Transformers Studio Series 67 Voyager Class Constructicon Skipjack Action Figure Instruction Manual

1. Introduction

This instruction manual provides comprehensive guidance for the Transformers Studio Series 67 Voyager Class Constructicon Skipjack Action Figure. This figure is inspired by the iconic movie scenes from Transformers: Revenge of the Fallen and is designed with specific details to reflect the Transformers movie universe. The Constructicon Skipjack converts between robot and bulldozer modes and is a component of the larger Devastator combiner.

Please read these instructions carefully to ensure proper handling, transformation, and enjoyment of your action figure.

2. Safety Information

Warning: Choking Hazard – Small parts. Not for children under 3 years.

This product is recommended for ages 8 years and up. Adult supervision is advised for younger users during initial transformations.

3. What's in the Box

• Transformers Studio Series Voyager Class Transformers: Revenge of the Fallen Constructicon Skipjack figure
• Removable backdrop
• Instructions

4. Setup and Assembly

The Constructicon Skipjack figure comes pre-assembled in one of its modes. To begin, carefully remove the figure and the removable backdrop from the packaging. The backdrop can be used to display the figure in a scene inspired by the Pyramid Desert Battle.

No additional assembly is required beyond the transformation process described in the Operating Instructions section.

5. Operating Instructions: Transformation

The Constructicon Skipjack figure features classic conversion between its robot and bulldozer modes in 22 steps. Refer to the included printed instructions for detailed, step-by-step visual guidance on transformation.

Key Transformation Points:

• Robot Mode: The figure is highly articulated for various poses, reflecting its appearance in the movie.
• Bulldozer Mode: A detailed vehicle mode, accurately representing a bulldozer.
• Combiner Component: Constructicon Skipjack is designed to combine with other Constructicon figures to form the larger Devastator combiner. In this combined form, Skipjack typically forms the left foot of Devastator.

Always apply gentle, firm pressure during transformation. Avoid forcing parts, as this may cause damage.

6. Maintenance

To ensure the longevity and appearance of your Constructicon Skipjack figure, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to gently wipe away dust and debris. Avoid using harsh chemicals or abrasive materials, which can damage the paint or plastic.
• Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures. Prolonged exposure to heat or cold can affect the plastic's integrity.
• Handling: Handle the figure with care, especially during transformation, to prevent accidental breakage of small parts or joints.

7. Troubleshooting

If you encounter any issues with your Constructicon Skipjack figure, consider the following:

• Stiff Joints: If a joint feels stiff, try wiggling it gently or applying a small amount of silicone-based lubricant (avoid oil-based lubricants).
• Transformation Difficulties: Re-examine the included instruction manual for the specific step causing difficulty. Ensure all parts are aligned correctly before attempting to move them.
• Loose Parts: If a part becomes loose, it may be designed to detach for transformation or combination. If it appears to be a defect, refer to the Warranty and Support section.

8. Specifications

9. Product Images

10. Product Videos

11. Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact the manufacturer, Hasbro, directly through their official customer service channels. Keep your proof of purchase for any warranty claims.