Lepro 330030-4

Lepro LED Camping Lantern User Manual

Model: 330030-4

Brand: Lepro

Introduction

The Lepro LED Camping Lantern is a versatile and portable lighting solution designed for various outdoor and emergency situations. This 4-pack of collapsible tent light bulbs offers three distinct lighting modes, a compact and lightweight design, and a convenient clip hook for easy hanging. Powered by AAA batteries, these lanterns are ideal for camping, hiking, hurricane preparedness, power outages, and general outdoor activities.

Four Lepro LED Camping Lanterns in blue and orange, with AAA batteries laid out below them.

Figure 1: Lepro LED Camping Lantern 4-pack with included batteries.

Setup Guide

Battery Installation

Your Lepro LED Camping Lanterns come with 12 AAA batteries (3 per lantern). Follow these steps to install the batteries:

  1. Locate the battery cover at the bottom of the lantern, near the clip hook.
  2. Twist the battery cover counter-clockwise to unlock and remove it.
  3. Insert three (3) AAA batteries into the battery holder, ensuring correct polarity (+ and - ends match the indicators inside the compartment).
  4. Replace the battery cover and twist it clockwise to securely lock it in place.
Diagram showing how to open the battery compartment and insert AAA batteries into the Lepro LED Camping Lantern.

Figure 2: Battery installation diagram.

Operating Instructions

Powering On/Off and Switching Modes

Each lantern features a single button for easy operation. Press the button to cycle through the lighting modes:

  • First Press: Activates Low Beam (6000K Daylight White). Provides 80 lumens and lasts approximately 10 hours.
  • Second Press: Switches to Low Beam (3000K Soft White). Provides 80 lumens and lasts approximately 10 hours.
  • Third Press: Switches to High Beam (5000K Cool White). Provides 140 lumens (equivalent to 15W incandescent) and lasts approximately 5 hours.
  • Fourth Press: Turns the lantern off.

To turn off the lantern from any mode, simply press the button until the light extinguishes.

Three images showing the Lepro LED Camping Lantern emitting light in 6000K Daylight White, 3000K Warm White, and 5000K Cool White modes.

Figure 3: Illustration of the three lighting modes.

Key Features

  • Compact and Lightweight: Each lantern weighs only 55g (after battery installation), making it smaller than a standard A19 light bulb. This design allows for easy storage in backpacks, survival kits, or emergency supplies.
  • Versatile Hook Design: Equipped with a durable hanging clip hook on the top, the lantern can be used as a handheld flashlight or conveniently hung inside tents, on branches, or from backpacks.
  • Battery Powered: Operates wirelessly, providing portable illumination for both indoor and outdoor environments.
Image showing a person using the Lepro LED Camping Lantern as a handheld light, and another image showing it hanging from a tree branch at night.

Figure 4: Examples of lantern usage and portability.

Maintenance

  • Cleaning: Wipe the exterior of the lantern with a soft, dry cloth. Do not use abrasive cleaners or immerse the lantern in water.
  • Battery Replacement: When the light dims significantly or stops working, replace all three AAA batteries with new ones. Always replace all batteries at the same time and ensure they are of the same type.
  • Storage: If storing the lanterns for an extended period, remove the batteries to prevent leakage and potential damage to the device. Store in a cool, dry place.

Troubleshooting

ProblemPossible CauseSolution
Lantern does not turn on.Batteries are dead or incorrectly installed.Replace batteries with new AAA batteries, ensuring correct polarity.
Light is dim.Batteries are low.Replace batteries with new AAA batteries.
Cannot switch lighting modes.Button malfunction or very low battery.Replace batteries. If issue persists, contact customer support.

Specifications

FeatureDetail
BrandLepro
Model Number330030-4
Light Source TypeLED
Brightness (High Beam)140 Lumens
Lighting Modes3 (6000K Daylight White, 3000K Soft White, 5000K Cool White)
Power SourceBattery Powered (3 x AAA per lantern)
Battery Life (Low Beam)Approx. 10 hours
Battery Life (High Beam)Approx. 5 hours
MaterialPlastic
Product Dimensions (LxWxH)2.01" x 2.01" x 4.13"
Item Weight (per lantern)55g / 1.94 Ounces (after battery installation)
Water Resistance LevelNot Water Resistant

Warranty and Support

Warranty Information

The Lepro LED Camping Lanterns come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

Customer Support

For technical assistance, warranty claims, or any questions regarding your Lepro LED Camping Lanterns, please visit the official Lepro website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty purposes.

You can find more information and contact details on the Lepro Store on Amazon.

Related Documents - 330030-4

Preview Lepro LED Camping Lantern User Manual and Specifications
Comprehensive user guide for the Lepro LED Camping Lantern, including operating instructions, maintenance, specifications, and safety precautions in multiple languages.
Preview Lepro PR330033 LED Camping Lantern User Guide
User guide for the Lepro PR330033 LED Camping Lantern, providing instructions on usage, battery replacement, features, and safety information. Includes multilingual support and WEEE directive compliance.
Preview Lepro LED Headlamp PR320017 User Manual and Instructions
Detailed user manual for the Lepro LED Headlamp (Model PR320017). Learn about features, operation, charging, safety guidelines, and specifications.
Preview Lepro 320014-2 LED Headlamp User Manual and Specifications
Comprehensive guide for the Lepro 320014-2 LED headlamp, covering lighting modes, usage instructions, safety precautions, technical specifications, and environmental compliance.
Preview Lepro R2 Smart LED Downlight Installation and User Guide
Comprehensive guide for installing and using the Lepro R2 Smart LED Downlight, covering app connection, voice control setup, mounting, and safety information.
Preview Lepro BR2 Smart LED Bulb Setup and Voice Control Guide
Comprehensive guide to setting up your Lepro BR2 Smart LED Bulb. Learn how to connect via Bluetooth and WiFi, integrate with Amazon Alexa and Google Assistant, and troubleshoot common issues. Includes technical specifications and regulatory compliance information.