UeeVii CPE450
Contents
UeeVii CPE450 Wireless Bridge Point to Point Outdoor User Manual
Model: CPE450
1. Product Overview
The UeeVii CPE450 is a 5.8G wireless bridge designed for extending network connectivity over long distances, up to 3 kilometers (barrier-free). This point-to-point outdoor Wi-Fi bridge solution is ideal for connecting networks between buildings such as homes, barns, garages, or for extending surveillance camera ranges. It features 14dBi MIMO antennas and is powered by 48V PoE, offering a reliable and cost-effective solution for various outdoor networking needs.

Image: Two UeeVii CPE450 wireless bridge units, illustrating their primary function as a point-to-point connection.
2. Package Contents
Please verify that all items are present and in good condition upon opening the package:
- 2 x CPE450 Wireless Bridge Units
- 2 x 24V PoE Injectors
- 2 x 3FT Test Network Cables
- 2 x Metal Hoops for mounting
- 1 x User Manual (this document)

Image: All components included in the UeeVii CPE450 package.
3. Key Features
- Long-Range Transmission: Capable of transmitting network signals up to 3 kilometers (1.8 miles) in barrier-free environments, ideal for extending networks to distant buildings.
- High-Speed Connectivity: Offers up to 300Mbps wireless transmission speed between the two bridge units and provides two built-in 10/100Mbps RJ45 ports for wired speeds up to 100Mbps.
- 5.8G Frequency Band: Operates on the 5.8GHz frequency, providing a less congested and more stable connection compared to 2.4GHz in many environments.
- Power over Ethernet (PoE): Supports 24~48V POE power supply, simplifying installation and deployment by allowing power and data to be transmitted over a single Ethernet cable.
- Plug and Play Pairing: Pre-configured for point-to-point operation, with an easy dial pairing method using A-B buttons and the RST button, eliminating complex GUI setups.
- Outdoor Durability: Designed to be weatherproof, offering high-temperature and low-temperature resistance, and dustproof properties for reliable outdoor installation.
- Versatile Applications: Suitable for extending network Wi-Fi to other buildings (e.g., barns, garages, shops) and expanding surveillance camera monitoring ranges.

Image: Key features of the UeeVii CPE450, including speed, frequency, and port details.

Image: The UeeVii CPE450 is designed for outdoor use, resistant to various weather conditions.
4. Setup Instructions
The CPE450 units are designed for easy plug-and-play setup. It is highly recommended to perform the initial pairing in a single room before deploying them outdoors.
4.1. Initial Pairing (Recommended Indoor Setup)
- Identify Units: Designate one CPE450 unit as the "Master" (connected to your main router/internet source) and the other as the "Slave" (connected to the remote router/device).
- Set Dip Switches:
- Set the dip switch on the Master antenna to "B".
- Set the dip switch on the Slave antenna to "A".
- Connect PoE Injectors:
- Connect an Ethernet cable from the "POE" port of each PoE injector to the "LAN1" or "LAN2" port on its respective CPE450 unit. Ensure consistency (e.g., always use LAN1).
- Connect the power adapter to each PoE injector.
- Connect to Network (for pairing):
- For the Master unit: Connect an Ethernet cable from the "LAN" port of its PoE injector to a LAN port on your main router (the one with internet access).
- For the Slave unit: For initial pairing, you can connect the "LAN" port of its PoE injector to a computer or a temporary router to verify connectivity.
- Power On: Plug in both PoE injectors to a power outlet. The units will power on.
- Configure Channel (Dial Pairing):
- On the Master unit, press the "RST" button (often labeled "Configure" or "A-B"). The digital display will show "H" and start blinking.
- Press the "RST" button repeatedly to cycle through channels (1-8). Select a channel (e.g., "1") and stop pressing the button. The selected channel number will continue to blink.
- Repeat the same process for the Slave unit, selecting the exact same channel number as the Master unit.
- Verify Pairing: If the units have a clear line of sight (even across a room), the channel numbers on both digital displays should stop blinking within 30 seconds or less, indicating successful pairing. The green indicator lights on the side of the antennas should also light up, showing signal strength, and the LAN light corresponding to the connected port should be lit.
4.2. Outdoor Deployment
Once paired, the units retain their settings even after being unplugged. You can now deploy them in their final outdoor locations.
- Mounting: Use the provided metal hoops to securely mount the CPE450 units to poles or suitable structures. Ensure they are mounted face-to-face with a clear line of sight between them, free from obstructions like trees or buildings.
- Connect Master Unit:
- Connect an Ethernet cable from the "POE" port of the Master's PoE injector to the CPE450 Master unit.
- Connect the "LAN" port of the Master's PoE injector to a LAN port on your main internet router.
- Connect Slave Unit:
- Connect an Ethernet cable from the "POE" port of the Slave's PoE injector to the CPE450 Slave unit.
- Connect the "LAN" port of the Slave's PoE injector to the WAN/Internet port (or a LAN port configured as WAN) of a secondary Wi-Fi router or directly to a device (e.g., computer, surveillance DVR) at the remote location. If using a secondary Wi-Fi router, ensure it is configured as an "Access Point" to avoid network conflicts.
- Power On: Plug in both PoE injectors to a power source. The units will re-establish their connection automatically.
- Aiming: Fine-tune the aiming of both units to achieve the strongest possible signal strength, indicated by the green LEDs on the side of the units.

