Mcbazel ns-010133

Mcbazel Route Air Wireless Audio Adapter User Manual

Model: ns-010133

Introduction

The Mcbazel Route Air Wireless Audio Adapter is designed to provide wireless audio connectivity for your gaming consoles and PC. This compact adapter allows you to connect Bluetooth headphones to your Nintendo Switch, Switch Lite, PC, or PS4, enhancing your gaming experience with high-quality, low-latency audio. It supports simultaneous connection to two wireless audio devices.

Setup Instructions

Follow these steps to set up your Mcbazel Route Air Wireless Audio Adapter:

  1. For Nintendo Switch Dock Usage: The L-shaped USB adapter is specifically for use with the official Nintendo Switch Dock. For the Switch console itself, only the wireless headphone adapter is needed.
  2. Initial Check: Before connecting the wireless headphone adapter to the Switch console, ensure the volume adjustment bar on the console shows a speaker icon. This indicates that the console is ready for audio output.
  3. Connect Adapter: Connect the wireless headphone adapter to the USB-C port on your Nintendo Switch console.
  4. Simultaneous Connection: Each wireless adapter can connect to two wireless headphones simultaneously, allowing for shared audio experiences.
  5. Channel Setup: Set up connections to Channel A and Channel B accordingly for multiple headphones.
  6. Initiate Pairing (Adapter): Press and hold the pairing button on the wireless adapter for approximately 4 seconds. The adapter's LED light will begin flashing, indicating it is in pairing mode.
  7. Initiate Pairing (Headphone): Now, press the pairing button on your Bluetooth headphone. The location of the pairing button may vary depending on the headphone brand.
  8. Connection Success: Once the connection is successful, the LED light on the wireless adapter will stop flashing and remain solid.
  9. Verify Connection: After the connection is established, the volume adjustment bar on your Switch console will display a USB icon, confirming that audio is being routed through the adapter.
Mcbazel Route Air Wireless Audio Adapter connected to Nintendo Switch console

Image: The Mcbazel Route Air Wireless Audio Adapter connected to the USB-C port of a Nintendo Switch console.

Mcbazel Route Air Wireless Audio Adapter connected to Nintendo Switch dock

Image: The L-shaped USB adapter component connected to a Nintendo Switch dock, with the main adapter unit shown separately.

Video: Official setup guide for the Gulikit Route Air Wireless Audio Adapter for Nintendo Switch, demonstrating connection and pairing steps.

Operating Instructions

Once paired, the adapter will automatically connect to your headphones when both devices are powered on and within range. The adapter provides low-latency audio for an immersive gaming experience.

  • Audio Output: Audio will be routed wirelessly to your connected Bluetooth headphones.
  • Volume Control: Adjust volume directly on your connected headphones or through the console's system settings.
  • Dual Headphone Mode: If two headphones are paired, audio will be transmitted to both simultaneously.
Angled view of Mcbazel Route Air Wireless Audio Adapter on Nintendo Switch

Image: An angled perspective of the Mcbazel Route Air Wireless Audio Adapter seamlessly integrated with a Nintendo Switch console.

Maintenance

To ensure the longevity and optimal performance of your Mcbazel Route Air Wireless Audio Adapter, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the adapter. Avoid using liquid cleaners or abrasive materials.
  • Storage: Store the adapter in a cool, dry place when not in use. Protect it from extreme temperatures and direct sunlight.
  • Handling: Handle the adapter with care. Avoid dropping it or subjecting it to strong impacts.
  • Connectivity Ports: Keep the USB-C port and other connectors free from dust and debris.

Troubleshooting

If you encounter issues with your adapter, refer to the following common solutions:

ProblemSolution
No Audio Output
  • Ensure the adapter is securely connected to the console/dock.
  • Verify that your headphones are powered on and fully charged.
  • Check the volume levels on both your console/PC and headphones.
  • Confirm that the adapter's LED is solid, indicating a successful connection.
Headphones Not Pairing
  • Ensure both the adapter and headphones are in pairing mode (flashing LEDs).
  • If connection times out, repeat steps 6 and 8 from the Setup Instructions.
  • Move the headphones closer to the adapter during pairing.
  • Try resetting both the adapter and headphones to factory settings if possible.
Intermittent Connection / Audio Drops
  • Ensure there are no obstructions between the adapter and headphones.
  • Reduce the distance between the adapter and headphones.
  • Minimize interference from other wireless devices.
  • Ensure the adapter is fully inserted into the USB-C port.
Incorrect Audio Icon on Switch
  • If a speaker icon is shown instead of a USB icon after connection, try re-inserting the adapter or restarting the console.

Specifications

  • Model Number: ns-010133
  • Product Dimensions: 1.18 x 3.15 x 3.15 inches
  • Item Weight: 1.48 ounces (0.04 Kilograms)
  • Connector Type: USB Type C
  • Compatible Devices: Nintendo Switch, Switch Lite, PC, PS4
  • Manufacturer: Mcbazel
  • First Available Date: January 11, 2020

Warranty and Support

Mcbazel products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or contact Mcbazel customer support. Keep your proof of purchase for warranty claims.

For further assistance or technical support, please visit the official Mcbazel website or contact their customer service department.

© 2024 Mcbazel. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.