1. Introduction
The Bell+Howell Tacshaver is a compact and versatile 2-in-1 rotary shaver and trimmer designed for men. It offers the convenience of an electric shaver with the ability to be used wet or dry. Its micro-technology design makes it highly portable, suitable for both home use and travel. The device features multi-directional stainless steel rotary heads for efficient shaving and an integrated pop-up trimmer for detailing.
Image 1.1: Bell+Howell Tacshaver 3D Rechargeable Rotary Shaver and its retail packaging.
2. Safety Information
- Avoid using the shaver near water while charging to prevent electrical hazards.
- Keep the device out of reach of children.
- Do not disassemble or attempt to repair the shaver yourself. Contact qualified personnel for service.
- Ensure the USB cable is not damaged before charging.
- Do not expose the shaver to extreme temperatures or direct sunlight.
3. Package Contents
The Bell+Howell Tacshaver package typically includes the following items:
- Bell+Howell Tacshaver Unit
- Storage Pouch
- Cleaning Brush
- USB Cable (for recharging)
4. Product Features
- Rechargeable: Cordless operation for convenience.
- Compact Design: Smaller than a credit card (2"W x 3-1/2"L) for portability.
- Waterproof: Suitable for wet or dry shaving, including use in the shower or underwater.
- Stainless Steel Blades: Durable and effective cutting elements.
- Multi-directional Rotary Heads: Three rotary heads adapt to facial contours for a smooth shave.
- Pop-up Trimmer: Integrated trimmer for precise styling of sideburns, moustaches, and beards.
Image 4.1: Key features of the Bell+Howell Tacshaver.
Image 4.2: The shaver is rechargeable and waterproof for versatile use.
Image 4.3: The shaver features three powerful rotary heads for an effective shave.
5. Setup
5.1 Initial Charging
- Connect the provided USB cable to the charging port on the shaver.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer, wall adapter).
- Allow the shaver to charge fully before its first use. The charging indicator (if present) will typically show when charging is complete.
5.2 Battery Installation (if applicable)
The Bell+Howell Tacshaver is rechargeable and does not require separate battery installation for its primary function. However, some models may use AA batteries for specific features or as a backup. Refer to the product's physical markings for battery type if replacement is needed.
6. Operating Instructions
6.1 Shaving
- Ensure the shaver is fully charged.
- Press the power button to turn on the shaver.
- For optimal results, hold the shaver at a right angle to your skin and move it in small, circular motions against the direction of hair growth.
- The shaver can be used for dry shaving or with shaving gel/foam for a wet shave.
- After shaving, press the power button to turn off the shaver.
Image 6.1: Proper technique for using the Bell+Howell Tacshaver.
Image 6.2: The shaver supports both wet and dry shaving methods.
6.2 Using the Pop-up Trimmer
- Locate the pop-up trimmer switch on the side of the shaver.
- Slide the switch upwards to engage the trimmer.
- Use the trimmer for precise edging of sideburns, moustaches, and beard lines.
- Once finished, slide the switch downwards to retract the trimmer.
Image 6.3: The integrated pop-up trimmer for detailing.
6.3 Official Product Video
Video 6.4: Official product overview of the Bell+Howell Tacshaver, demonstrating its features and use.
7. Maintenance
7.1 Cleaning the Shaver
- Turn off the shaver and disconnect it from any power source.
- Gently remove the shaver head assembly.
- Use the provided cleaning brush to remove any accumulated hair from the blades and the shaver body.
- For a more thorough clean, the shaver head can be rinsed under running water due to its waterproof design. Ensure it is completely dry before reattaching.
- Reattach the shaver head assembly securely.
7.2 Blade Replacement
Over time, shaver blades may dull and require replacement for optimal performance. The Bell+Howell Tacshaver uses HQ56 model replacement blades. To replace:
- Turn off the shaver and remove the head assembly.
- Carefully remove the old blades from the head.
- Insert new HQ56 replacement blades, ensuring they are correctly seated.
- Reattach the shaver head assembly.
8. Troubleshooting
- Shaver not turning on: Ensure the shaver is fully charged. Check the power button for proper engagement.
- Poor shaving performance: Clean the shaver heads and blades thoroughly. Consider replacing the blades if they are dull. Ensure the shaver is fully charged.
- Irritation during shaving: Ensure blades are clean and sharp. Try using a wet shave with foam or gel. Shave in the direction of hair growth if irritation persists.
- Charging issues: Verify the USB cable is securely connected to both the shaver and the power source. Try a different USB cable or power source.
9. Specifications
| Feature | Detail |
|---|---|
| Type | 2 in 1 Shaver & Trimmer |
| Head Type | Rotary |
| Head Count | 3 |
| Dimensions | 2"W x 3-1/2"L |
| Materials | ABS Plastic & Stainless Steel |
| Battery Type | Rechargeable |
| USB Cable Size | 39" L |
| Model Number | 2839 |
| UPC | 080313028397 |
10. Warranty and Support
For warranty information, product support, or to purchase replacement parts, please refer to the contact information provided with your product packaging or visit the official Bell+Howell website. Keep your proof of purchase for any warranty claims.
