Introduction
The mooas Multi Clock Time Cube Timer is a versatile device designed for effective time management and productivity. It combines the functionality of a digital clock with a cube-style timer, offering pre-set time intervals for various activities. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal use of your device.

Image: The mooas Multi Clock Time Cube Timer in Neon Coral, showing the current time.
Key Features
- Pre-set Time Intervals: Available with 10, 30, 50, and 60 minutes (specific intervals may vary by color variant).
- Dual Functionality: Operates as both a digital clock and a timer for convenience.
- Time Display Modes: Clock mode supports 12-hour and 24-hour formats.
- Intuitive Operation: Simply flip the cube to activate desired timer settings.
- LED Indicator: Blinks each second to visually show elapsed time without needing to view the display.
- Alarm & Backlight: Features an audible alarm and backlight that activates when the timer concludes, lasting for 1 minute and 10 seconds respectively.
- Compact & Portable Design: Lightweight cube design, suitable for various environments.
Setup
Battery Installation
The mooas Multi Clock Time Cube Timer requires 2 AAA batteries (not included). To install the batteries:
- Locate the battery compartment on the back of the device.
- Gently slide open the battery cover.
- Insert two AAA batteries, ensuring correct polarity (+ and -).
- Close the battery cover securely.

Image: Battery compartment on the back of the timer.
Operating Instructions
Switching Between Clock and Timer Modes
On the back of the device, there is a toggle switch labeled 'CLOCK' and 'TIMER'. Slide this switch to select your desired mode.
Setting the Clock
In Clock mode:
- Ensure the toggle switch on the back is set to 'CLOCK'.
- Press the 'SET' button to enter time setting mode.
- Use the 'UP' button to adjust the hour. Press 'SET' again to move to minute adjustment.
- Use the 'UP' button to adjust the minute. Press 'SET' again to confirm.
- To switch between 12-hour and 24-hour display, press the 'UP' button while the hour is flashing during setup.

Image: The timer displaying time in clock mode.

Image: The timer's backlight illuminates the display for visibility.
Using the Timer
In Timer mode:
- Ensure the toggle switch on the back is set to 'TIMER'.
- To start a pre-set timer, simply flip the cube so that the side with the desired time (e.g., 10 min, 30 min, 50 min, 60 min) is facing upwards. The timer will start automatically with a beep.
- The LED indicator on each side will blink every second, showing the progress of the timer.

Image: Setting the timer by flipping the cube to the desired time interval.

Image: The timer actively counting down.
Pause and Resume Timer
- To pause the timer, turn the cube so that the side with the LCD display is facing upwards. The timer will temporarily stop.
- To resume the timer, turn the cube so that the side with the number (the active timer interval) faces upwards again. The countdown will continue from where it left off.
Resetting the Timer
- To reset the timer to its initial pre-set value, turn the cube so that the LCD display faces downwards. Then, flip it back to the desired time interval.
Alarm and Backlight
- When the timer reaches zero, the backlight will turn on and the alarm will begin to ring.
- The backlight remains active for 10 seconds, and the alarm sounds for 1 minute.
Official Product Video
Video: Official overview of the mooas Multi Cube Timer, demonstrating its features and ease of use.
Product Overview
The mooas Multi Clock Time Cube Timer is designed to seamlessly integrate into various settings, from kitchens to study desks, aiding in diverse time management needs.

Image: Multiple timers in a kitchen setting.

Image: Multiple timers in an office or study environment.

Image: Timers displayed in a home setting.
Maintenance
- Clean the device with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Do not expose the device to extreme temperatures, direct sunlight, or moisture.
- If the device will not be used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
- Device not turning on: Ensure batteries are correctly inserted with proper polarity and are not depleted. Replace with new AAA batteries if necessary.
- Timer not starting: Verify the toggle switch is set to 'TIMER' mode and that the desired time interval side is facing completely upwards.
- Display issues: If the display is dim or flickering, replace the batteries.
Specifications
| Attribute | Detail |
|---|---|
| Brand | mooas |
| Model Number | MT-C2 |
| Color | Neon Coral |
| Material | Plastic |
| Product Dimensions | 2.36"D x 2.36"W x 2.17"H |
| Item Weight | 69 Grams (2.43 ounces) |
| Number of Settings | 4 (Pre-set times: 10, 30, 50, 60 minutes) |
| Screen Size | 1 Inches |
| Batteries Required | Yes (2 AAA batteries, not included) |

Image: Product dimensions.
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact mooas customer service directly. Contact details can typically be found on the manufacturer's official website or through your point of purchase.