Image: Typical setup diagrams for network extension and surveillance camera extension.

Image: Conceptual diagram of Master and Slave bridge deployment for network extension.
5. Operating the Wireless Bridge
Once properly set up and paired, the UeeVii CPE450 wireless bridge operates as a transparent network cable, extending your existing network wirelessly. It requires no further user interaction for its primary function.
- Automatic Connection: The units will automatically connect and maintain the wireless link as long as they are powered on and have a clear line of sight.
- Network Extension: Any device connected to the network at the Slave unit's location will have access to the internet and local network resources provided by the Master unit's network.
- Speed: The system provides up to 100Mbps wired speed at the remote end, suitable for streaming, browsing, and surveillance applications.
- Monitoring: The green signal strength LEDs on the side of each unit provide a visual indication of the link quality. More lit LEDs indicate a stronger signal.
6. Maintenance
The UeeVii CPE450 is designed for minimal maintenance due to its robust outdoor construction. However, periodic checks can ensure optimal performance and longevity.
- Clear Line of Sight: Periodically check that the line of sight between the two units remains unobstructed by new foliage growth, building additions, or other obstacles.
- Physical Inspection: Inspect the units and cables for any visible damage, wear, or loose connections, especially after severe weather conditions.
- Cleaning: If necessary, gently wipe the exterior of the units with a soft, damp cloth to remove dust or dirt. Do not use harsh chemicals or abrasive materials.
- Secure Mounting: Ensure the mounting hardware remains secure and the units are firmly in place.
7. Troubleshooting
If you encounter issues with your UeeVii CPE450 wireless bridge, refer to the following common troubleshooting steps:
- No Connection / No Internet:
- Check Power: Ensure both CPE450 units and their PoE injectors are powered on and receiving electricity.
- Verify Cables: Confirm all Ethernet cables are securely connected to the correct ports (POE to CPE, LAN to router/device).
- Line of Sight: Ensure there is a clear, unobstructed line of sight between the two units. Even partial obstructions can significantly degrade performance.
- Re-pair Units: If the digital display on the units is blinking or showing an unexpected number, try re-pairing them by setting the same channel on both units using the "RST" button as described in the Setup section.
- Check Router Configuration: If using a secondary router at the remote end, ensure it is correctly configured as an "Access Point" and not causing IP conflicts.
- Slow Speed:
- Signal Strength: Check the green signal strength LEDs on the units. If fewer LEDs are lit, the signal is weak. Adjust aiming for better alignment.
- Obstructions: Even minor obstructions can impact speed. Re-evaluate the line of sight.
- Interference: While 5.8GHz is less congested, other 5.8GHz devices or strong electromagnetic interference could affect performance. Try changing the channel during pairing.
- Units Not Pairing:
- Dip Switches: Double-check that the Master unit's dip switch is set to "B" and the Slave unit's to "A".
- Same Channel: Ensure you have selected the exact same channel number on both units during the dial pairing process.
- Proximity for Pairing: For initial pairing, ensure the units are close to each other (e.g., in the same room) to establish the link easily.
For further assistance, please contact UeeVii customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | CPE450 |
| Brand | UeeVii |
| Frequency Band Class | Single-Band (5.8 GHz) |
| Wireless Communication Standard | 802.11n, 802.11a, 802.11ac |
| Transmission Distance | Up to 3KM (Barrier-free) |
| Wired Speed | Up to 100Mbps (via 10/100Mbps RJ45 ports) |
| Antenna Gain | 14dBi MIMO Antenna |
| Power Supply | 24~48V POE |
| Special Features | Weatherproof, Access Point Mode, LED Indicator, Remote Access |
| Product Dimensions | 12 x 7 x 3 inches |
| Item Weight | 8 ounces |
| FCC ID | 2A6EJ-CPE450 (Complies with Part 15 of FCC Rules) |

Image: FCC ID and digital display on the CPE450 unit.
9. Warranty and Support
UeeVii is committed to providing reliable products and excellent customer service.
- Warranty: The CPE450 comes with a 2-year warranty replacement.
- Technical Support: Lifetime technical support is provided for this product.
- Customer Service: Expect quality customer service within 24 hours for any inquiries or issues.
For support, please refer to the contact information provided with your purchase or visit the official UeeVii website.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.