LEONLITE 4FT LED Utility Shop Light with Motion Sensor - Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LEONLITE 4FT LED Utility Shop Light. This fixture is designed for various applications such as garages, workshops, and utility rooms, featuring a built-in motion sensor and a linkable design for expanded coverage. Please read this manual thoroughly before installation and use to ensure proper function and safety.

This image displays the LEONLITE 4FT LED Utility Shop Light in a laundry room setting, highlighting its motion activation, 40W power consumption (replacing 120W), 125-degree beam angle, 50,000-hour lifespan, and 3-year warranty. ETL and FCC certifications are also visible.

2. Safety Information

• Read all instructions carefully before attempting installation or operation.
• Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture.
• Do not modify the fixture or use it for purposes other than its intended use.
• Ensure all electrical connections are made in accordance with local codes and ordinances. If you are unsure, consult a qualified electrician.
• Do not install near heat sources or in areas with excessive moisture.
• Avoid looking directly into the LED light source when illuminated.
• This product is for indoor use only.

3. Package Contents

Verify that all components listed below are included in your package:

• LED Light Fixture (with integrated motion sensor)
• Power Cord (4.92 ft)
• Hanging Chains
• S-Hooks
• Eye Hooks
• Plastic Anchors
• Screws

This image displays the components included in the package, such as the LED light fixture, power cord (UL Listed), hanging chains, S-hooks, eye hooks, plastic anchors, and screws. It also indicates the product dimensions: approximately 47.81 inches (1214.5mm) in length, 5.15 inches (130.7mm) in width, and 1.99 inches (50.5mm) in height, with a 4.92ft power cord.

4. Specifications

This image visually represents the light output, specifying a 5000K daylight color temperature and 4000 lumens of brightness. The fixture has a lifespan of 50,000 hours.

5. Installation Instructions

The LEONLITE 4FT LED Utility Shop Light can be installed using either suspended mounting or surface mounting methods. Always ensure power is disconnected before beginning installation.

5.1 Suspended Mounting

1. Step 1: Mount the eye hooks to the ceiling using the provided plastic anchors and screws. Ensure they are securely fastened and spaced appropriately for the fixture's length.
2. Step 2: Install the S-hooks into the ends of the hanging chains.
3. Step 3: Install the other end of the S-hooks into the end caps of the LED lamp.
4. Step 4: Attach the assembled components (lamp with chains) to the eye hooks mounted on the ceiling. Adjust the chain length to achieve the desired hanging height.

5.2 Surface Mounting

1. Step 1: Secure the screws to the ceiling, leaving a small gap between the screw head and the ceiling surface. These screws will fit into the 'church key' holes on the back of the fixture.
2. Step 2: Align the fixture's 'church key' holes with the secured screws. Push the fixture up and slide it to lock it into place on the ceiling. Tighten the screws if necessary to secure the fixture firmly.

5.3 Connecting Power and Linking Units

1. Step 1: Once the fixture is securely mounted, connect the power cord to a standard 120V AC outlet.
2. Step 2 (for linking): To link multiple units, connect the power cord of the first fixture to an outlet. Then, use the provided linking cords to connect up to 3 additional fixtures to the first one. The plug-n-play design allows for easy connection without extra wiring. A maximum of 4 units can be linked in a single run.

This graphic provides step-by-step instructions for two installation methods: suspended mounting and surface mounting. Suspended mounting involves attaching eye hooks to the ceiling, installing S-hooks to chains and the lamp, then attaching the assembly. Surface mounting involves securing screws to the ceiling, locking the fixture, and connecting power.

This image demonstrates the extendable design, allowing up to 4 units to be connected together in a single run using the provided power cords. The line length of the connecting cord is 4.92 feet.

6. Operating Instructions

6.1 Motion Sensor Functionality

The LEONLITE Utility Shop Light features a built-in motion sensor for hands-free operation:

• Automatic On: The light will automatically turn on when motion is detected within its 16.4-foot radius detection range.
• Automatic Off: If no motion is detected for approximately 10 minutes, the light will automatically turn off.
• Detection Range: The motion sensor has a detection distance of up to 32.8 feet (diameter) when the fixture is hung at a height of 32.8 feet. The actual detection distance may vary based on the installation height and environmental factors.

This diagram illustrates the motion sensor's detection capabilities. It shows an auto-on function when motion is detected and an auto-off function after 10 minutes of no motion. The detection distance is approximately 32.8 feet (diameter) when the hang height is 32.8 feet, with a 16.4-foot radius. Detection distance may vary based on different hang heights.

6.2 Linkable Operation

When multiple units are linked, the motion sensor on the primary unit will control the on/off state of all connected fixtures. Ensure all linked fixtures are within the same power circuit for consistent operation.

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your LED shop light:

• Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Inspection: Periodically inspect the power cord and connections for any signs of damage or wear. If any damage is found, discontinue use and contact customer support.
• Motion Sensor: Keep the motion sensor lens clean and free from obstructions to ensure accurate detection.

8. Troubleshooting

If you encounter issues with your LEONLITE LED Utility Shop Light, refer to the following troubleshooting guide:

If these steps do not resolve the issue, please contact customer support for further assistance.

9. Warranty and Support

This LEONLITE product is typically backed by a 3-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or replacement parts, please contact LEONLITE customer service through their official website or the retailer where the product was purchased. Provide your model number (R3-XL1SL-40W50-MSS-4P) and a detailed description of the issue for faster service.