Product Overview
The VitrA V-care 1.1 Comfort Shower Toilet is a sophisticated wall-hung toilet system designed for enhanced personal hygiene and comfort. It features a rimless design for easy cleaning, integrated bidet functions, and smart controls via a remote.
Key Features
- VitrAclean Technology: Special double glazing process for stain and limescale resistance.
- Automatic lid open/close.
- Front and rear wash functions.
- Adjustable seat temperature, water pressure, and water temperature.
- Includes flexible hose, base, mounting instructions, and manual.
Image: The VitrA V-care 1.1 Comfort Shower Toilet, a sleek white wall-hung unit, is shown with its accompanying remote control. The toilet features a modern, minimalist design with a flat top lid.
Safety Information
Read all instructions carefully before installation and use. Keep this manual for future reference.
- Ensure proper electrical grounding.
- Do not expose the unit to excessive moisture or direct water spray, except for intended cleaning.
- Disconnect power before performing any maintenance or cleaning.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Supervise children to ensure they do not play with the appliance.
Image: The VitrA V-care 1.1 Comfort Shower Toilet is installed in a contemporary bathroom with light grey walls and floor tiles. The toilet is wall-mounted, and its lid is open, revealing the internal bidet nozzle.
Installation and Setup
The VitrA V-care 1.1 Comfort Shower Toilet is designed for wall-mounted installation. Professional installation is recommended.
Pre-installation Checklist
- Verify all components are present: toilet unit, remote control, flexible hose, base, mounting hardware.
- Ensure water supply and electrical connections are available at the installation point.
- Confirm wall structure can support the weight of the wall-hung toilet.
Installation Steps (General Overview)
- Mount the support frame securely to the wall according to local building codes.
- Connect the water supply lines to the toilet unit.
- Connect the electrical power supply.
- Secure the toilet unit to the support frame.
- Install the toilet seat and lid.
- Perform initial water flush and check for leaks.
- Power on the unit and test basic functions.
Image: A front view of the VitrA V-care 1.1 Comfort Shower Toilet installed in a bathroom. The wall-mounted toilet is white, and above it, a black flush plate with two circular buttons is visible. A white remote control is mounted on the wall to the left of the toilet.
Operating Instructions
The VitrA V-care 1.1 Comfort Shower Toilet is operated primarily via its wireless remote control.
Remote Control Functions
The remote control allows for personalized settings and activation of various functions. Refer to the symbols on the remote for specific actions.
- Automatic Lid: The lid automatically opens when approached and closes after use. This feature can be enabled/disabled.
- Washing Functions:
- Rear Wash: Activates the posterior cleansing spray.
- Front Wash: Activates the feminine cleansing spray.
- Water Pressure Adjustment: Increase or decrease spray intensity.
- Water Temperature Adjustment: Adjust water temperature for washing.
- Nozzle Position Adjustment: Fine-tune the nozzle's position.
- Seat Temperature Control: Adjust the temperature of the heated seat.
- Drying Function: Activates the warm air dryer.
- Deodorization: Activates the air purification system.
- Child Function: Provides a gentler wash and lower water pressure suitable for children.
Initial Use and Personalization
Upon first use, familiarize yourself with the remote control. You can save preferred settings for water temperature, pressure, and nozzle position for quick access.
Maintenance and Cleaning
Regular maintenance ensures optimal performance and hygiene of your VitrA V-care 1.1 Comfort Shower Toilet.
Daily Cleaning
- Use a soft cloth and mild, non-abrasive cleaner for external surfaces.
- Clean the nozzle regularly. Most units have a self-cleaning function for the nozzle before and after use.
Descaling
The toilet features a descaling function. Use only VitrA-approved descaling agents to prevent damage. Follow the instructions provided with the descaling agent.
VitrAclean Technology
The special double glazing process of VitrAclean helps prevent water stains and limescale buildup, reducing the need for harsh chemical cleaners.
Image: An overhead view of the VitrA V-care 1.1 Comfort Shower Toilet with its lid fully open. The image highlights the rimless bowl design and the bidet nozzle assembly located at the rear of the bowl.
Troubleshooting
This section provides solutions to common issues. For problems not listed here, contact VitrA customer support.
Common Issues and Solutions
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord unplugged, circuit breaker tripped | Check power connection, reset circuit breaker |
| No water spray | Water supply valve closed, clogged nozzle | Open water supply valve, clean nozzle |
| Remote control not responding | Dead batteries, remote out of range | Replace batteries, move closer to unit |
| Unpleasant odor | Deodorizer filter needs cleaning/replacement | Clean or replace deodorizer filter |
| Lid not opening/closing automatically | Sensor obstructed, feature disabled | Clear obstruction, enable auto-lid function via remote |
Image: A side view of the VitrA V-care 1.1 Comfort Shower Toilet, wall-mounted in a bathroom with blue and grey walls. The sleek, white design of the toilet is prominent, with the remote control visible on the adjacent wall.
Specifications
Detailed technical specifications for the VitrA V-care 1.1 Comfort Shower Toilet.
| Attribute | Value |
|---|---|
| Manufacturer | VitrA |
| Part Number | 5674B003-6194 |
| Product Dimensions | 60 x 38 x 45.5 cm |
| Color | Brown (Note: Product images show white, please verify color upon purchase) |
| Style | Modern metropolis |
| Finish | Coated |
| Material | Ceramic |
| Shape | Wall-hung |
| Installation Method | Wall mount |
| Special Features | Fully automatic, child function, descaling function, drying function, auto soft-close opening |
| Usage | Bathroom |
| First Available Date | January 15, 2020 |
| Seat Material Type | Plastic |
Image: A wide shot of a modern bathroom showcasing the VitrA V-care 1.1 Comfort Shower Toilet on the right wall. The bathroom features a large window, a vanity with a sink, and a tall cabinet, all contributing to a clean, contemporary aesthetic.
Warranty and Support
For warranty information and customer support, please refer to the official VitrA website or contact your local distributor. Keep your proof of purchase for warranty claims.
- Manufacturer: VitrA
- Model: V-care 1.1 Comfort
- Part Number: 5674B003-6194
For technical assistance or service requests, please have your model number and purchase date ready.
