LUVERNE 481037-571633 Polished Stainless Steel Side Entry Steps User Manual

1. Product Overview

The LUVERNE Side Entry Steps are designed to provide a secure and convenient stepping surface for your truck. Constructed from polished stainless steel, these running boards offer durability and resistance to corrosion, ensuring long-lasting performance. The design integrates a 5-1/2 inch wide non-skid stepping surface for safe entry and exit from your vehicle. These steps are engineered for a custom-fit installation on specific Ram 1500 Crew Cab models.

Image 1: LUVERNE Polished Stainless Steel Side Entry Steps, showing the polished finish and black step pads.

2. Safety Information

• Always ensure all mounting hardware is securely fastened before and after installation.
• Regularly inspect the steps and mounting brackets for any signs of wear, damage, or loose connections.
• Do not exceed the maximum weight capacity of the steps (consult vehicle manufacturer for specific limits if available, or use common sense for stepping).
• Exercise caution when stepping on or off the running boards, especially in wet or icy conditions.
• Keep hands and feet clear of moving parts during installation and operation.

3. Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact LUVERNE customer support.

• LUVERNE Side Entry Steps (Left and Right)
• Vehicle-specific Mounting Brackets (shipped separately)
• Installation Hardware Kit (bolts, washers, nuts, etc.)

4. Setup and Installation

Installation of the LUVERNE Side Entry Steps requires basic mechanical skills and common hand tools. It is recommended to have a second person assist during certain steps. Refer to the detailed installation instructions provided with your specific mounting bracket kit for precise, vehicle-specific guidance.

4.1. Required Tools (Typical)

• Socket Wrench Set
• Open-End Wrench Set
• Torque Wrench
• Measuring Tape
• Safety Glasses

4.2. General Installation Steps

1. Review Instructions: Carefully read all instructions and diagrams included with your mounting bracket kit before starting.
2. Prepare Vehicle: Park the vehicle on a level surface and engage the parking brake. For safety, consider disconnecting the vehicle's battery.
3. Identify Mounting Points: Locate the factory mounting points on the vehicle's frame or rocker panel as indicated in the bracket instructions.
4. Install Brackets: Attach the vehicle-specific mounting brackets to the designated points using the provided hardware. Do not fully tighten hardware at this stage.
5. Attach Steps: Carefully position the side entry steps onto the installed brackets. Secure the steps to the brackets using the appropriate hardware.
6. Adjust and Align: Adjust the steps for proper alignment and desired positioning relative to the vehicle. Ensure even spacing and levelness.
7. Tighten Hardware: Once satisfied with the alignment, progressively tighten all mounting hardware to the torque specifications provided in the bracket instructions.
8. Final Inspection: Perform a thorough inspection to ensure all components are securely fastened and the steps are stable.

Note: Components for the side steps and mounting brackets may ship separately. Ensure you have received all packages before beginning installation.

5. Operating Instructions

The LUVERNE Side Entry Steps are designed for straightforward use:

• Stepping On: Place your foot firmly on the non-skid step pad when entering the vehicle. Use the vehicle's grab handles for additional support if available.
• Stepping Off: When exiting, place your foot on the step pad and maintain balance. Avoid jumping off the steps.
• Weight Distribution: Distribute your weight evenly on the step pad. Avoid placing excessive weight on the edges of the steps.

6. Maintenance

Regular maintenance will help preserve the appearance and functionality of your LUVERNE Side Entry Steps.

6.1. Cleaning

• Clean the polished stainless steel surfaces with a mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
• The black polypropylene step pads can be cleaned with soap and water.

6.2. Inspection

• Periodically inspect all mounting hardware for tightness. Re-torque bolts to specifications if necessary.
• Check the steps and brackets for any signs of corrosion, cracks, or damage. Address any issues promptly to prevent further deterioration.
• Ensure the non-skid step pads are intact and securely attached.

7. Troubleshooting

If you encounter issues with your LUVERNE Side Entry Steps, consider the following:

• Steps Feel Loose: Check all mounting hardware. Re-tighten bolts to the recommended torque specifications. Ensure brackets are correctly installed.
• Unusual Noises: Inspect for any loose components or contact points between the steps, brackets, and vehicle. Tighten or adjust as needed.
• Corrosion Appears: While stainless steel is corrosion-resistant, environmental factors can sometimes cause surface discoloration. Clean thoroughly as per maintenance instructions. If severe, contact customer support.
• Difficulty Stepping: Ensure the step pads are clean and free of debris. Verify the steps are level and securely mounted.

For persistent issues, contact LUVERNE customer support.

8. Specifications

9. Warranty and Support

LUVERNE products are manufactured to high standards. For specific warranty information regarding your Side Entry Steps, please refer to the documentation included with your purchase or visit the official LUVERNE website.

For customer support, technical assistance, or to inquire about replacement parts, please visit the LUVERNE Store on Amazon or contact LUVERNE directly.

10. Legal Disclaimer

The information provided in this manual is for general informational purposes only. While we strive to provide accurate and up-to-date information, LUVERNE assumes no responsibility for errors or omissions in the contents of this manual. Users are responsible for ensuring proper installation and safe operation of the product. Always adhere to local laws and regulations.