Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your President Taylor FCC 12/24V CB Radio. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
The President Taylor FCC 12/24V CB Radio is a compact and feature-rich communication device designed for reliable performance. It operates on both 12V and 24V power systems, making it suitable for a wide range of vehicles.
Image: Front view of the President Taylor FCC 12/24V CB Radio, showing the main unit and attached microphone.
Key Features
- 12/24V Compatibility: Designed to operate seamlessly with both 12V and 24V vehicle electrical systems.
- USB Charging Socket: Conveniently located USB port for charging external devices.
- 7 Color LCD Display: Customizable LCD display with seven color options for enhanced visibility.
- Dynamic/Electret Mic Compatible: Supports various microphone types for user preference.
- Beeping SWR Meter: Integrated Standing Wave Ratio (SWR) meter with an audible alert for optimal antenna tuning.
- PA Function: Public Address capability for external broadcasting.
- Talkback: Allows monitoring of your own voice during transmission.
- Noise Filters (Hi-Cut/ANL/NB): Noise reduction features including High-Cut, Automatic Noise Limiter (ANL), and Noise Blanker (NB) for clearer reception.
- Scan Function: Automatically scans through channels to find active transmissions.
- VOX: Voice-operated transmit function for hands-free operation.
Setup and Installation
Package Contents:
Your President Taylor FCC 12/24V CB Radio package includes:
- President Taylor FCC 12/24V CB Radio Unit
- Microphone with Front Microphone Plug
- Mounting Bracket and Hardware
- Power Cable
- Instruction Manual
Mounting the Radio:
- Choose a secure and accessible location in your vehicle, ensuring it does not obstruct your view or interfere with driving.
- Use the provided mounting bracket as a template to mark drilling locations.
- Drill pilot holes and secure the mounting bracket using the supplied screws.
- Attach the radio to the mounting bracket.
Power Connection:
- Connect the red wire of the power cable to a positive (+) 12V or 24V DC power source in your vehicle.
- Connect the black wire of the power cable to a negative (-) ground point on your vehicle chassis.
- Ensure all connections are secure and properly insulated to prevent short circuits.
Antenna Connection:
Connect a properly tuned CB antenna (not included) to the antenna connector on the rear of the radio. An SWR meter is built-in to assist with tuning.
Microphone Connection:
Plug the microphone into the front microphone jack on the radio unit.
Image: Detailed view of the front panel controls and connections of the President Taylor FCC 12/24V CB Radio.
Operating Instructions
Basic Operation:
- Power On/Off: Turn the Volume/Squelch knob clockwise to power on the radio. Turn counter-clockwise until it clicks to power off.
- Volume Control: Adjust the Volume/Squelch knob to your desired listening level.
- Squelch Control: Rotate the Volume/Squelch knob (inner ring) to eliminate background noise when no signal is present. Adjust until the noise disappears.
- Channel Selection: Use the Channel Up/Down buttons or rotary knob to select your desired CB channel (1-40).
- Transmit (TX): Press and hold the PTT (Push-To-Talk) button on the microphone to transmit. Release to receive.
Advanced Features:
- 7 Color LCD Display: Access the menu to customize the backlight color of the LCD display.
- USB Charging Socket: Plug in your USB-powered devices to the 5V 2.1A USB port for charging.
- PA Function: Connect an external loudspeaker to the PA jack (usually on the rear) and switch to PA mode to use the radio as a public address system.
- Talkback: Activate the Talkback feature (if available via a dedicated button or menu) to monitor your own voice through the radio's speaker during transmission.
- Noise Filters (Hi-Cut/ANL/NB): Engage these filters via dedicated buttons or menu options to reduce various types of interference and improve audio clarity.
- Scan: Press the Scan button to automatically cycle through active channels. Press again to stop scanning.
- VOX: Enable VOX mode (Voice Operated Transmit) to transmit by speaking into the microphone without pressing the PTT button. Adjust VOX sensitivity as needed.
- Weather Channels (WX): Access dedicated weather channels for local weather alerts and forecasts.
Video: This video demonstrates various product features of a President CB radio, including noise reduction, weather channels, and hands-free communication. While it features a different model (Bill III), many functionalities are similar to the Taylor FCC model.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the exterior of the radio. Avoid abrasive cleaners or solvents.
- Connections: Periodically check all cable connections (power, antenna, microphone) to ensure they are secure and free from corrosion.
- Antenna Tuning: Regularly check your SWR using the built-in meter to ensure optimal antenna performance and prevent damage to the radio.
- Storage: If storing the radio for an extended period, disconnect it from power and store it in a dry, cool place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Loose power connection, blown fuse, vehicle power issue. | Check power cable connections. Inspect and replace fuse if blown. Verify vehicle's power source. |
| No Reception/Poor Reception | Antenna not connected, improperly tuned antenna, squelch set too high, local interference. | Ensure antenna is connected. Check SWR and tune antenna. Lower squelch level. Activate ANL/NB filters. |
| Cannot Transmit | Microphone not connected, faulty microphone, radio in PA mode. | Check microphone connection. Ensure radio is in CB mode, not PA. Test with another microphone if possible. |
| Display Issues (e.g., fading in heat) | Exposure to extreme heat or direct sunlight. | Relocate the radio to an area not exposed to direct sunlight or excessive heat. Allow unit to cool down. |
Specifications
- Model: TAYLOR FCC - 12/24V
- Dimensions (W x D x H): 5.90" x 6.49" x 1.77"
- Weight: 1.65 pounds
- Number of Channels: 40
- Frequency Range: 26.965 MHz - 27.405 MHz
- Voltage: 12V / 24V
- Talking Range Maximum: 30 Miles
- Special Features: Automatic SWR meter, 7 Color LCD Display, USB Charging Socket, Dynamic/Electret Mic Compatible, PA, Talkback, Hi-Cut/ANL/NB Filters, Scan, VOX.
- Water Resistance Level: Water Resistant
Warranty and Support
President products are designed for durability and performance. For warranty information, please refer to the warranty card included in your product packaging or visit the official President Electronics USA website. For technical support, contact President customer service through their official channels.
Online Resources:
