Introduction
Thank you for choosing the Modway Riverside 4-Piece Outdoor Patio Aluminum Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. Please read these instructions carefully before beginning assembly and retain this manual for future reference.
This set is designed to enhance your outdoor living space with its durable construction and comfortable design. It features a powder-coated aluminum frame and UV-resistant fabric cushions, ensuring longevity and style.
Safety Information
- Always assemble the furniture on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum weight capacity of 300 lbs per seat.
- Keep children away from the assembly area. Small parts can be a choking hazard.
- Avoid placing hot items directly on the furniture surface.
- Do not use abrasive cleaners or harsh chemicals, as they may damage the finish.
- In adverse weather conditions (strong winds, heavy rain), consider covering or storing the furniture to prevent damage.
Package Contents
Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- One (1) Riverside Armchair
- One (1) Riverside Armless Chair
- Two (2) Riverside Corner Chairs
- Hardware Pack (bolts, washers, Allen wrench, etc.)
Image: Overview of the Modway Riverside set components, showing a sofa configuration and a separate armchair.
Image: A single Riverside Corner Chair with a navy cushion, featuring a white aluminum frame.
Image: A single Riverside Armless Chair with a navy cushion, showcasing its sleek design.
Image: Rear view of a Riverside Armchair, highlighting the slatted back design and navy cushion.
Setup and Assembly
Follow these steps to assemble your Modway Riverside Outdoor Patio Aluminum Set. It is recommended to have two people for assembly.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to avoid damage.
- Identify Hardware: Separate and identify all bolts, washers, and tools provided in the hardware pack.
- Assemble Frames: For each chair (armchair, armless, corner), attach the backrest and armrests (if applicable) to the seat frame using the provided bolts and washers. Do not fully tighten bolts until all components are loosely assembled.
- Attach Legs: Securely attach the legs to the bottom of each chair frame. Ensure they are oriented correctly.
- Final Tightening: Once all parts are in place for a single chair, gradually tighten all bolts using the Allen wrench. Ensure the chair is stable and level. Repeat for all chairs.
- Place Cushions: Position the seat and back cushions onto the assembled chairs. The cushions are designed to fit snugly.
- Arrange Set: Arrange the armchair, armless chair, and corner chairs in your desired configuration. The corner chairs allow for flexible arrangements.
Note: Some components may come partially pre-assembled. Refer to the specific diagrams included with your physical product for detailed step-by-step visuals.
Operating Guidelines
This outdoor patio set is designed for comfortable seating in outdoor environments.
- Intended Use: Use this furniture exclusively for seating purposes in outdoor patio, deck, or garden areas.
- Weight Distribution: Distribute weight evenly across the seating surface. Avoid standing on the furniture.
- Movement: When moving the furniture, lift it rather than dragging to prevent damage to the legs or frame.
- Cushion Care: While cushions are UV-resistant, prolonged exposure to direct sunlight and heavy rain can affect their lifespan. Consider storing cushions indoors or covering the set when not in use for extended periods.
Care and Maintenance
Proper care will extend the life and appearance of your Modway Riverside set.
- Frame Cleaning: Wipe the powder-coated aluminum frame with a dry cloth regularly to remove dust and dirt. For deeper cleaning, use a mild soap solution and a soft cloth, then rinse thoroughly and dry immediately to prevent water spots.
- Cushion Cleaning: The UV-resistant fabric cushions can be spot cleaned with a mild soap and water solution. Allow to air dry completely. For stubborn stains, consult a professional outdoor fabric cleaner.
- Seasonal Storage: During off-seasons or periods of non-use, it is recommended to store the furniture in a dry, protected area or use a high-quality outdoor furniture cover.
- Hardware Check: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Furniture feels wobbly or unstable. | Loose bolts or uneven surface. | Check and tighten all assembly bolts. Ensure furniture is on a flat, level surface. |
| Cushions appear faded. | Prolonged exposure to direct sunlight. | While UV-resistant, continuous exposure can cause fading over time. Consider using a furniture cover or storing cushions when not in use. |
| Scratches on the frame. | Rough handling during assembly or use. | Use touch-up paint designed for powder-coated aluminum if available. Handle with care during assembly and movement. |
Product Specifications
- Brand: Modway
- Model Number: EEI-3784-WHI-NAV
- Set Includes: 1 Armchair, 1 Armless Chair, 2 Corner Chairs
- Overall Product Dimensions: 114"L x 61.5"W x 28"H
- Item Weight: 97 pounds
- Frame Material: Powder-Coated Aluminum
- Cushion Material: UV-resistant Fabric
- Seat Height: 17 Inches
- Seat Weight Capacity: 300 lbs per seat
- Color: White Navy
Warranty Information
For detailed warranty information regarding your Modway Riverside 4-Piece Outdoor Patio Aluminum Set, please refer to the warranty card included with your purchase or visit the official Modway website. Warranty terms typically cover manufacturing defects under normal use.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Modway customer support:
- Website: Visit the official Modway website for support resources and contact forms.
- Contact Information: Refer to your purchase documentation or the Modway website for current phone numbers and email addresses.