EVGA GeForce RTX 2060 KO Gaming Graphics Card User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your EVGA GeForce RTX 2060 KO Gaming graphics card. This high-performance graphics card is designed to deliver exceptional gaming realism and efficiency, powered by the NVIDIA Turing architecture.

Figure 1: Front view of the EVGA GeForce RTX 2060 KO Gaming graphics card, showcasing its dual fans.

2. What's in the Box

Verify that all items listed below are included in your product packaging:

• EVGA GeForce RTX 2060 KO Gaming Graphics Card
• Instruction Manual

3. Key Features

The EVGA GeForce RTX 2060 KO Gaming graphics card offers the following features:

• Real Boost Clock: 1680 MHz
• Memory Detail: 6144 MB GDDR6
• Real-Time ray tracing for hyper-realistic graphics
• Dual fans for high-performance cooling and reduced acoustic noise
• Built for EVGA Precision X1 software
• All-metal backplate, pre-installed

Figure 2: Rear view of the graphics card, highlighting the pre-installed all-metal backplate for enhanced durability and cooling.

4. Specifications

Detailed technical specifications for the EVGA GeForce RTX 2060 KO Gaming graphics card:

5. Setup & Installation

Follow these steps to properly install your EVGA GeForce RTX 2060 KO Gaming graphics card into your computer system.

5.1 Pre-Installation Checklist

• Ensure your power supply meets the minimum wattage requirements for the RTX 2060.
• Turn off your computer and unplug all power cables.
• Ground yourself to prevent electrostatic discharge (ESD) damage.
• Open your computer case.

5.2 Installing the Graphics Card

1. Locate an available PCI-Express x16 slot on your motherboard.
2. Remove any expansion slot covers from your computer case that correspond to the chosen PCI-Express slot.
3. Carefully align the graphics card with the PCI-Express slot.
4. Press down firmly on both ends of the graphics card until it is securely seated in the slot. You should hear a click as the retention clip engages.
5. Secure the graphics card to the computer case using the screws from the expansion slot covers.
6. Connect the required 8-pin PCIe power connector from your power supply to the graphics card.
7. Close your computer case and reconnect all power cables.

Figure 3: Display output ports on the graphics card, including DisplayPort, HDMI, and DVI for connecting to monitors.

5.3 Driver Installation

After physical installation, power on your computer. You will need to install the latest NVIDIA drivers for your graphics card. These can be downloaded from the official NVIDIA website (www.nvidia.com/drivers) or through the EVGA Precision X1 software.

6. Operating Instructions

Once the drivers are installed, your graphics card is ready for use. For optimal performance and customization, consider installing EVGA Precision X1 software.

6.1 EVGA Precision X1 Software

EVGA Precision X1 allows you to monitor your graphics card's performance, adjust fan curves, and fine-tune settings for overclocking. Download the latest version from the official EVGA website (www.evga.com/precisionx1/).

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your graphics card.

• Cleaning: Periodically clean dust from the fans and heatsink using compressed air. Ensure the computer is powered off and unplugged before cleaning.
• Driver Updates: Keep your graphics drivers updated to the latest version for performance improvements and bug fixes.
• System Airflow: Ensure good airflow within your computer case to prevent overheating.

8. Troubleshooting

If you encounter issues with your graphics card, consider the following common solutions:

• No Display:
  • Ensure the graphics card is fully seated in the PCI-Express slot.
  • Verify all power connectors (including the 8-pin PCIe) are securely attached.
  • Check that your monitor cable is connected to the graphics card, not the motherboard's integrated graphics port.
• Driver Issues:
  • Perform a clean installation of the latest graphics drivers.
  • Uninstall any old graphics drivers before installing new ones.
• Overheating:
  • Ensure proper case airflow and clean any dust from the card's fans and heatsink.
  • Monitor temperatures using EVGA Precision X1 or similar software.

9. Warranty & Support

Your EVGA GeForce RTX 2060 KO Gaming graphics card comes with a 3-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official EVGA website or contact their customer service.

EVGA Official Website: www.evga.com

EVGA Store: Visit the EVGA Store on Amazon