Leviton 30A 2-Pole Smart GFPE Plug-On Circuit Breaker (LB230-ES) Instruction Manual

1. Product Overview

The Leviton LB230-ES is a 30A 2-Pole Smart Ground Fault Protection of Equipment (GFPE) Plug-On Circuit Breaker designed for use in Leviton Load Centers. This smart breaker integrates with the My Leviton app, offering insightful data on home energy consumption, enhanced safety features, and whole-home solutions when combined with other Leviton smart products. Its hydraulic-magnetic precision trip technology ensures reliable operation across a wide temperature range from -40°C to 85°C (-40°F to 185°F) without requiring re-rating. The plug-on design simplifies installation, making it a convenient and efficient choice for modern electrical systems.

Figure 1: Front view of the Leviton LB230-ES 30A 2-Pole Smart GFPE Plug-On Circuit Breaker, showing the ON/OFF switch and GFPE indicator.

2. Installation and Setup

Installation of circuit breakers should only be performed by a qualified electrician in accordance with all local and national electrical codes. The Leviton Load Center's design allows for efficient wiring at the rough-in stage, even before breakers are installed, simplifying the process.

2.1 Wiring the Load Center

• Ensure all power to the load center is disconnected at the main service entrance before beginning any work.
• Branch phase and neutral connections are made directly on the load center panel.
• Neatly land all wires at the rough-in stage.

Figure 2: Side view of the Leviton circuit breaker, illustrating the plug-on connection mechanism for the load center busbar.

2.2 Installing the Breaker

• Once wiring is complete, simply snap the LB230-ES plug-on circuit breaker into the appropriate position on the Leviton Load Center busbar. No additional wiring is required for the breaker itself.
• Ensure the breaker is firmly seated and makes proper contact with the busbar.

2.3 Initial Power-Up and App Integration

• After all breakers are installed and the load center cover is secured, restore power at the main service entrance.
• Download the My Leviton app to integrate the smart GFPE breaker. Follow the in-app instructions to connect the breaker to your home network and enable smart features.

3. Operation

3.1 Manual Operation

• To turn the circuit ON, push the breaker handle firmly to the "ON" position.
• To turn the circuit OFF, push the breaker handle firmly to the "OFF" position.
• In case of an overload or ground fault, the breaker will automatically trip to the center position. To reset, push the handle fully to "OFF" and then to "ON".

3.2 Smart Features via My Leviton App

The My Leviton app provides advanced control and monitoring capabilities for your smart GFPE breaker:

• Energy Monitoring: View real-time energy consumption data for the circuit protected by the LB230-ES breaker. This allows for better understanding and management of energy usage.
• Remote Control: Turn the breaker ON or OFF remotely through the app, providing convenience and control from anywhere.
• Electrical Anomaly Notifications: Receive alerts for unusual electrical activity or potential issues on the circuit, enhancing safety and allowing for proactive intervention.
• Enhanced Safety: The app integration contributes to overall home safety by providing immediate feedback on circuit status.

4. Maintenance

The Leviton LB230-ES Smart GFPE Breaker is designed for minimal maintenance. However, periodic checks are recommended to ensure continued safe and optimal performance.

• Visual Inspection: Periodically inspect the breaker for any signs of physical damage, discoloration, or loose connections.
• Self-Test Function: While this specific model is GFPE, Leviton's advanced breakers often incorporate self-test features. Ensure any accessible test buttons are pressed monthly to verify proper ground fault protection.
• Keep Clear: Ensure the area around the load center and breakers is kept clear of obstructions and debris to allow for proper ventilation and access.

5. Troubleshooting

If your Leviton LB230-ES Smart GFPE Breaker trips or you experience issues, consider the following:

• Breaker Trips: If the breaker trips to the center position, it indicates an overload or ground fault. Disconnect any recently connected appliances or devices on that circuit. Push the breaker handle fully to "OFF" and then to "ON" to reset. If it trips again immediately, there may be a persistent fault or overload that requires professional attention.
• No Power to Circuit: Ensure the breaker is in the "ON" position. Check the My Leviton app for any anomaly notifications or remote control status.
• App Connectivity Issues: Verify your home Wi-Fi network is operational. Ensure the My Leviton app is updated to the latest version. Refer to the app's help section for specific connectivity troubleshooting steps.
• Persistent Issues: For any persistent electrical issues or if you are unsure about troubleshooting steps, contact a qualified electrician.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

The Leviton LB230-ES Smart GFPE Plug-On Circuit Breaker comes with a 10-Year Limited Warranty. Please refer to the official Leviton warranty documentation for full terms and conditions, including coverage details and limitations.

7.2 Customer Support

For technical assistance, product inquiries, or warranty claims, please contact Leviton Customer Support. Visit the official Leviton website for contact information, FAQs, and additional resources.

Important Safety Notice: Electrical work can be hazardous. Always consult with a qualified electrician for installation, maintenance, or any complex electrical issues to ensure safety and compliance with electrical codes.