Introduction
Thank you for choosing the JESLED Solar Security Light. This manual provides detailed instructions for the installation, operation, and maintenance of your solar-powered outdoor light. Designed for efficiency and convenience, this light features 108 LED beads, a motion sensor, and multiple operating modes to enhance security and illumination in various outdoor settings.
Image: The JESLED Solar Security Light, featuring a large LED panel and an adjustable solar panel on top.
Product Overview
Key Features
- High Brightness: Equipped with 108 LED beads for superior illumination.
- Adjustable Solar Panel: The solar panel can rotate and swing 180 degrees, allowing for optimal sunlight absorption.
- Multiple Operating Modes: Four distinct modes including Infrared Sensing, Infrared Sensing and Dimming, Dimming, and Emergency Mode.
- Energy Efficient: Solar-powered operation reduces electricity consumption.
- Type-C Charging: Supports Type-C charging for supplementary power when solar charging is insufficient.
- Easy Installation: Wireless design with included screws for straightforward mounting.
- Durable Design: Suitable for various outdoor environments like gardens, patios, pathways, and garages.
Components
The JESLED Solar Security Light package includes the following components:
- Solar-powered LED light fixture
- Mounting screws and wall plugs
- Separate battery compartment (integrated)
Image: Detailed view of the solar light's adjustable features, including the solar panel and base, along with its Type-C charging capability.
Image: Detailed diagram showing the USB connector, motion sensor, switch button, 108 LED pieces, charging indicator light, turn off indicator light, and mode indicator lights (Mode 1, Mode 2, Mode 3).
Setup and Installation
The JESLED Solar Security Light is designed for easy, wireless installation. Follow these steps to mount your light:
- Choose a Location: Select an outdoor location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging. The recommended installation height is 2.5m to 4m.
- Mark Drill Holes: Use the light's mounting bracket to mark the positions for drilling on the wall.
- Drill Holes: Drill holes at the marked positions.
- Insert Wall Plugs: Insert the provided wall plugs into the drilled holes.
- Secure the Bracket: Align the mounting bracket with the wall plugs and secure it using the provided screws.
- Attach the Light: Slide the solar light onto the secured mounting bracket. Ensure it is firmly attached.
- Adjust Solar Panel: Adjust the solar panel's angle (up to 180 degrees) to face the direction of maximum sunlight.
Image: Visual guide demonstrating the simple four-step installation process for the solar light.
Operating Modes
The JESLED Solar Security Light features four intelligent operating modes, selectable via the switch button on the unit. Press the button to cycle through the modes.
- Mode 1: Infrared Sensing Mode
The light remains off until motion is detected. Upon detection, it turns on at full brightness and then turns off after a set period of no motion. - Mode 2: Infrared Sensing and Dimming Mode
The light stays on at a dim brightness when no motion is detected. When motion is detected, it switches to full brightness and then returns to dim mode after a set period of no motion. - Mode 3: Dimming Mode
The solar light stays on at a continuous lower brightness throughout the night. It automatically turns on at dusk and off at dawn using its built-in sensor. - Mode 4: Emergency Mode (Highlight Mode)
To activate, press and hold the power button for 3 seconds. The light will stay on at high brightness continuously. This mode is suitable for situations requiring constant illumination.
Image: Visual representation of how each of the four lighting modes functions in response to motion and ambient light conditions.
Charging
Your JESLED Solar Security Light is primarily powered by solar energy, but also offers an alternative charging method.
- Solar Charging: The integrated solar panel charges the internal battery during daylight hours. Ensure the solar panel is positioned to receive maximum direct sunlight for 6-8 hours to achieve a full charge, providing up to 12 hours of lighting at night.
- Type-C Charging: For periods of insufficient sunlight or when a quicker charge is needed, the light can be charged via a Type-C USB cable (not included). Connect a standard Type-C charger to the USB connector on the light.
Image: Illustration of the solar light's functionality, demonstrating daytime charging and nighttime illumination.
Maintenance
To ensure optimal performance and longevity of your JESLED Solar Security Light, periodic maintenance is recommended:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures efficient sunlight absorption and charging. This should be done approximately every six months, or more frequently in dusty or snowy environments.
- Inspect for Obstructions: Ensure no trees, buildings, or other objects are blocking direct sunlight from reaching the solar panel.
- Check Mounting: Periodically verify that the light is securely mounted and that all screws are tight.
Troubleshooting
If you encounter issues with your JESLED Solar Security Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel receives 6-8 hours of direct sunlight daily. Clean the solar panel. Use Type-C charging if necessary. |
| Motion sensor not detecting. | Sensor obstructed or incorrect mode. | Clear any obstructions from the sensor. Ensure the light is in Mode 1 or Mode 2. Test detection range (typically 3-5 meters). |
| Light is dim or flickers. | Low battery charge. | Allow the light to charge fully in direct sunlight. If persistent, use Type-C charging. |
| Light stays on continuously in motion modes. | Sensor constantly triggered or stuck in Emergency Mode. | Ensure no constant movement near the sensor. Cycle through modes to exit Emergency Mode (Mode 4). |
Specifications
| Feature | Detail |
|---|---|
| Brand | JESLED |
| Model Number | QY-JDEU-108LED |
| Product Dimensions | 19 x 18 x 6.5 cm |
| Item Weight | 400 g |
| Number of LEDs | 108 |
| Power Source | Solar Powered, Type-C Charging |
| Battery | 1 Lithium Polymer battery (included) |
| Voltage | 3.7 Volts |
| Wattage | 10.8 watts |
| Luminous Flux | 800 lumen |
| Colour Temperature | 6000 Kelvin (Hot White) |
| Material | Plastic |
| Special Features | Energy Efficient, Motion Sensor, Rotatable Solar Panels |
| Switch Style | Touch switch and motion sensor |
| Installation Type | Wall Mount |
| Specific Uses | Garden, Pathway, Patio, Walkway, Yard |
Warranty and Support
JESLED is committed to providing quality products and customer satisfaction.
- Warranty: This product comes with a 2-year warranty, with a 1-year warranty specifically for the battery.
- Return Policy: A 60-day full refund policy is offered.
- Customer Service: For any questions or concerns, please contact JESLED customer service. 24-hour after-sales support is available.
Image: JESLED After-Sales support details, highlighting warranty, support availability, and return policy.
