1. Introduction
This manual provides detailed instructions for the assembly, care, and maintenance of your Trumpeter TRU05616 1/350 LPD-21 USS New York Plastic Model Kit. This kit allows you to construct a highly detailed replica of a US amphibian transport dockship from the 2000s.
Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.
Important Safety Information
- WARNING! Not for children under 3 years due to small parts. This product contains small components that may pose a choking hazard.
- This product is not a toy and is intended for hobbyists aged 14 and over.
- Always use appropriate tools and follow safety guidelines when cutting, sanding, and gluing model parts.
- Ensure adequate ventilation when using paints, glues, and solvents.
- Keep all parts and tools out of reach of young children and pets.
Figure 1: Trumpeter TRU05616 1/350 LPD-21 USS New York Plastic Model Kit packaging. This image shows the box art for the model kit, featuring an illustration of the USS New York.
2. Package Contents
Before starting assembly, please verify that all components listed below are present in your kit. If any parts are missing or damaged, please contact Trumpeter customer support.
- Plastic sprues containing 760 parts for the LPD-21 USS New York.
- Photo-etched parts for enhanced detail.
- Decal sheet for markings and insignia.
- Assembly instruction booklet.
- Various landing vehicles, airplanes, and helicopters (model specific).
3. Assembly Instructions (Setup)
This section outlines the general steps for assembling your plastic model kit. Refer to the included instruction booklet for specific part numbers and detailed diagrams.
- Preparation: Carefully remove all parts from their sprues using a hobby knife or sprue cutters. Clean any flash or mold lines with a hobby file or sandpaper. Organize parts by number to facilitate assembly.
- Sub-Assemblies: Begin by assembling smaller sub-sections as indicated in the instruction booklet. This typically includes the hull, superstructure, aircraft, and vehicles.
- Gluing: Use plastic model cement sparingly to join parts. Apply a small amount to one surface and press the parts together firmly. Allow sufficient drying time before handling. For photo-etched parts, use super glue (cyanoacrylate adhesive).
- Painting (Optional): If you plan to paint your model, it is often easier to paint sub-assemblies before final construction. Refer to the instruction booklet for recommended paint colors and schemes.
- Main Assembly: Once sub-assemblies are complete and dry, begin joining them to form the main structure of the LPD-21 USS New York.
- Detailing: Attach smaller detail parts, such as railings, antennas, and weaponry. Apply decals according to the provided guide, using decal setting solutions for best results.
- Final Touches: Inspect the model for any gaps or imperfections. Apply a clear coat if desired to protect the paint and decals.
Note: The kit contains 760 parts, including photo-etched components. Patience and precision are key to achieving a high-quality finished model.
4. Operating Instructions
As a static display model, the Trumpeter TRU05616 1/350 LPD-21 USS New York does not have operational functions. Its primary purpose is for display and appreciation of its detailed craftsmanship.
- Display: Place your finished model on a stable, level surface away from direct sunlight, excessive heat, or humidity to prevent damage or fading.
- Handling: Handle the model carefully, preferably by its base or main hull, to avoid damaging delicate parts such as antennas, railings, or aircraft.
5. Maintenance
Proper maintenance will help preserve the appearance and integrity of your model for years to come.
- Cleaning: Dust the model regularly with a soft, dry brush or a can of compressed air. Avoid using wet cloths or harsh cleaning agents, as these can damage paint and decals.
- Storage: If storing the model, place it in a sturdy box with soft packing material to prevent movement and damage. Ensure it is stored in a cool, dry place.
- Repairs: In case of accidental damage, use appropriate model cement or super glue for repairs. Touch up paint if necessary.
6. Troubleshooting
Here are some common issues and their solutions during model assembly:
| Problem | Solution |
|---|---|
| Missing or Damaged Parts: | Carefully check all sprues and the box. If parts are genuinely missing or damaged, contact Trumpeter customer support with your kit details and proof of purchase. |
| Parts Don't Fit Properly: | Ensure you are using the correct parts as per the instruction booklet. Check for excess plastic (flash) on the edges of parts and carefully trim it away. Dry-fit parts before applying glue. |
| Glue Marks/Smudges: | Use glue sparingly. If plastic cement causes smudges, allow it to dry completely, then gently sand with very fine sandpaper (e.g., 2000 grit) and polish. For super glue, use a debonder if necessary, but exercise extreme caution. |
| Decals Cracking/Not Adhering: | Ensure the surface is clean and smooth. Use decal setting solutions to help decals conform to irregular surfaces and adhere better. Apply a clear gloss coat before decals and a matte/satin clear coat after for protection. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name: | 1/350 LPD-21 USS New York |
| Product Number: | TRU05616 |
| Brand: | Trumpeter |
| Scale: | 1:350 |
| Material: | Plastic |
| Number of Parts: | 760 |
| Assembled Length: | 595.7 mm |
| Assembled Diameter (Beam): | 91 mm |
| Additional Features: | Photo-etched parts, various landing vehicles, airplanes, and helicopters. |
| Recommended Age: | 14+ years |
8. Warranty and Support
Information regarding specific warranty terms for the Trumpeter TRU05616 1/350 LPD-21 USS New York Plastic Model Kit is not provided in the product details. For warranty inquiries, missing parts, or technical support, please contact the manufacturer directly:
- Manufacturer: Trumpeter
- Please refer to the contact information provided on the product packaging or the official Trumpeter website for the most up-to-date support details.
9. Official Product Videos
No official product videos from the seller were found to be relevant for inclusion in this instruction manual.
