1. Introduction
The Sovol Solar Turntable is designed to provide a 360° rotating platform for the uniform curing of UV resin 3D prints. This stand utilizes solar or strong artificial light sources (like UV lamps) to power its rotation, ensuring that all surfaces of your 3D printed models receive consistent exposure during the curing process. It is also suitable for displaying small items such as jewelry, mobile phones, watches, and crystal objects.
2. Safety Information
Please read all safety instructions before using the product. Keep this manual for future reference.
- Do not expose the device to extreme temperatures (above 80°C or below -20°C).
- Avoid direct contact with water or other liquids.
- Do not attempt to disassemble or modify the device.
- Ensure the turntable is placed on a stable, flat surface during operation.
- This device is powered by light; it does not require or use batteries for its primary function.
- When using for UV resin curing, always follow safety guidelines for handling UV resin and operating UV light sources. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection.
Image: Product packaging showing safety warnings and manufacturer details. Always adhere to all listed safety precautions.
3. Package Contents
The package includes the following item:
- 1 x Sovol Solar Turntable 360° Rotating Stand
4. Specifications
| Feature | Specification |
|---|---|
| Product Material | ABS |
| Color | Silver |
| Heat Resistance Temperature | 80 °C |
| Cold Resistance Temperature | -20 °C |
| Solar Battery Voltage | 1.2 V |
| Maximum Weight Load | 300g - 500g (0.66 - 1.1 lbs) |
| Maximum Rotation Speed | 4.5 circles/minute |
| Dimensions (L x W x H) | Approx. 10 x 10 x 4.5 cm (3.94 x 3.94 x 1.77 inches) |
| Tray Diameter | Approx. 9 cm (3.5 inches) |
| Item Weight | 110 g |
| Power Source Type | Solar (Light-powered) |
| Batteries Required | No |
| Model Number | XZBDS |
Image: Dimensional diagram of the Sovol Solar Turntable.
5. Setup
- Unpack the Turntable: Carefully remove the solar turntable from its packaging.
- Placement: Place the turntable on a flat, stable surface. Ensure there is sufficient space around it for the items you intend to display or cure.
- Light Source: Position the turntable in an area with adequate light. For UV resin curing, a dedicated UV light source is required. For general display, natural sunlight or strong fluorescent lighting will suffice. The turntable's solar panels (visible on the base) need to be exposed to light to initiate rotation.
- Initial Rotation: If the turntable does not start rotating immediately, gently nudge it to overcome initial inertia. Stronger light will result in faster and more consistent rotation.
Image: The solar turntable positioned next to a UV light source, ready for operation.
Image: Detail of the solar panels on the turntable base, which power the rotation.
6. Operating Instructions
- Place Item: Carefully place the item you wish to rotate (e.g., a 3D print for curing, or a display item) onto the center of the turntable's transparent tray. Ensure the weight does not exceed the maximum load capacity of 500g (1.1 lbs).
- Activate Rotation: Expose the solar panels on the turntable's base to a strong light source. For UV resin curing, this will be your UV curing lamp. For display purposes, natural sunlight or bright indoor lighting is sufficient. The turntable will begin to rotate automatically.
- Monitor Curing (for 3D prints): When curing UV resin prints, ensure the UV light source is positioned to evenly illuminate the rotating object. The 360° rotation helps achieve uniform curing on all sides.
- Stop Rotation: To stop the rotation, remove the turntable from the light source. There is no on/off switch; the device is entirely light-powered.
Image: The solar turntable in operation, rotating a 3D print under a UV light for curing.
Image: Example setup of the turntable within a DIY curing station, demonstrating its use with a UV light.
7. Maintenance
- Cleaning: Wipe the turntable with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the internal components. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the turntable in a cool, dry place away from direct sunlight to prevent unnecessary rotation and potential wear.
- Inspection: Periodically check the turntable for any signs of damage or obstruction that might hinder its rotation.
8. Troubleshooting
- Problem: Turntable does not rotate.
- Solution 1: Ensure the solar panels on the base are exposed to sufficient light. The device requires strong light (natural sunlight, UV lamp, or bright fluorescent light) to operate.
- Solution 2: Check if the item placed on the turntable exceeds the maximum weight load (500g / 1.1 lbs).
- Solution 3: Gently nudge the turntable to overcome initial inertia.
- Solution 4: Ensure there are no obstructions preventing rotation.
- Problem: Rotation is slow or inconsistent.
- Solution 1: Increase the intensity or proximity of the light source to the solar panels. Stronger light results in faster rotation.
- Solution 2: Reduce the weight of the item on the turntable.
- Solution 3: Ensure the turntable is on a perfectly flat surface to prevent friction.
9. Warranty and Support
Sovol is committed to providing quality products. If you encounter any issues with your Solar Turntable, please do not hesitate to contact Sovol customer support. We offer a full refund or replacement for product problems.
For support, please visit the official Sovol website or contact their customer service channels. Refer to your purchase documentation for specific contact details.
