ZEBRONICS Zeb-Supreme USB Wired Headphone with Mic User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your ZEBRONICS Zeb-Supreme USB Wired Headphone with Mic. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image: ZEBRONICS Zeb-Supreme USB Wired Headphone with Mic, showcasing the over-ear design, adjustable microphone, and in-line USB control pod.

Setup Instructions

The Zeb-Supreme headphone features a simple plug-and-play USB connection for quick setup.

1. Connect to Device: Locate an available USB port on your computer (PC or Laptop).
2. Insert USB Connector: Plug the USB connector of the headphone into the USB port.
3. Driver Installation: Your operating system should automatically detect and install the necessary drivers. This process may take a few moments.
4. Audio Settings: Once installed, ensure that "ZEBRONICS Zeb-Supreme" is selected as the default audio input and output device in your computer's sound settings.

Image: Close-up of the USB interface, illustrating the direct USB connection for the headphone.

Operating Instructions

Adjusting the Headphone

• Headband Adjustment: Gently slide the earcups up or down along the headband to achieve a comfortable fit over your ears.
• Microphone Positioning: The microphone is adjustable. Position it approximately 2-3 cm from your mouth for optimal voice clarity.

Image: Side view of the headphone demonstrating the adjustable headband mechanism.

Image: Close-up of the flexible, adjustable microphone boom.

In-line Control Pod Functions

The headphone features an in-line control pod for easy access to audio and microphone functions.

• Volume Up/Next: Press the '+' button to increase volume. In some applications, a long press may skip to the next track.
• Volume Down/Previous: Press the '-' button to decrease volume. In some applications, a long press may go to the previous track.
• Play/Pause/Mute: Press the central button to play or pause audio. During a call, this button can mute or unmute the microphone.
• Mic On/Off Switch: A dedicated switch allows you to quickly enable or disable the microphone.
• Power Indicator: An LED light indicates the power status of the headphone.
• Mic Off Indicator: A separate LED indicates when the microphone is muted.

Image: Detailed view of the in-line control pod, showing buttons for volume, play/pause, mic mute, and indicator lights.

Maintenance and Care

• Cleaning: Use a soft, dry cloth to wipe the earcups and headband. For the microphone, a slightly damp cloth can be used, ensuring no moisture enters the microphone grille. Avoid harsh chemicals or abrasive cleaners.
• Storage: When not in use, store the headphone in a clean, dry place away from direct sunlight and extreme temperatures. Avoid tangling the cable.
• Cable Care: Do not pull the cable forcefully or bend it sharply, as this can damage the internal wiring. Always grasp the USB plug when disconnecting.
• Avoid Moisture: The headphone is not water-resistant. Keep it away from liquids to prevent damage.

Troubleshooting

Product Specifications

Warranty and Support

Your ZEBRONICS Zeb-Supreme USB Wired Headphone with Mic is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ZEBRONICS website.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ZEBRONICS customer support:

• Manufacturer: ZEBRONICS
• Website: www.zebronics.com (Please check the official website for the most current contact information.)