APPASO Black and Gold Touchless Kitchen Faucet with Soap Dispenser User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your APPASO Black and Gold Touchless Kitchen Faucet with Soap Dispenser. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

2. Product Overview

2.1 Key Features

• Motion Sensing Technology: Hands-free operation with automatic water flow activation and a 3-minute auto-shutoff to prevent unintentional water waste.
• Multifunctional Sprayer: Easily switch between a splash-free aerated stream and a powerful pre-rinse spray. The 360-degree rotation design enhances cleaning coverage.
• Zero Leakage Risk: Equipped with an advanced ceramic valve core, tested for 500,000 cycles, ensuring drip-free performance and water conservation. Features exceptional heat resistance and anti-aging properties.
• Spot Resistant Finish: Utilizes 7-layer PVD technology for a spot-resist stainless finish that minimizes fingerprints and water spots, maintaining a cleaner appearance.
• Easy Installation: Designed with a quick-connection system for straightforward installation, typically completed in approximately 20 minutes without specialized tools or professional plumbers.

2.2 Included Components

Verify that all components are present before beginning installation:

• APPASO Kitchen Faucet with Motion Sensor
• Mounting Accessories
• User Manual (this document)
• Weight Ball
• Deck Plate
• Control Box
• Soap Dispenser

3. Setup and Installation

The APPASO touchless kitchen faucet is designed for easy installation using its quick-connection system. Follow these general steps for installation. Refer to the included installation guide for detailed diagrams and specific instructions.

1. Prepare the Sink: Ensure the sink area is clean and clear. If replacing an old faucet, remove it and clean any residue.
2. Install the Faucet Body: Insert the faucet body through the mounting hole(s) on your sink or countertop. Secure it from underneath using the provided mounting accessories. If your sink has multiple holes, use the included deck plate.
3. Connect Water Lines: Connect the hot and cold water supply lines to the corresponding inlets on the faucet. Ensure connections are tight to prevent leaks. Note: Supply lines may require extensions depending on your setup.
4. Install the Control Box: Mount the control box for the motion sensor in an accessible location under the sink. Connect the faucet's sensor cable and water lines to the control box as per the detailed instructions.
5. Install the Weight Ball: Attach the weight ball to the pull-down hose beneath the sink. This ensures the sprayer retracts smoothly.
6. Install the Soap Dispenser: Insert the soap dispenser into its designated hole on the sink or countertop and secure it. Fill with liquid soap.
7. Test the Faucet: Turn on the water supply and check for leaks. Test the manual handle operation and the motion sensor functionality.

Installation typically takes around 20 minutes. No specialized tools are generally required.

4. Operating Instructions

4.1 Manual Operation

• Water Flow: Use the single handle to manually turn the water on or off.
• Temperature Control: Adjust the handle left or right to control the water temperature (hot or cold).
• Flow Rate: Move the handle up or down to adjust the water flow rate.

4.2 Motion Sensor Operation

• Activation: Wave your hand or an object in front of the motion sensor located on the faucet body. Water will begin to flow automatically.
• Deactivation: Water will automatically turn off after 3 minutes of continuous flow or when you wave your hand in front of the sensor again.
• Temperature Setting: The temperature for sensor-activated water flow is typically set by the position of the manual handle. Set the handle to your desired temperature before using the sensor.

4.3 Pull-Down Sprayer

• Extend Sprayer: Gently pull down the sprayer head from the faucet spout. The flexible hose allows for extended reach.
• Switch Spray Modes: Use the button or switch on the sprayer head to toggle between the aerated stream and the powerful spray.
• Retract Sprayer: Once finished, guide the sprayer head back into the spout. The weight ball will assist in smooth retraction.
• 360-Degree Swivel: The faucet spout can swivel 360 degrees, providing flexibility for various sink tasks.

5. Maintenance

Regular maintenance will help preserve the appearance and functionality of your APPASO faucet.

• Cleaning the Finish: Clean the faucet regularly with a soft, damp cloth. Use mild soap if necessary. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the spot-resistant PVD finish.
• Cleaning the Sprayer Nozzles: If water flow becomes irregular, the sprayer nozzles may be clogged. Gently rub the rubber nozzles to dislodge mineral deposits. For stubborn clogs, unscrew the sprayer head (if applicable) and soak it in a vinegar solution.
• Ceramic Valve Core: The advanced ceramic valve core is designed for long-term, drip-free performance and typically requires no maintenance.
• Sensor Maintenance: Keep the sensor window clean and free from obstructions to ensure optimal performance.

6. Troubleshooting

If you encounter issues with your faucet, refer to the following common troubleshooting steps:

If these steps do not resolve the issue, please contact APPASO customer support for further assistance.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please contact APPASO customer service. Keep your purchase receipt as proof of purchase.

Contact Information: Please refer to the APPASO official website or your purchase documentation for the most current contact details.