Introduction
This manual provides instructions for the safe and efficient use of your Sylvania 60798 1.5W Selectable RGB LED Night Light. Please read these instructions carefully before use and retain them for future reference.
Image: Front view of the Sylvania 60798 RGB LED Night Light, showing its circular design and central control button.
Setup
- Unpack: Carefully remove the night light from its packaging.
- Placement: Select a standard wall outlet in a location where ambient light is desired. Ensure the outlet is easily accessible.
- Plug In: Insert the night light directly into the wall outlet. The device is designed for indoor use only.
The night light features an automatic dusk-to-dawn sensor, meaning it will only activate when the surrounding area is dark. It also includes a motion sensor to detect movement.
Image: The Sylvania 60798 night light plugged into a standard wall outlet, illuminating the surrounding area with white light.
Operating Instructions
The Sylvania 60798 night light features a central button for controlling its functions. This 4-in-1 button allows for various lighting modes:
Image: A detailed view of the night light's central control button, showing icons for color selection, dimming, and white light mode.
- Cool White Light (4000K): Press the button to activate the cool white light mode.
- Dimmable Function: While in cool white light mode, press and hold the button to adjust brightness from 1 to 12 lumens. Release the button when the desired brightness is reached.
- Selectable RGB Colors: Press the button again to cycle through various static RGB colors. Each press will advance to the next color.
- RGB Cycling Mode: After cycling through static colors, press the button one more time to activate a continuous RGB color cycling mode.
The night light will remember the last selected setting when it turns off and on again (e.g., due to dusk-to-dawn sensor or power cycle).
Image: The night light displaying a red color output.
Image: The night light displaying a green color output.
Maintenance
The Sylvania 60798 LED Night Light requires minimal maintenance.
- Cleaning: Disconnect the night light from the power outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
- LED Lifetime: The integrated LED has an estimated lifetime of 20,000 hours and is not user-replaceable.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Night light does not turn on. | No power to the outlet. Room is too bright (dusk-to-dawn sensor). | Check the power outlet with another device. Ensure the room is sufficiently dark for the sensor to activate. |
| Light does not change color or dim. | Incorrect button operation. | Refer to the 'Operating Instructions' section for correct button presses for color selection and dimming. |
| Motion sensor not responding. | Obstruction in sensor's view. Motion is outside detection range. | Ensure the sensor is not blocked. Test motion within close proximity to the night light. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 60798 |
| Power Consumption | 1.5W (less than 1W for energy savings) |
| Light Source | Integrated LED |
| LED Lifetime | 20,000 hours |
| Brightness | Dimmable (1-12 Lumens) |
| Color Temperature | 4000K (Cool White) |
| Color Options | Selectable RGB, RGB Cycling |
| Special Features | Dusk-to-Dawn Sensor, Motion Sensor |
| Switch Type | Push Button, Touch |
| Material | Plastic |
| Dimensions (Approx.) | 25.2 x 13.6 x 4 cm (Package Dimensions) |
Warranty and Support
For warranty information, please refer to the documentation included with your product packaging or visit the official SYLVANIA website. For technical support or inquiries, please contact SYLVANIA customer service through their official channels.
