Givi HX23FPTBT61 Motorcycle Helmet User Manual

1. Introduction

Thank you for choosing the Givi HX23FPTBT61 flip-up motorcycle helmet. This manual provides essential information for the correct use, maintenance, and care of your helmet. Please read it carefully before using the helmet and keep it for future reference. Your safety is paramount.

The Givi HX23FPTBT61 is a high-quality flip-up helmet designed for motorcycle riders, offering versatility and protection. It features a durable Acrylonitrile Butadiene Styrene (ABS) outer shell and is an original product manufactured in Italy.

2. Safety Information

Always prioritize safety when riding. A helmet is a critical piece of safety equipment. Follow these guidelines:

• Proper Fit: Ensure the helmet fits snugly and comfortably. It should not move freely on your head.
• Chin Strap: Always fasten the chin strap securely. It should be tight enough so that the helmet cannot be pulled off your head.
• Visor Use: Keep the main visor closed while riding to protect your eyes from wind, debris, and insects. Use the internal sun visor for glare reduction as needed.
• Impact Protection: Helmets are designed for a single impact. If your helmet sustains an impact, even if it appears undamaged, it should be replaced immediately.
• Chemicals: Avoid contact with gasoline, cleaning fluids, paints, or other solvents, as they can damage the helmet's materials and compromise its protective capabilities.
• Visibility: Ensure your visor is clean and free from scratches to maintain clear visibility.

3. Product Overview

The Givi HX23FPTBT61 is a versatile flip-up helmet, also known as a modular helmet, offering the convenience of an open-face helmet with the protection of a full-face helmet. It features a robust outer shell made from Acrylonitrile Butadiene Styrene (ABS).

Key Features:

• Type: Flip-up (Modular)
• Outer Material: Acrylonitrile Butadiene Styrene (ABS)
• Model Name: MANN
• Origin: Original product manufactured in Italy

Front-side view of the Givi HX23FPTBT61 helmet with the chin bar closed, showing the main visor and internal sun visor.

Side view of the Givi HX23FPTBT61 helmet with the chin bar in the open position, revealing the internal sun visor.

Front view of the Givi HX23FPTBT61 helmet, highlighting the main visor and ventilation system.

Top-rear view of the Givi HX23FPTBT61 helmet, showing the rear spoiler and ventilation outlets.

Rear view of the Givi HX23FPTBT61 helmet, displaying the Givi logo and model designation.

Side view of the Givi HX23FPTBT61 helmet with the main visor closed, showing the overall profile.

Opposite side view of the Givi HX23FPTBT61 helmet, detailing the visor mechanism.

Interior view of the Givi HX23FPTBT61 helmet, showing the comfortable padding and chin strap.

4. Setup

4.1 Initial Fitting

1. Choose Correct Size: Ensure you have selected the correct helmet size (e.g., XL as per product specifications). A helmet should fit snugly around your head without causing pressure points.
2. Put On Helmet: Hold the chin straps apart and pull the helmet over your head. It should feel tight but comfortable.
3. Check Fit: Once on, try to move the helmet from side to side and up and down. Your skin should move with the helmet. If the helmet slides independently, it is too large.

4.2 Chin Strap Adjustment

1. Fasten Strap: Secure the chin strap buckle.
2. Adjust Length: Tighten the strap until it is snug under your chin. You should be able to fit one finger between the strap and your chin, but no more.
3. Test Security: With the strap fastened, try to roll the helmet off your head from the back. If it comes off, the strap is too loose or the helmet is too large.

4.3 Visor Installation/Removal

Refer to the specific mechanism on your Givi HX23FPTBT61 helmet for visor removal and installation. Typically, this involves pressing a release button or lever near the visor pivot point and sliding the visor out. Reverse the process for installation, ensuring the visor clicks securely into place on both sides.

5. Operating Instructions

5.1 Operating the Flip-Up Mechanism

1. To Open: Locate the release button or lever, usually at the center of the chin bar. Press or pull this mechanism and lift the chin bar upwards until it locks into the open position.
2. To Close: Press the release button/lever again (if required) or simply pull the chin bar down firmly until it clicks and locks into the closed, full-face position. Ensure it is fully latched before riding.

5.2 Internal Sun Visor Operation

Your helmet is equipped with an internal sun visor. Locate the slider or lever on the side of the helmet (typically on the left). Slide it forward or backward to deploy or retract the sun visor as needed to reduce glare. Do not use the sun visor in low light conditions or at night.

5.3 Ventilation System

The helmet features adjustable vents for airflow. Locate the vents on the chin bar and top of the helmet. Slide or click the vent covers to open or close them, allowing you to control the amount of air circulation inside the helmet for comfort.

6. Maintenance

6.1 Cleaning the Helmet Shell

• Use a soft cloth dampened with mild soap and water.
• Avoid abrasive cleaners, solvents, or harsh chemicals, as they can damage the helmet's finish and material.
• Rinse thoroughly with clean water and air dry.

6.2 Cleaning the Visor

• Remove the visor from the helmet.
• Wash with lukewarm water and a soft cloth. A small amount of mild soap can be used if necessary.
• Rinse thoroughly and allow to air dry. Do not wipe dry, as this can cause scratches.
• Do not use chemical cleaners or abrasive materials on the visor.

6.3 Cleaning/Removing Interior Padding

The interior padding of your Givi helmet is typically removable for cleaning. Gently detach the padding components (cheek pads, crown liner) by unsnapping or unhooking them. Hand wash the padding with mild soap and lukewarm water. Rinse thoroughly and allow to air dry completely before re-installing. Do not machine wash or tumble dry.

6.4 Storage

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from chemicals and solvents. Use a helmet bag to protect it from dust and scratches.

7. Troubleshooting

• Visor Fogging: Ensure ventilation vents are open. Consider using an anti-fog insert or spray if available for your visor.
• Loose Chin Strap: Re-adjust the chin strap as described in Section 4.2. If the buckle is damaged, discontinue use and seek professional repair or replacement.
• Chin Bar Not Latching: Ensure no debris is obstructing the latching mechanism. Apply gentle, even pressure when closing. If the mechanism is damaged, do not use the helmet in the closed position.
• Excessive Noise: Check that all vents and visors are fully closed. Ensure the helmet fits correctly.

For issues not covered here, please contact Givi customer support or an authorized dealer.

8. Specifications

9. Warranty and Support

For warranty information, claims, or technical support regarding your Givi HX23FPTBT61 helmet, please refer to the warranty card included with your purchase or visit the official Givi website. You may also contact the retailer from whom you purchased the helmet for assistance.