stable, flat, and dry surface.
3. Insert the pulp container into its designated position on the motor base.
4. Place the filter basket securely onto the motor base, ensuring it clicks into place.
5. Position the cover over the filter basket and motor base, aligning the juice spout with the opening.
6. Engage the locking bar by lifting it and securing it into the grooves on the cover. Ensure it is firmly locked before operation.
7. Place the 1-liter juice jug under the juice spout.
8. Plug the power cord into a suitable electrical outlet.

Operating Instructions

Preparation:

• Wash all fruits and vegetables thoroughly.
• For larger items, cut them into smaller pieces that fit the feeding chute.
• Remove pits from fruits like peaches, cherries, etc.
• Remove hard seeds from fruits like melons.
• Peel citrus fruits, pineapples, and other fruits with thick or inedible skins.

Juicing:

1. Ensure the juicer is correctly assembled and the juice jug is in place.
2. Turn the control knob to the desired speed setting. The juicer has 2 speed settings and an 'Off' (0) position.
   • Speed 1: For softer fruits and vegetables (e.g., oranges, grapes, tomatoes).
   • Speed 2: For harder fruits and vegetables (e.g., carrots, apples, celery).
3. With the motor running, gradually feed the prepared fruits or vegetables into the feeding chute. Use the food pusher to gently guide them down. Do not force the food.
4. The fresh juice will flow into the juice jug, and the pulp will collect in the pulp container.
5. When finished juicing, turn the control knob to the '0' (Off) position and unplug the appliance.

Note: The juicer operates with an 800-watt motor, providing efficient juicing performance.

Maintenance and Cleaning

Regular cleaning ensures the longevity and hygiene of your juicer. Always unplug the appliance before cleaning.

1. Turn the control knob to '0' (Off) and unplug the juicer from the power outlet.
2. Disassemble the juicer by releasing the locking bar, removing the cover, filter basket, pulp container, and food pusher.
3. Empty the pulp container.
4. Rinse all removable parts under running water immediately after use to prevent pulp from drying and sticking.
5. All removable parts are dishwasher safe. Alternatively, wash them in warm, soapy water using a brush for the filter basket to remove any stubborn pulp.
6. Wipe the motor base with a damp cloth. Never immerse the motor base in water or any other liquid.
7. Dry all parts thoroughly before reassembling or storing.
8. Store the juicer in a clean, dry place.

Troubleshooting

Specifications

• Brand: Edison
• Model Number: 6285360296001
• Color: Black
• Material: Stainless Steel
• Power: 800 Watts
• Speed Settings: 2
• Juice Jug Capacity: 1 Liter
• Item Weight: 2.59 Kilograms (5.71 Pounds)
• Shipping Dimensions: 13.54 x 10.63 x 7.17 cm
• Power Source: Corded Electric
• Care Instructions: Dishwasher Safe (removable parts)
• First Available Date: January 15, 2020
• ASIN: B083XG535N

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or contact Edison customer service. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may visit the official Edison website or contact their authorized service centers.