Tzumi 7258ST
Tzumi ON AIR Halo Light User Manual
Model: 7258ST
Product Overview
The Tzumi ON AIR Halo Light (Model 7258ST) is designed to provide professional-quality illumination for videos and photos directly from your desktop. This versatile device features a 10-inch LED ring light, an adjustable tripod, and a built-in smartphone mount, offering seamless recording convenience and enhanced lighting for various applications.
Its 3-in-1 design integrates the LED ring light, tripod, and smartphone holder, providing a compact and efficient solution for content creation. The light offers adjustable brightness with 10 levels and 3 distinct LED modes to suit different lighting needs.
Image: A person demonstrating the use of the Tzumi ON AIR Halo Light with a smartphone mounted, highlighting its application in content creation.
Package Contents
Please ensure all the following components are present in your package:
- 10-inch LED Ring Light
- Adjustable Desktop Tripod
- Integrated Smartphone Mount
- USB Power Cable
Setup Guide
Follow these steps to set up your Tzumi ON AIR Halo Light:
- Unpack Components: Carefully remove all items from the packaging.
- Assemble Tripod: Extend the legs of the desktop tripod to form a stable base. Place it on a flat, level surface.
- Attach Ring Light: Securely screw the 10-inch LED ring light onto the top of the tripod. Ensure it is tightened to prevent wobbling.
- Mount Smartphone: Open the adjustable smartphone clamp and carefully insert your smartphone. Ensure the phone is centered and held firmly by the clamp.
- Connect Power: Plug the USB power cable into the designated port on the ring light. Connect the other end of the USB cable to a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank).
Image: The Tzumi ON AIR Halo Light fully assembled with a smartphone mounted, ready for use.
Operating Instructions
Once set up, operate your Halo Light using the inline controls on the USB cable:
- Power On/Off: Press the Power Button (usually marked with an ON/OFF symbol) to turn the light on or off.
- Adjust Brightness: Use the + and - buttons to cycle through 10 levels of brightness. Press + to increase brightness and - to decrease it.
- Change LED Modes: Press the Mode Button (often marked with a circle or M) to switch between the 3 available LED lighting modes (e.g., warm, cool, natural).
Care and Maintenance
To ensure the longevity and optimal performance of your Tzumi ON AIR Halo Light, follow these care guidelines:
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the ring light and tripod. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the device in a cool, dry place away from direct sunlight and excessive moisture. You may disassemble the light from the tripod for more compact storage.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which could damage the LED components or the tripod.
Troubleshooting
If you encounter any issues with your Tzumi ON AIR Halo Light, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Light does not turn on. | Ensure the USB cable is securely connected to both the light and a working USB power source. Try a different USB port or power adapter. |
| Light is too dim or too bright. | Use the '+' and '-' buttons on the inline control to adjust the brightness levels. There are 10 levels available. |
| Smartphone is not stable in the mount. | Ensure the smartphone is properly centered and securely clamped within the mount. The mount is designed for universal compatibility, but very thick cases might interfere. |
| Light modes are not changing. | Press the 'Mode' button firmly. Ensure the light is powered on. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 7258ST |
| Product Dimensions | 1 x 1 x 1 inches |
| Item Weight | 1.01 pounds |
| Connectivity Technology | USB |
| Flash Modes Description | Constant illumination, adjustable brightness (10 levels), 3 LED modes |
| Manufacturer | DEEJAYLED |
| Country of Origin | China |
| Date First Available | January 13, 2020 |
Warranty and Support
Tzumi products are manufactured with quality and care. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Tzumi website. If you require technical assistance or have questions not covered in this manual, please contact Tzumi customer support.
For the latest support information and contact details, please visit the Tzumi Store on Amazon or their official brand website.