CHUNGHOP Universal Remote Control Instruction Manual

1. Introduction

Thank you for choosing the CHUNGHOP Universal Remote Control. This remote is designed to control most LCD, LED, and 4K Smart TVs from various brands. It offers a convenient and easy setup process, making it an ideal replacement for your original TV remote.

The remote control retains its settings even after battery changes, eliminating the need for frequent resets.

Figure 1.1: Front view of the CHUNGHOP Universal Remote Control, showing all buttons including dedicated Netflix and YouTube keys.

2. Setup Instructions

Before using the remote control, please install two AAA batteries (not included) into the battery compartment. Ensure correct polarity.

Figure 2.1: Back view of the remote control with the battery compartment open, showing where to insert two AAA batteries.

This remote control offers several methods for programming. Choose the method that best suits your TV brand and preference.

2.1. No Setup Required (Pre-programmed Brands)

The remote control is pre-programmed to work directly with most LG, Samsung, and Sony TVs. For these brands, simply install batteries and test the remote's functionality.

2.2. Programming by Code Input

1. Turn on your TV and ensure it is in a normal viewing state. Aim the remote control towards the TV.
2. Press and hold the SET button, then press the POWER button. Release both buttons once the indicator lamp on the remote lights up. The remote is now in code input mode.
3. Enter the three-digit code corresponding to your TV brand. The indicator lamp will flash once for each digit entered. After entering all three digits, the indicator lamp will turn off, indicating successful setting.
4. If your TV brand has multiple codes, try the first one listed.
5. Test the remote's functions, such as MUTE. If the remote does not function correctly, repeat steps 2-5 with the next code for your TV brand until a suitable code is found.

Note: If the remote ignores keypresses for 30 seconds during code input, press the SET button to save the last entered code.

2.3. Manual Code Search

1. Turn on your TV and ensure it is in a normal viewing state. Aim the remote control towards the TV.
2. Press and hold the SET button, then press the POWER button. Release both buttons once the indicator lamp on the remote lights up. The remote is now in manual code search mode.
3. Press the VOLUME+ or VOLUME- button once. The indicator lamp will flash once.
4. Check if the volume symbol appears on your TV screen. If not, please repeat this procedure.

2.4. Automatic Code Search

1. Turn on your TV and ensure it is in a normal viewing state. Aim the remote control towards the TV.
2. Press and hold the SET button for approximately 4 seconds until the indicator lamp lights up. The remote will enter automatic search mode.
3. Observe your TV screen for the volume symbol to appear. Once the volume symbol appears, immediately release the SET button. The setting is complete.
4. Test other function buttons (excluding SET, POWER, and VOLUME), such as MUTE. If they are not working, repeat steps 2 and 3 until a suitable code is found.

2.5. Point-to-Point Brand Search

1. Turn on your TV and ensure it is in a normal viewing state. Aim the remote control towards the TV.
2. Locate the corresponding brand button for your TV on the remote control. For example, SHARP is assigned to button '1'.
3. Press and hold the corresponding brand button for 4 seconds. The indicator lamp will flash.
4. When the volume symbol appears on your TV, release the button immediately. The indicator lamp will turn off, and the setting is complete.

Refer to the table below for brand assignments:

2.6. Restore Factory Settings

To reset the remote control to its original factory settings:

1. Press the SET button.
2. Then, press the 0 button.
3. Release both buttons. The indicator lamp will flash twice, confirming that the remote control has been restored to factory settings.

3. Operating Instructions

Once programmed, the CHUNGHOP Universal Remote Control functions similarly to your original TV remote. Point the remote directly at your TV's infrared receiver for optimal performance.

• Power Button: Turns the TV on or off.
• Number Buttons (0-9): Selects channels directly.
• Volume Up/Down: Adjusts the TV volume.
• Channel Up/Down: Changes TV channels sequentially.
• Mute Button: Mutes or unmutes the TV audio.
• Navigation Pad (Up, Down, Left, Right, OK): Navigates menus and confirms selections.
• Netflix & YouTube Keys: Dedicated buttons for quick access to Netflix and YouTube applications (functionality depends on TV's smart features).
• Other Function Buttons: Buttons like P.MODE, S.MODE, ASPECT, SLEEP, HOME, DISP, SOURCE, 3D, SMART, INFO, MYAPP, MENU, EXIT, etc., perform their respective functions as labeled, depending on your TV's capabilities.

Figure 3.1: Angled view of the remote control, illustrating the ergonomic design and clear button layout for easy operation.

4. Maintenance

• Battery Replacement: Replace batteries when the remote's response becomes sluggish or the indicator lamp fails to light up. Always use two new AAA batteries.
• Cleaning: Wipe the remote control with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Lanyard: The remote includes a lanyard for portability and to help prevent loss.

5. Troubleshooting

• Remote not working after battery installation:
  • Ensure batteries are inserted with correct polarity.
  • Replace with fresh batteries.
  • Verify the remote is correctly programmed to your TV using one of the setup methods (Section 2).
• Some buttons not functioning:
  • This may indicate an incorrect or incomplete programming. Try reprogramming the remote using a different code or search method.
  • Ensure your TV supports the specific function (e.g., 3D, Smart features).
• Remote indicator lamp not lighting up:
  • Check battery power and polarity.
  • If the issue persists, the remote may be faulty.
• Remote only controls volume/power, not other functions:
  • This often happens during automatic search if the SET button is released too late. Repeat the automatic search method, releasing the SET button immediately when the volume symbol appears.
  • Try other programming methods.

If you encounter persistent issues, please refer to the support information in Section 7.

6. Specifications

• Brand: CHUNGHOP
• Model: B083QXHX75
• Compatible Devices: Television (LCD, LED, 4K Smart TV)
• Connectivity Technology: Infrared
• Controller Type: Button Control
• Special Feature: Universal compatibility, dedicated Netflix and YouTube keys, lanyard.
• Power Source: 2 x AAA Batteries (not included)

7. Support and Contact Information

For any questions regarding the CHUNGHOP Universal Remote Control, including setup, operation, or troubleshooting, please do not hesitate to contact our customer support team.

We are committed to assisting you and ensuring your satisfaction with our product.

You can typically find contact information on the product packaging or through the retailer where the product was purchased.

"Any questions, please feel free to contact us, we are always here!"