Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Intex Greywood Prism Frame Above Ground Swimming Pool Set. Designed for outdoor use, this premium pool offers a durable and enjoyable swimming experience for your family. Please read all instructions carefully before assembly and use to ensure safety and optimal performance.
Image: A family enjoying the Intex Greywood Prism Frame Pool, showcasing its spacious design and woodgrain exterior in a backyard setting.
Included Components
Your Intex Greywood Prism Frame Pool Set includes the following components:
- Premium 15-foot by 48-inch round pool liner with sophisticated woodgrain exterior.
- Durable steel frame components with innovative T-joints for easy, tool-free assembly.
- Intex model 28637EG Krystal Clear cartridge filter pump with a pump flow rate of 1,000 gallons per hour.
- Removable pool ladder for safe entry and exit.
- Ground cloth for added protection to the pool bottom.
- Pool cover to keep debris out when not in use.
Image: The complete Intex Greywood Prism Frame Pool Set, including the pool, ladder, filter pump, ground cloth, and pool cover, laid out on a white background.
Setup Instructions
1. Site Preparation
Select a firm, level area for your pool. Ensure the ground is free of sharp objects, debris, and is as level as possible to prevent structural issues and uneven water distribution. A perfectly level surface is crucial for the longevity and safety of the pool.
2. Ground Cloth Placement
Unfold the included ground cloth and lay it flat on your prepared site. This provides an additional layer of protection for the pool liner from punctures and abrasions.
3. Liner Placement and Frame Assembly
Carefully unfold the pool liner and spread it evenly over the ground cloth. Begin assembling the steel frame by inserting the horizontal beams through the liner sleeves. The innovative T-joints allow for tool-free connection of the vertical and horizontal frame components, enhancing strength and durability.
Image: A close-up of the innovative T-Joint and galvanized steel frames, highlighting their tool-free assembly and rust-resistant properties.
Image: The Intex Prism Frame Pool Set in a backyard, with an overlay indicating "45 min. setup", demonstrating the ease of assembly.
4. Filling the Pool
Once the frame is fully assembled and the liner is smooth, begin filling the pool with water. The pool has a water capacity of approximately 4,440 gallons (when 90% full). As the water level rises, smooth out any wrinkles in the bottom of the liner from the center outwards.
5. Filter Pump Setup
Connect the Krystal Clear cartridge filter pump (model 28637EG) to the designated inlet and outlet ports on the pool liner. This pump has a flow rate of 1,000 GPH and features Hydro Aeration Technology for improved circulation, filtration, and water clarity. Follow the pump's specific instructions for cartridge installation and initial operation.
Image: A detailed view of the Krystal Clear Cartridge Filter Pump C1000, highlighting its 1000 GPH pump flow rate and Hydro Aeration Technology for improved water quality.
6. Ladder Assembly
Assemble the removable ladder according to its separate instructions. Ensure all connections are secure before placing it against the pool wall. The ladder is designed for safe and easy access to and from the pool.
Image: A removable pool ladder with slip-resistant steps and a coated corrosion-resistant steel frame, designed for safe use with the Intex pool.
Setup Video Overview
Video: An official product video from Intex demonstrating the setup process for the Prism Frame Greywood pool. This video provides a visual guide to preparing the site, assembling the frame, and connecting the pump system.
Operating Instructions
1. Water Chemistry
Maintain proper water chemistry by regularly testing pH and chlorine levels. Follow recommended guidelines for adding chemicals to ensure safe and clean swimming water. Consult a local pool supply store for specific chemical recommendations and dosage instructions.
2. Filter Operation
Operate the filter pump daily to ensure proper water circulation and filtration. The duration of operation depends on pool usage and water conditions. Refer to the pump manual for optimal run times and filter cartridge cleaning/replacement schedules.
3. Safety Guidelines
Always supervise children when they are in or near the pool. Do not dive or jump into the pool. Ensure the ladder is securely in place before use. Familiarize yourself with all safety warnings and guidelines provided in the full product manual.
Maintenance
1. Routine Cleaning
Regularly skim the surface for debris and vacuum the pool bottom to keep the water clean. The included pool cover should be used when the pool is not in use to minimize debris accumulation and reduce water evaporation.
2. Winterization
Before winter, it is recommended to properly drain, clean, and store the pool. Follow the manufacturer's guidelines for winterization to protect the liner and frame from cold weather damage. Store all components in a dry, protected area.
3. Patching Leaks
In the event of small leaks, especially pinhole-sized ones, a common method involves using waterproof adhesive tape (such as Gorilla adhesive glue) to patch the affected areas. First, drain the pool to expose the leak. Clean and dry the area around the leak thoroughly. Cut a patch from the adhesive tape, ensuring it is larger than the hole. Apply the patch firmly over the leak, smoothing out any air bubbles. For best results, apply patches to both the inside and outside of the liner if possible. Allow sufficient time for the adhesive to cure before refilling the pool. Regular inspection of the pool liner can help identify and address small leaks before they become larger issues.
Troubleshooting
For common issues such as cloudy water, inadequate filtration, or pump malfunctions, refer to the detailed troubleshooting section in the full Intex product manual. Ensure all connections are secure, filter cartridges are clean, and water chemistry is balanced. If problems persist, contact Intex customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand | Intex |
| Model Number | 26741EH |
| Dimensions | 15' x 48" (180 x 180 x 48 inches) |
| Shape | Round |
| Water Capacity (90% full) | 4,440 Gallons |
| Material | Alloy Steel, Plastic, Polyvinyl Chloride (PVC) |
| Filter Pump Flow Rate | 1,000 GPH |
| Assembly Required | Yes |
| Indoor/Outdoor Usage | Outdoor |
Image: A visual representation of the Intex pool's dimensions, indicating a 15 ft diameter and 48 inch height, along with its 4,440 gallon water capacity.
Warranty and Support
This Intex product is covered by a manufacturer's warranty. Please refer to the warranty information included in your product packaging for details on coverage and duration. For technical support, replacement parts, or any inquiries not covered in this manual, please contact Intex customer service directly. Contact information can typically be found on the product packaging or the official Intex website.