1. Introduction
Thank you for choosing the AREBOS Telescopic Kitchen Drawer Insert. This product is designed to enhance your kitchen organization by providing easily accessible storage within your cabinets. Its robust stainless steel construction and smooth telescopic slides ensure durability and convenience. Please read this manual carefully before installation and use to ensure proper function and longevity of your product.
Figure 1: AREBOS Telescopic Kitchen Drawer Insert
2. Safety Instructions
- Load Capacity: Do not exceed the maximum load capacity of 20 kg (44 lbs). Overloading can damage the product and cause injury.
- Installation: Ensure the drawer is securely mounted to a stable cabinet structure. Loose installation can lead to the drawer falling out.
- Children: Keep small children away from the installation area. The product contains small parts that could be a choking hazard.
- Sharp Edges: Handle with care during installation to avoid injury from sharp edges.
- Maintenance: Regularly check all screws and connections to ensure they remain tight.
Figure 2: Maximum Load Capacity Demonstration (20 kg)
3. Package Contents
Verify that all components are present before beginning installation. If any parts are missing or damaged, please contact customer support.
- 1x Wire Basket (60 cm)
- 2x Telescopic Ball-Bearing Slides
- Mounting Hardware (screws, brackets)
Figure 3: Included Components
4. Specifications
| Feature | Specification |
|---|---|
| Brand | AREBOS |
| Model | 4260627420407 |
| Color | Silver |
| Product Dimensions (L x W x H) | 44 x 47 x 14 cm (for 60 cm cabinet width) |
| Item Weight | 7.66 kg |
| Maximum Load Capacity | 20 kg |
| Material | Stainless Steel |
| Special Features | Telescopically extendable, smooth-gliding, adjustable with cushioned rails |
| Number of Compartments | 2 |
| Mounting Type | Cabinet Floor-mounted |
Figure 4: Product Dimensions
5. Setup & Installation
Required Tools (not included): Measuring tape, pencil, screwdriver, drill (optional, for pilot holes).
- Measure Cabinet Space: Before installation, measure the internal width and depth of your cabinet to ensure the drawer (44 x 47 x 14 cm for the 60 cm model) will fit correctly. Allow sufficient clearance for the slides.
- Separate Slides: Gently pull the telescopic slides apart. The inner part of the slide will detach from the outer part. The outer part attaches to the cabinet, and the inner part attaches to the basket.
- Mount Outer Slides to Cabinet: Position the outer slide rails on the bottom sides of your cabinet, ensuring they are level and parallel. Mark the screw holes with a pencil. Use the provided screws to securely attach the outer slides to the cabinet walls or base.
- Attach Inner Slides to Basket: Align the inner slide rails with the mounting points on the wire basket. Secure them using the provided screws.
- Insert Basket into Cabinet: Carefully slide the basket (with inner rails attached) into the outer rails mounted in the cabinet. Ensure the ball bearings engage smoothly.
- Test Functionality: Gently pull the drawer in and out to ensure it slides smoothly and without obstruction. Adjust if necessary.
Figure 5: Drawer Retracted
Figure 6: Ball-Bearing Slide Mechanism
6. Operating Instructions
The AREBOS telescopic drawer is designed for simple and efficient use.
- Opening the Drawer: Gently pull the front of the wire basket towards you. The ball-bearing slides will extend smoothly, allowing full access to the contents.
- Closing the Drawer: Push the basket back into the cabinet until it is fully retracted. The cushioned rails ensure a quiet and smooth return.
- Loading: Distribute items evenly within the basket to maintain balance and prevent strain on the slides. Do not exceed the 20 kg weight limit.
Figure 7: Drawer Extended
Figure 8: Example of Drawer Use in a Cabinet
7. Maintenance & Care
To ensure the longevity and optimal performance of your AREBOS drawer, follow these simple care instructions:
- Cleaning: Wipe the stainless steel surfaces with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads, which can scratch the finish. Dry thoroughly after cleaning.
- Slide Lubrication: If the slides begin to feel stiff or noisy over time, apply a small amount of silicone-based lubricant to the ball bearings. Do not use oil-based lubricants, as they can attract dust and debris.
- Inspection: Periodically inspect the mounting screws and slide mechanisms for any signs of loosening or wear. Tighten screws as needed.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawer does not slide smoothly. | Misalignment of slides, debris in slides, lack of lubrication, overloaded drawer. | Check slide alignment and adjust. Clean slides of any debris. Apply silicone lubricant. Reduce load. |
| Drawer is noisy when opening/closing. | Lack of lubrication, loose mounting screws. | Apply silicone lubricant to slides. Tighten all mounting screws. |
| Drawer feels wobbly or unstable. | Loose mounting screws, uneven installation. | Ensure all mounting screws are securely tightened. Verify that the slides are level and parallel. |
| Drawer does not fully retract. | Obstruction in cabinet, damaged slide. | Check for any items blocking the drawer's path. Inspect slides for damage; replace if necessary. |
9. Disposal Information
When the product reaches the end of its service life, please dispose of it responsibly according to local regulations. The stainless steel components are recyclable. Do not dispose of with general household waste.
10. Warranty & Support
AREBOS products are manufactured with quality and durability in mind. For warranty information or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.
