Timex Women's Ironman Triathlon Transit 33mm Resin Strap Watch

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Timex Women's Ironman Triathlon Transit 33mm Resin Strap Watch. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your timepiece.

Front view of the Timex Women's Ironman Triathlon Transit watch, showcasing its digital display and overall design.

Key Features

• Adjustable pink 12mm resin strap designed to fit wrist circumferences up to 7.5 inches.
• 100-hour chronograph with 10-lap memory for tracking performance.
• 24-hour countdown timer for various activities.
• Customizable alarm function.
• 24-hour military time mode.
• Dual time zones for convenience when traveling.
• Day, date, and month calendar display.
• Pink 33mm resin case with a rose gold-tone top ring and acrylic lens.
• Gray digital display.
• Indiglo light-up watch dial for low-light conditions.
• Water-resistant to 100 meters (330 feet), suitable for snorkeling and swimming.

Setup Instructions

Setting Time and Date

1. Press and hold the SET/RECALL button until the time display begins to flash.
2. Press the START/SPLIT button to advance the flashing digit.
3. Press the MODE button to move to the next setting (e.g., minutes, hour, 12/24-hour format, month, date, year).
4. Repeat steps 2 and 3 until all desired settings are adjusted.
5. Press SET/RECALL again to exit setting mode.

Setting the Alarm

1. From time display mode, press the MODE button repeatedly until the alarm icon (bell symbol) appears.
2. Press and hold the SET/RECALL button until the alarm time flashes.
3. Use the START/SPLIT button to adjust the flashing digit.
4. Press the MODE button to move between hours and minutes.
5. Press SET/RECALL to save the alarm time.
6. To activate/deactivate the alarm, press the START/SPLIT button while in alarm mode. An alarm icon will indicate activation.

Operating Modes

Chronograph (Stopwatch)

The chronograph measures elapsed time. It features a 10-lap memory.

1. Press the MODE button until the chronograph display appears (often indicated by 'CHR' or a stopwatch icon).
2. Press START/SPLIT to begin timing.
3. Press START/SPLIT again to record a lap time (the main timer continues running).
4. Press STOP/RESET to pause the chronograph.
5. Press STOP/RESET again to reset the chronograph to zero.
6. To recall lap times, press SET/RECALL while the chronograph is stopped.

Countdown Timer

The 24-hour countdown timer can be used for various timed events.

1. Press the MODE button until the countdown timer display appears (often indicated by 'TMR' or a timer icon).
2. Press and hold SET/RECALL to set the desired countdown time. Use START/SPLIT to adjust digits and MODE to move between hours, minutes, and seconds.
3. Press SET/RECALL to save the set time.
4. Press START/SPLIT to begin the countdown.
5. Press STOP/RESET to pause or resume the countdown.
6. When the timer reaches zero, an audible alert will sound. Press any button to stop the alert.

Indiglo Night-Light

The Indiglo feature illuminates the watch dial for easy viewing in low-light conditions.

• Press the INDIGLO button (usually located on the top right or left side of the watch case) to activate the backlight.
• The light will remain on for a few seconds.

Maintenance

Battery Replacement

The watch uses one Lithium Metal battery (included). When the display dims or functions become erratic, it may be time to replace the battery. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.

Rear view of the watch, illustrating the stainless steel case back where the battery is housed.

Cleaning Your Watch

To clean your watch, use a soft, damp cloth. For resin straps, mild soap and water can be used. Avoid harsh chemicals or abrasive materials that could damage the watch case or strap. Ensure the watch is dry before storing.

Water Resistance

Your watch is water-resistant to 100 meters (330 feet). This means it is suitable for recreational swimming and snorkeling. It is not suitable for diving. To maintain water resistance, do not press any buttons while the watch is submerged in water.

Timex water resistance guide, detailing suitable activities for various depth ratings.

Troubleshooting

• Watch display is blank or dim: The battery may need replacement. Refer to the Battery Replacement section.
• Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable) or that it is not submerged in water. If the issue persists, a battery replacement might be necessary.
• Time is incorrect: Follow the 'Setting Time and Date' instructions to reset the time.
• Water inside the watch: If moisture appears inside the watch, cease use immediately and consult a qualified watch technician.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the official Timex website or contact Timex customer service directly. Keep your proof of purchase for any warranty claims.

Official Timex Website: www.timex.com