Introduction
This manual provides comprehensive instructions for the safe and effective use of your RovyVon Aurora A8 G4 Keychain Flashlight. This compact and versatile EDC (Everyday Carry) flashlight features a 5000K High CRI main light with 420 lumens maximum output, USB-C recharging, and multiple sidelight functions including 365nm UV, red, and warm white modes. Please read this manual thoroughly before operation.
Setup
1. Initial Unlock
Upon first use, the flashlight is in lock mode to prevent accidental activation during shipping. To unlock, rapidly click the button five (5) times. The main light will flash twice to indicate it is unlocked.
2. Attaching the Magnetic Tail Base and Pocket Clip
The Aurora A8 G4 comes with a magnetic tail base and a two-way magnetic pocket clip for versatile attachment options. The magnetic tail base can be attached to the rear of the flashlight, allowing it to stand upright or adhere to metal surfaces. The pocket clip can be attached to the body of the flashlight for carrying in a pocket or clipping to a hat brim for hands-free illumination.
Figure 1: Magnetic tail base buckle attached to the flashlight. This allows the flashlight to be secured to metal surfaces for hands-free operation.
Figure 2: The magnetic two-way pocket clip provides flexible carrying and attachment options, including hands-free use on metal surfaces or as a headlamp when clipped to a cap.
Video 1: Demonstrates the attachment of the magnetic base and two-way clip, showcasing how these accessories enable hands-free use by adhering to metal surfaces or clipping to a cap.
3. Charging the Battery
The Aurora A8 G4 is equipped with a 330mAh Li-poly battery and supports USB-C charging. Connect a USB-C cable (not included) to the charging port on the flashlight. The charging indicator light will show the charging status. A green light indicates a full charge.
Figure 3: The flashlight connected to a USB-C charging cable. The green indicator light signifies that the battery is fully charged.
Operating Instructions
1. Main Light Operation
- Momentary On: Long press the button to activate the main light momentarily. Release to turn off.
- Constant On/Brightness Cycle: Double-click the button to turn on the main light. Subsequent single clicks will cycle through Moonlight, Low, Medium, and High brightness modes.
- Turn Off: Long press the button while the main light is on, or single-click after cycling through all modes.
2. Sidelight Operation
- Activate Sidelights: Triple-click the button to turn on the sidelights.
- Cycle Sidelight Modes: Once sidelights are active, single-click the button to cycle through the available modes: 365nm UV, Red, Red Flash, Red Beacon, Warm White (Low), Warm White (High).
- Turn Off: Long press the button while the sidelights are on, or single-click after cycling through all modes.
Figure 4: The 365nm UV sidelight can be used for detecting counterfeit banknotes or other UV-reactive materials.
Figure 5: The red sidelight offers multiple modes, including constant red, red flash, and red beacon, useful for signaling or preserving night vision.
Video 2: Illustrates the various sidelight functions, including UV, red, and warm white modes, and demonstrates the magnetic clip's utility for hands-free lighting.
3. Lock/Unlock Function
- Lock: Rapidly click the button five (5) times to lock the flashlight. The main light will flash once to confirm.
- Unlock: Rapidly click the button five (5) times again to unlock. The main light will flash twice to confirm.
Video 3: Shows the main light operation (momentary, constant on, brightness cycle) and the lock/unlock sequence for the flashlight.
Maintenance
- Cleaning: Regularly wipe the flashlight body with a soft, damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive materials.
- Battery Care: To prolong battery life, recharge the flashlight regularly, especially if it has not been used for an extended period. Avoid fully discharging the battery frequently.
- USB-C Port: Keep the USB-C charging port clean and free of dust or moisture. Ensure the port cover is properly sealed when not charging to prevent ingress of water or debris.
Specifications
| Brand | RovyVon |
| Model | Aurora A8 G4 |
| Special Feature | Rechargeable |
| Power Source | Battery Powered (330mAh Lithium Polymer) |
| Light Source Type | LED (5000K, High CRI) |
| White Brightness | 420 Lumens (Max) |
| Auxiliary Side LEDs | UV (365nm), Red, Warm White, Amber |
| Material | Polycarbonate |
| Product Dimensions | 2.38"D x 0.61"W x 0.61"H |
| Item Weight | 0.15 Pounds (2.4 ounces) |
| Water Resistance Level | Not Water Resistant |
| Included Components | Battery, Magnetic Clip & Base |
Figure 6: Explanation of Color Rendering Index (CRI), indicating that a higher CRI (like >90) means the light source reproduces colors more accurately.
Figure 7: Illustration showing the benefit of 5000K color temperature light for improved target recognition in foggy or rainy conditions compared to cooler white light.
Troubleshooting
- Flashlight Not Turning On:
- Ensure the flashlight is unlocked (rapidly click 5 times).
- Check battery charge level. Recharge if necessary.
- Flashlight Not Charging:
- Verify the USB-C cable is properly connected to both the flashlight and a power source.
- Try a different USB-C cable or power adapter.
- Ensure the charging port is clean and free of debris.
- Reduced Brightness or Runtime:
- The battery may be low. Recharge the flashlight.
- High brightness modes will automatically step down to prevent overheating and protect the battery. This is normal operation.
If you encounter issues not covered here, please refer to the support section for assistance.
Warranty and Support
RovyVon products are designed for durability and performance. For warranty information or technical support, please visit the official RovyVon website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, please visit: RovyVon Official Store
